Recent content by tractoroldhard

no smoke either? or too weak

basically it few seconds fast spin then 1 second slow spin 2 second fast spin 1 second slow spin etc

i sprayed it into the engine while it was spinning, but i didn't really get anything, how fast does it have to spin to combust something? Maybe starter motor is to weak to push the last bit of important compression

The injectors are not getting fuel past them but its getting fuel to it, so I'm trying to clean them at the moment

Its a MF 220 1980's Its not a smooth spin when when the cylinders reach the top it becomes harder to pull and requires more effort to spin but then its free and repeats I'm assuming thats compression?

I wanted to test to see if the injectors were bad or it was just not combusting but when I put Starting fluid into the air filter hole no combustion happened no SMOKE at all Its a MF 220 1980's Its not a smooth spin when when the cylinders reach the top it becomes harder to pull and requires...

unscrew the copperwire thats connected to a bolt left to the picture right? Then trying short it and hold

I'm trying to test my starter motor with hot wiring and screwdriver. All I'm getting is sparks no noise no sound nothing. Just sparks when connected.

Hi, I'm trying to remove the dashboard. I unplugged the main wire connector so it won't pull on the gauges but I can't remove the steering wheel I'm not sure how?

trying to get access to instrument pannel wires behind the dashboard but the diesel fuel tank appears bolted next to it and I need to remove but after removing the 3 bottom screws it didn't move a bit. I'm not sure what bolts i need to remove and i cant even fit my socket wrench in these tight...