TractorTech's latest activity
-
TI don’t have access to you model of machine. However, it’s not hard to convert inches to mm. Multiply the length value in inches by 25.4.
-
TTractorTech replied to the thread Snap Ring Pliers. .I've had this set for years. Really versatile.
-
-
TTractorTech reacted to ColdBlackWind's post in the thread Farmtrac 60 steering cyl leak with
Good Post.
To wrap this up. Had new hoses made and replaced tie rod ends. There was still some drama before I could finish. Once I tightened the... -
TThat 'splains it! Thanks.
-
TTractorTech replied to the thread Shredder Gearbox help.That would be the best way to remove the shield washer and the seal.
-
TTractorTech replied to the thread Shredder Gearbox help.Welcome to TBN! I can't see a plate over the seal, but you could probably pry it out.
-
TTractorTech replied to the thread 1715 throttle cables.You are missing #12, rubber bushing that goes over the cable end bracket
-
-
TTractorTech replied to the thread Ford 3000 power steering repair.Just saw this. You can see the parts and order from here...
-
TTractorTech reacted to masseyrider's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
Years ago I was doing some tractor work for a local nursey. I was supposed to go and rototill a field for planting. I hitched up and...
-
TTractorTech reacted to EddieWalker's post in the thread Grease - is there no better way? Can we talk about this? with Good Post.
A Dealer told me that most people use too much grease, and they need to learn to only put in enough to do the job. I've gone back to...
-
TTractorTech replied to the thread 1984 Ford 445 Industrial won't go in REVERSE.Welcome to TBN! Your 445 is an earlier version power shuttle that requires the engine to be near idle when shifting from FWD to REV or...
-
TTractorTech replied to the thread Liquid transfer pump.Agree on a spray pump like a Hypro Shurflo diaphragm pump or equivalent
-
TTractorTech reacted to K5lwq's post in the thread Water pump removal and installation for massey furguson 431 with Good Post.
You need to remove the fan first. The pulley may come off with the fan so you can get the bolts out.
-
TTractorTech replied to the thread max26xl wont start and no lights on the dash.Welcome to TBN! If whatever he did blew out all of those fuses, it's a good chance it fried some other terminals or contacts. You say...
-
TTractorTech reacted to ColdBlackWind's post in the thread Farmtrac 60 steering cyl leak with Good Post.
Just a side note on this thread. Got the cylinder back together. If you spring for the cheap installation tool they are like razors...
