Recent content by trouble007

i will let the pics speak for themselves All 1" plate oxy propane cut and welded with 7018 1/8" around 125 amps 3"x30" cylinder with 3/8" hose no orifices

alright major problem and at the worst time we have a JD 4200 and the PTO light is on which means we cant start the tractor which means at 7 tomorrow when the crew shows up we wont have the tractor running thus large amounts of lost money. any ideas about how to bypass the switch or get the...

i have a chance to purchase a millermatic 250 for $1000 is it worth it its a big welder and a little overkill for what i need but my mod is go big or go home. also anyone have any complaints about it? Thanks Ryan

hi im looking to puchase a miller Maxstarｮ 150 STH. i was just wondering if anyone had used one for either stick or tig and what there experiences were also its rated for 150 a 26v whats the thickest steel i can weld with it? thanks ryan

hi, we have a versatile 500 that wont start it cranks fine but wont turn over. we have tried either but no luck. the tractor has been sitting for 3 years so it might have lost prime. is there any way to manually prime the tractor? is there a fuel shutoff? the tractor has fuel in it. thanks Ryan

we have a JD 4040 that once warmed up looses the power steering. we have changed the filter and the oil with no change and have also checked to see if the rad is plugged and its not. the block above the right hand remote when looking at the back gets hot to the touch when running. the pump was...