winston1's latest activity

I would think there is a problem. There should be minimal slack when rotating tires. Only caused from minimal gear backlash. My first...

That is the part number given in the 2020 parts manual so I think it should be correct.

I believe that is the lower housing gasket. If I am understand correctly he is looking for the axle housing to gear case o-ring.

https://www.tractorpartsasap.com/front-axle-housing-to-elbow-o-ring-new-yanmar-182425.html?Screen=PROD&Product_code=OR-70 Probably an...

Thinking they are 6002...

Yes, that is a problem, #39 has a cam on the end of it and #41 must be allowed to turn freely on it.

May be correct, but I have never seen the spring hooked on the air breather before.

When you move your control lever to any position your lift should go to that position and stay there. You are right in your thinking...

https://www.tractorforum.com/threads/yanmar-ym240-hydraulic-service-manual-yt7707-165e.51705/ Yours is similar to this. Watch your...

Manual: Box

I have heard of piston sticking. .

Is the stop valve open between your legs? Round handle. Try moving pin handle valve on side of control valve under the seat different...

https://web.archive.org/web/20210301033613/https://www.hoyetractor.com/valve-set.htm