xyz123's latest activity

Fuel residue in valley of grey plastic where fuel lines meet then rearward where lines go in air box plastic. No fuel residue forward of...

I'd still be changing tank vent to see if that. Letting pressure build up and push through. Only a few bucks or 10 afm ones for 8...

I would start at checking or replacing tank vent and go from there. Easy peasy, get into trouble shooting mode. Your not the first and...

You will see your fuel lines and tank vent under there. Here I popped one for ya. Just follow your lines looking for leak.

Decal in air filter area? Pics are worth a 1000 words, show us something please. Decal in center section. Lift up that piece and look...

Check bar oil tank. I have heard of guys that have oem had this happen before. Usually after a drop etc though. Dump it in something...

Pics shown of a stihl 363 that been shipped over to US. Is supposed to be carbed version of the new 400. But thats where it stops...

Owned one. Nice built saws run like any other saw in the cc class. Hard to sell due Efco built and parts supply. Basically almost...

As a brand these saws are too new to gage reliability. But since they are mechanically identical to the V-Modest I would call them...

The final setup

So over the last few weeks I’ve had the chance to go over quite a few of these JonCutter 2511 saws. While by and large they are pretty...

Pushing down hard with 3/8 8T testing

Thats what he was showing in steps before adding a H to the carb to turn it down. The plug at end is after riching it up. 14 without a...

You can tell on the husky clones when they get one backwards. The brake handle will be real close to top handle. What their assembly...

Husky has the Friday built saws too. Was alot of them too. Stihl too. Friend just showed a new stihl the squish was off and hitting on...