Recent content by Ym1401King

I went to look for some plans that I used to have, and am sure that the X has thrown away by now. But when I go to the following link, I can't get these plans. Does anyone know of any plans that are out there that describe the plans for a front scoop like a Johnny Bucket? Site Map I couldnt...

Does anyone have an e-mail for Rokon Red or anyone else that has put a front implement lift on a tractor? Or does Lens or someone like that have plans for putting a front lift on a tractor? Aric mykids32@juno.com

Would someone please explain a few simple things about hydraulics to me. Let me explain my project. First off, I have a Yanmar 1401 tractor. I am adding an adaptation of a thing called a Johnny bucket. It can be seen at: www. johnnybucket.com . I need to plumb in a cylinder on the...

I know that this has been asked before, but for me, I have a quick question. Let me preface this with saying that I know little about hydraulics. I am considering adding a loader to my YM1401, but I need the divide block with the outlet, and to know what are the parameters on the system. It...

Hello. I have both a statement and a question to make. First of all the question. On my 1401's dash there is the rpm guage. On the said guage there is a red line about 2100 or so, and then the lines keep on going on from there. Is that little line indicative of where one should keep the...

I have a weird question. A friend of mine was telling me that if I took a pair of 16" wheels from a Chevy that was a 6 lug configuration that is is the same wheels at the 8-16 tires that I have on right now. I want to put on a pair of snow tires so that I have spare tires and wheels to mount...

On my 1401D, there is a fuse box, and it has a fuse for the darned turn signals. It is always blown out. So, I put in a 15A, and it blew it out fast. One of the turn signals works great, when the fuse will work, but as soon as you hit the other one, then you get the blown fuse. I noticed...

Where do I find Tractor Ernie's web site? Aric YM1401

If you look at the 3-pt that TractorErnie manufacturers, you will see a pin that is threaded on one end, and goes into the lift arms of the tractor, which attaches an adjustable arm, with a ball end to, the said pin and goes to the lift arms. I want to know where to get the said pin. I hope...

Has anyone ever put a hydraulic cylinder or something like that on the front of your tractor to lift/lower a blade or something like that? I was thinking of somehow adding a blade to my tractor for snow removal this year, for snow, and was wondering about ideas on this, and if anyone has...

I was thinking about adding a front snow or other materials push blade on my YM1401, but there is not a hook up nor a way to lift the darn thing. Does anyone have any ideas? Thanks, Aric YM1401

I am thinking of building a rear blade for my tractor. I am thinking about using a piece of 2x4x1/4" thick square tube that is 28" long, and then put in a piece of 1 1/4" pipe as a collar (cutting a hole in tube, and welding in the collar). Then I will have a piece of solid 1" rod as the king...

I have a YM1401 as was stated above. I went to my "welding butler" and asked him how much to fabricate one, and he said it would be about $100. Of course, that is not painted, and with the " if it breaks I will re-weld it for free" guarantee. But, I want a 4' one. Who has one? I am sure...

4\' rear blades???` I have a YM1401 tractor, and am thinking of buying a 4' rear blade. I debated getting one made, and the guy that does all my welding ( I call him my "welding butler"), said that he could make one for about $100.00. But, I still have to get it painted. So, I want to know...

Does anyone know where I can get a few replacement tiller teeth for my RS1201 or RS1202 tiller? I need about 2. Thanks Aric ym1401