macdoesit
Bronze Member
- Joined
- May 7, 2021
- Messages
- 62
- Tractor
- Mitsubishi MT 2801fd Loader
If your FEL is slow, take the boot off the joystick and check that all allen bolts at the base of joystick are tight.
My bucket down tilt got from slow to not working, I finally took the boot off and one allen bolt had backed off 1\2 inch, it was not letting the joystick engage the tilt down valve, to much slack, tightened it and all is well again.
Thought I would mention this as I almost ordered another valve and would have probably replaced without taking the boot off the old one.
My bucket down tilt got from slow to not working, I finally took the boot off and one allen bolt had backed off 1\2 inch, it was not letting the joystick engage the tilt down valve, to much slack, tightened it and all is well again.
Thought I would mention this as I almost ordered another valve and would have probably replaced without taking the boot off the old one.