trail clearing technique and tools

[2manyrocks]

Middle TN had mid 80 temps a few days ago. Neighbor ran into rattlesnake working the fence line yesterday.

 

[jjeff]

Eastern UP and northern LP could definitely use your expertise and experience clearing trails due to the ice storms this spring. Everyone I talked with since the storms say it's a complete disaster around there guess most rec trails in that area will stay closed this summer.

 

[ArlyA]

Trail machine news: We are looking at used 4 series JD tractors to help us with trail work for Boundary Road trails or at the properties we have been looking at for purchasing. Inflammation in my wrists gets bad and hurts even when I do minimal manual work anymore. We'd need to also get a backhoe and other accessories to go along with it. Just can't do much anymore. No need to get into a best brand fight here....

 

[airbiscuit]

A 4 series John Deere would be a nice tractor. I wouldn't rule out a 3 series either if you find a good deal.
I always struggle with the backhoe question. There a those who say they would never be without one. There are those who who say they seldom get used and/or are a pain to mount/dismount/store. For what they cost, I might go without on my CUT, and buy an old school industrial tractor/backhoe, or a cheap mini ex. YMMV

 

[ArlyA]

A 4 series John Deere would be a nice tractor. I wouldn't rule out a 3 series either if you find a good deal.
I always struggle with the backhoe question. There a those who say they would never be without one. There are those who who say they seldom get used and/or are a pain to mount/dismount/store. For what they cost, I might go without on my CUT, and buy an old school industrial tractor/backhoe, or a cheap mini ex. YMMV

JD's modern ones like on the 4 series seem pretty easy to get on/off.

 

[Mtsoxfan]

I like to carry a steel cutter for my weed whacker as well as a circular disc chainsaw cutter for it as well. My steel cutter only has 4 cutters on it, and will only cut saplings up to about 1/2".

 

[airbiscuit]

JD's modern ones like on the 4 series seem pretty easy to get on/off.

Not something I'd like to do weekly.

 

[Smokeydog]

JD's modern ones like on the 4 series seem pretty easy to get on/off.

Sure like the Kubota TLBs for my mostly wooded hillside property. 4-post ROPS. Seat swivels so can reach backhoe controls to swing when operating forwards for balance. Heavier built than ag tractors. Great operator deck. Easy 3pt to backhoe change.
Feel your pain. Not as able to do as much hand work anymore. Recently bought a Precision miniclip this spring.
Most trees and limbs under 7”. Being able to reach up nearly 20’ a game changer. Cleared several acres worth of boarders and trail encroachment. Moved a least 100tons of debris. Today went over the areas with the Brown tree cutter to chop up, mulch and level to hopefully maintain with the flail cutter. Very little time spent using chainsaw or off the tractor. Wife impressed. Already being enjoyed by the deer and turkeys. Easy hunting for the owls

 

[ArlyA]

On the trails today for spring cleaning..

 

[hayden]

It's really easy (and fun) for all of us to spend your money, so here goes since I think my site and uses are pretty similar to yours.

I suspect snow removal will be part of any property that you would consisder, and I think you are in area that gets a lot of snow. If there is any chance that a snow blower on the tractor will be a consideration, I think you should strongly consider a cab. It makes such a huge difference when snow blowing. Also for other work around trees and limbs like for trail maintenance, the added personal protection from swings, slapping branches is another compelling reason for a cab. Plus you aren't sitting on a wet seat after it has rained and snowed, and the controlls will generally be better preserved vs sitting exposed all the time. In fact, I think teh only reason not to have a cab is cost. In every other way they are a big plus. I would never go back to an open station.

If you have a choice, I would get R1 Ag tires for your application rather than R4 Industrial tires like those in the picture you posted. Industrial tires are great on hard packed surfaces, but they really suck in mud and snow. The treads pack up with material and they turn into slicks. For anything other than hard packed surfaces, I think R1 tires are a much better choice. A size like the Deere 4 series, or a Kubota Grand L or MX series is probably the right size.

But cost is always a factor, and you gotta do what you gotta do...