Oil & Fuel YM2500 Pushing Coolant Out the Radiator

[Travis_R]

Well, I just couldn’t resist.

Very glad I made the decision to paint the muffler a more glossy black!

 

[Travis_R]

Here’s a couple pictures of the Seymour MatchMaker FP-2 Tractor Implement Red that I used to touch-up the paint on the tractor. It was sent to me from Fredricks Equipment.
I have a little more to do today with the red.

 

[Travis_R]

I tried to stop a leak with RTV Silicone on the side of the fuel tank, but was unsuccessful.

I emailed Danny at Fredricks and he is sending me a new fuel tank and a new fuel cap with gauge.
I also requested a can of White spray paint so I can touch-up the paint on the rims.

Fredricks Equipment are good people to deal with and they truly do stand behind what they sell!

 

[careyo63]

I used a piece of vacume hose the smaller return line fit into. I was able to keep the Org. tank. I had to do something. Major leak Esp. close to or a full tank of fuel.

Attachments

• 
  003 (2).jpg

  499.8 KB · Views: 238

 

[Travis_R]

I used a piece of vacume hose the smaller return line fit into. I was able to keep the Org. tank. I had to do something. Major leak Esp. close to or a full tank of fuel.

Attachments

• 
  003 (2).jpg

  499.8 KB · Views: 238

I like keeping things as original as possible. I don’t know why, but that’s how I am. Glad you were able to keep the original tank.
Is that your air filter housing sitting on top of the engine? Never seen a setup like that.

 

[careyo63]

Mentioned it before but both Yanmars came from a Fredrick's supplied dealer. The first one is the Ym2000 And it is org. Complete! Looked like It just rolled off a boat!! INKY.. Then a Refurb Ym2500. I knew his location and what he sold. Atl. motor speedway back then. Just went some Grn. new deal I think there calling it now?.... Not a Deere.