Better Lynch Pin?

[Robert walker]

Is there anything more secure than this style of Lynch pin to the lower lift arms?
I keep losing them while brush hogging. I'm thinking about using a bolt and nyloc nut, but that would be a pain.

View attachment 3820479

I buy the black lynch pins. They have a lot stronger lock ring. A little more expensive but well worth it. I get them at tractor supply.

 

[rv7charlie]

I've got the 'regular' versions that get lost, and my high-$ finish mower had the so-called 'locking' style others linked, two of which have disappeared. The cure is a bolt with a 'nyloc' self-locking nut. Considering how seldom I *need* to remove a pin, and how often I have to replace them due to loss, bolts and nylocs are less time consuming. And cheaper.

 

[ljgordon]

Is there anything more secure than this style of Lynch pin to the lower lift arms?
I keep losing them while brush hogging. I'm thinking about using a bolt and nyloc nut, but that would be a pain.

View attachment 3820479

I bought a pack of 4 locks all keyed the same and keep the key on key ring and a spare in the tool box. I did this after a pin came out. The mower shifted left, caught a 5-6 inch dead tree, pulled idown on me. Before I discovered what was happening limbs were under the clutch and I couldn't get to the key. Tractor finally stopped when FEL hit a tree. Lots of scratches and 4 cracked ribs.

 

[tomkatohio]

How about a shackle with a pin length and diameter to fit the end?
The pin in some are "captive" and can be tightened securely and alo be loosened fairlly easily.

 

[jdmeth]

I used bailing wire, a couple of twists round and round and no problems.

 

[WinterDeere]

Every damn thing about working with farm equipment is trying to injure or kill us.

Reminds me of the speech my shift manager gave me, my first day working fast food, around age 14. He said something like, "everything in this place is either hot, sharp, greasy, or or all three, and they will mame you if you don't pay attention."

The back alley of the kitchen that ran in front of the deep friers and all the way to the dishwashing station was like a skating rink, lined on one side with sharp knives and deli slicers, and the other with boiling baths of oil. Fun place to go for a slide with a 40 pound tray of steaming hot chicken bits in your hands.

 

[Teachu2]

I went to a Pat's Quick Change setup and grade 8 bolts with nylocks. No issues since, and changing implements is a whole lot easier. They go on sale here annually.

Pat's Quick Hitches category 1 — PAT'S QUICK HITCH

Pat's Easy Change Quick Hitch Category 1 includes a stabilizer bar, 6 lynch pin washers, and free shipping. Pat's leaves your lift arms free to accommodate any width implement.

www.patsquickhitches.com

 

[Deanes]

Just use a large washer next to the hitch. Problem solved.

 

[cornrunner]

Is there anything more secure than this style of Lynch pin to the lower lift arms?
I keep losing them while brush hogging. I'm thinking about using a bolt and nyloc nut, but that would be a pain.

View attachment 3820479

There IS...it's a locking type of Lynch pin. Sorry I don't have a photo. If you use "regular" Lynch pins, orient the pin so that the weeds/grass can't easily grab onto the loop when traveling forward. On that locking style, the loop part has to be squeezed before it can be rotated/released.

 

[rv7charlie]

There IS...it's a locking type of Lynch pin. Sorry I don't have a photo. If you use "regular" Lynch pins, orient the pin so that the weeds/grass can't easily grab onto the loop when traveling forward. On that locking style, the loop part has to be squeezed before it can be rotated/released.

See earlier posts. If you ain't lost one, ya ain't trying hard enough.