Harbor Freight framing nailer

   / Harbor Freight framing nailer #1  

Tororider

Veteran Member
Joined
Aug 24, 2007
Messages
1,707
Location
SE Michigan
Tractor
JD 4310
Anybody have or used the Harbor Freight 10 gauge framing nailer? It is on sale for $49.99. I don't do a whole lot of nailing, but thought this might speed up what I do.

They also have a nailer/stapler combo for I think $17 dollars.

Man I have to get over to the sidewalk sale!
 
Last edited:
   / Harbor Freight framing nailer #2  
I do not have that particular one, I have their flooring nailer, finish nailer, stapler, brad nailer. I have been very pleased with them, and if they all broke today, I would pitch them and go by another just like them.

I have a Bostich Framing Nailer, and I sure do like using it when sticking stuff together.
 
   / Harbor Freight framing nailer #3  
It's not the best, but it's worth 50 bucks for occasional use. I have one I leave out at some rural land, but I do prefer my PC nailer which I keep at my house.
 
   / Harbor Freight framing nailer #4  
I paid $89 for mine when I made my deck 2 summers ago. It worked well, I only had 1 issue, the pin that holds the trigger in place kept working out so I put a big dob of hot glue on in and it worked just fine.
 
   / Harbor Freight framing nailer
  • Thread Starter
#5  
I ended up getting the brad nailer/stapler combo pack that came with an assortment of staples and brads for $11.99, normally $49.99. I don't do much so I figure I can borrow a bigger nailer if I need to and this would be great for little things around the house. Can't go wrong with the price either.
 
   / Harbor Freight framing nailer #6  
I bought the brad nailer/stapler. It works ok . On mine I have to pull the trigger 2 x to get it to shoot a nail/ staple. It was like this new
 
   / Harbor Freight framing nailer #7  
kenmac said:
I bought the brad nailer/stapler. It works ok . On mine I have to pull the trigger 2 x to get it to shoot a nail/ staple. It was like this new

I have this as well, seems to do a better job if you run it at 100psi.
 
   / Harbor Freight framing nailer #8  
I have a few HF nailers. The best is the 28 degree framing nailer - I've shot about 5000 nails and it pretty much never mis-fires. I have the concrete T-nailer and it seems similarly dependable although I've only made a few hundred shots. I have the brad/staple gun from Homier and it is pretty good but not as dependable as the big guns. The small guns seem more sensitive to lubrication where the return cycle will not pick up a new nail.
 

Tractor & Equipment Auctions

2017 Toro Z-Master 7000 Series 70in Zero Turn Commercial Mower (A53421)
2017 Toro Z-Master...
2016 Chevrolet Tahoe SUV (A51694)
2016 Chevrolet...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
1969 Lincoln Continental Mark III (A51694)
1969 Lincoln...
(2) UNUSED Metal Garden Arbor Trellis (A53117)
(2) UNUSED Metal...
2016 RAM 5500 Bucket Truck - Cummins Diesel - Auto Trans - 4X4 - Altec AT41M Boom (A53473)
2016 RAM 5500...
 
Top