Search results

I use my tractor mostly for snow removal... So I got to thinking, my 3720 Cab is now over 7 years old. It's held up great, my first real problem was the front drive shaft, which was a simple fix. So my question is, in a year or two, if I get a new tractor, is there anything like a Ziebart...

I have a question about my front drive shaft. I lost a roll pin that goes into the coupler that slips over the spline that powers the MFWD. So my question is, is there a hole on the spline that this roll/spring goes through? Or is the hole located on the actual driveshaft itself? Or is the...

I never take off my loader, I have no reason to. All of my bolts were tight, and the mast adjustment was tight. So I was digging into a pile of gravel, and the load I was biting into was a little to the right side of the bucket......... Then BAMMMMM!!!!! My Right foot window popped and...

On my 3720 Cab, My brakes keep getting stuck on me.... I noticed there is no grease fitting on the lever that the Cable is actually pulling... just a spring.... It will really bog the tractor down, at full throttle, the best speed I can do is 4 mph, when they get stuck.... I keep having to...

On my tractor, as of just recently my steering wheel has a lot of grinding shimmy to it... this is happening when I'm driving the tractor straight, and let go of the wheel, the wheel will wiggle back and forth, about an inch, like a vibration... I've checked the fluid in front axle: looks...

This is strange, I only have about 1" of workable motion, on my 3 point hitch lever.... (The lever will move all the way back and forth) But what I mean is, I can't go any higher than the number 4, and the relief valve kicks in, (implement makes it way all the way up) But I can't go any...

My A/C doesn't seem to be cranking out the cold air like it should. I checked to "Feel" any wind leaks in the roof seal.. Filters and Screens are clean as could be. A/C definitely kicks in when you throw the switch, because you can see the Tachometer do a little drop in engine speed. So do...

Well, I finally got my machine back from the dealership service dept.. (Slow as molasses) I'm not happy with my dealership at all, they've had my tractor for a about 5 weeks before the snow fell this year, then ran out of time, and had to send it back to me because I needed it so badly, (only...

I understand the 375 Backhoe is the one that fits the 3000 series cab tractors. But my question is why? If the open station can handle the 485, why can't the cab handle the 485? Will it still fit the same unit, but just not recommended? What exactly is it that is limiting the Cab tractor to...

Is it possible if as many of you guys can, can post a picture of the bracket that holds the 2 couplers on for the 3rd function hydraulics... I've had trouble with my loader hoses since day one.. and of course I kept trying to tell my dealer that he is wrong on how they are mounted. Because I...

Ok, what is the exact sequence of making your Rear Pto work (for woodchipper) without you being on the machine... I know I've made this work numerous times in the past (about a year ago)... I've told the dealer I had problem making it work by itself.... Then they told me a few weeks later...

I was wondering if some people here can show me some picture of their (specific-ly) of there 3000 series CAB Tractor with the Optional 3rd funtion hydraulic couplers... Reason I want to know, is because I'm still convinced my service manager doesn't know how the plate holding the couplers is...

I've had my machine up to my JD dealership for about a week now... I wanted them to service it before a long winter of removing snow.... but I also wanted to fix a bunch of little bugs with my tractor before it is totally off warranty next month... I had them change oils/Grease... blah blah...

One thing that never made sense to me with the John Deere Light Switch Dial is... if you are using your "Work" lights.. you can't use your Warning/Flashers at the same time? Why is this? If you are using your work lights, more likely you are working the machine... and flashers should be used...

On my 3720 Cab... the Black Paint is chipping and flaking away... near my rear axles, and near my 3pt Hitch Arms... My Black paint on my Rear Wheels... The Black Hub in the center of the tires flaked off quite a while ago.... anybody else? I'll post pictures of it later.

Has anyone else seen or heard of any of the latest news on the Backhoe Modifications for the JD Factory Cab Tractors? If any of the Dealers here have pics of the setup I would love to see it. I want this set up so bad.... I do know I can put a Woods Groundbreaker X on my machine as of now...

The other day when I was walking towards my tractor straight on, I seemed to notice that my bucket didn't seem exactly centered with the machine. I know about checking tire preasure, and adjusting the loader mast nuts. But does anybody know what to do if your loader seems to be 3 or 4 inches...

Does anybody know of a way to make my work lights and flasher lights come on at the same time? Is there a switch I can add or something to make this happen. My reason for this is in the winter when I'm clearing snow, I'm usually in a pretty busy parking lot. I need my flood lights, but would...

My friend who lost his JD4300, due to an electrical fire a few months ago, is finally getting paid from his insurance company. He was in talking to his JD Dealer, and told him if he could wait until next summer, JD should have their newly revised 110TLB out with their own factory Cab Option...

Ok, If you could change anything on your tractor, it could be something never thought of before, or something you may have had on your previous John Deere, Or Other Brand, What would it be? I know I really miss the Feel & Feedback that I used to have on my JD 4200. I do have to say I love the...

My friend who does landscaping / Property Care, just lost his JD 4300 to an Electrical Fire. He had his machine parked at the jobsite and it hadn't been used in about 4 days. The owner of the property had to call the Fire Dept because he came home and saw flames coming out of the tip of the...

I just noticed yesterday that when I engage my 4WD Lever on my Cab tractor that it is not lighting up on the dashboard. The Tractor is engaging 4WD, and the actual Lightbulb does work, because when I turn the machine on it lights up for 3 seconds along with all of the other dashboard light...

I don't really know if this is a big deal or not, but latley I've been noticing one of my Loader Posts seems to wobble, while the other is completly tight. While sitting on the tractor, looking out the front window, my left loader post mount is very tight, my right one seems to wobble quite a...

Well John Deere, just announced today on their website, the new economy tractor, the JD 3203! It looks like a pretty good basic machine, for those of you wanting to skimp on pennies and extra frills. check it out on deere's site, news release on this tractor is located in the latest news...

This is for BUCKIE2, sorry my computer doesn't show that I replied to your Private Message Question. I did reply, but it shows that I have no sent replies. So I will post my answer to your question right here. QUESTION: just traded my 2210 for 3720 which is to be delivered soon. the dealer is...

Here is my question? Why do you think John Deere even makes a 300x Loader? When the price difference between the 300x and the 300cx are so minimal? I was talking to a friend of mine that I haven't seen for awhile, and he is ordering a 3720 Cab Tractor, very similar to mine. First after...

Ok, these pics are better, because the sun is out when I took these.. The last shots didn't come out good at all.... so to all the guys who Sent me a private post of beter pics here you go...

Here are some pictures of my New Cab Tractor. Sorry they aren't very bright, it was just starting to get dark when I took these photos... However, I have no regrets with this machine.. I Really like it so far... I'm waiting on my Rear Work Lights, Rear Windshield Wiper/Washer, and Bolt On...

I am very impressed... I can't believe how quiet it is inside of the cab with the engine at full blast... I kept thinking my throttle was working it's way back down.. but it wasn't.. it is just a very quiet space... I could even talk normally on a cell phone while working in it today... I will...

Ok, I just went to my dealer... to check out the progress on the tractor.. They are almost done. Just need to fill the tires, and put the loader on, and assemble the Hyraulic Cylinder for the 74" Rear Snowblower. So hopefully tommorow is finally the day I've been waiting for... The Tractor...

I've always had mechanical Hydro tractors in the past. And it is funny because you can actually feel what your tractor is doing right through your foot... it eventually becomes you after a short while of using the machine... now that I have a new 3720 Cab model coming in a few days, I honestly...

Yesterday I ordered a new tractor. John Deere 3720 with Deluxe Factory Cab: Air Ride Seat, Mid PTO, Mid PTO Independant Control Selector, Dual & Single Rear SCV, Electric Diverter for 4th & 5th Rear SCV, Rear Auxillary Work Lights, Vertical Exhaust Kit, Automotive Cruise Update, Audible Horn...

I just noticed on JD'S Website Configurator, that it dropped its prices quite a bit on 3000 Twenty Series. I guess, they must have done this after the disontinued 0% financing. On the package that I'm about to order, it saved me almost $3000.00 total off the MSRP. I think this is good news...

I live in the NH Seacoast area, and we have two dealers in this area, one works off MSRP -8% without a trade, the other works off about -10.25% off MSRP. Now I'm not a cheap person, but I do want to pay what is a fair price for a 3720, with cab, 300cx loader. Any suggestions on if this is...

After waiting for a JD Compact Factory Cab Model for over ten years. I finally sat in one and gave it a good inspection. I'm in love. Visibility is superior. Noise Level is great. The Cab is totally isolated from the engine compartment, to lower sound levels. The Front of the Cab is one...

I have been in the market looking for a 3720 with Factory Cab. This is what I wanted for a complete package. 3720 with Cab, 300cx Loader w/73" HD Bucket, Bolt On Edge. Larger R4 Tires, Filled with Calcium. Deluxe Cab package offers Mid Pto, 3 Rear Remotes, and Air Ride Seat. One quote from...

I would like to know what the road speed of the 3720 goes for in MPH. The UK site says 33KMH. That comes to a speed of 20.5 MPH. Is this a typo? or do you 3720 owners know if that really is the correct speed. It seems quite a bit faster than previous models. I am seriously thinking about...

I have a Jodale Perry Full Cab for my JD 4200 HYDRO, Best add on I've ever made to the tractor, but Jodales website left a lot to be desired, they didn't have many pictures in the past, but now, they have tons of pictures in their photo gallery, with more still to come. Take a look, and see if...

When I had my tractor in at the dealers while they were putting the Cab on it, I had them go through the whole machine, and if they saw anything that needed changing or fixed to go ahead and do it. So they fixed my Loader. It was kind of sloppy at the rear mounts. It was always this way...

I posted pics of this cab for you all to see. Boy! am I happy that I didn't settle for anything less than this cab! It took awhile to come, (of course I ordered it in the dead of winter). But I'm in love with my tractor all over again. Everybody at the dealership was talking about it and...

This week my new Jodale Perry Cab should be coming in for my John Deere 4200 Tractor. I can't wait till I get it. I've looked at several cabs, but I wanted something that does the job and also looks like it was factory installed on the tractor. It is the New Boxer Cab design, very sleek...

I was out today trying to dicker with prices. I have dealt with this dealership for 14years now. (JD 855 was my first purchase in 86' 2nd purchase was a JD 4200HST purchased in1999) So he is known to be the biggest and most prominent New Hampshire dealer. (NO SALES TAX IN NH) And the price I...