Search results

I am not talking about a 5K series, I am talking about a 2002 John Deere 4210 compact tractor that is 28 HP with E-Hydro. The rear hubs are 6x6 bolt pattern which is a small skid steer hub. I want to put 15-19.5 tire and wheel on the back and I have found a set of 19.5 inch diameter wheels...

Does anyone know if you can buy 6 to 8 lug wheel Adaptors for a JD 4210. I am wanting to put 15-19.5 wheels on the back and I have found a set of wheels that are 8 lug, but my tractor is 6 lug. Are both of these bolt patterns the same as Skid Steer hubs? Thanks for you help.

Does anyone know if a 300e loader fit on a 4210 CUT? Thanks

In my experience, the M series is built heavier with heavier hydraulics and more amenities in the cab than other 5000 series models. I know that they have full frames under them when others like my 56083e use the engine block as part of the frame structure. I always wanted an M series, but...

I had this exact same issue last week on my 5083e, and it was the cold start sensor. Unplugged it, and it fired right up and ran fine. Went to the dealer and got the sensor, and he said he had sold 3 of those the day I was there. Talked to the service manager and he said most people just...

Agreed with above. If your current wheels are fine, I would use them. Since you have 18.4-30's now, you more than likely have 16 inch wide wheels. A 16.9-30 will not like being on a wheel that wide. If you are tubeless, then you will have a difficult time getting that tire to pop out. If...

I might give it a try. Would like to find a 420 loader for it that is for sure. It would be much handier with a loader.

Wow!! what a difference you made. It looks great. Are you going to paint the back half as well? I just acquired a 4210 which is very similar to yours except where yours is metal mine is plastic, and the plastic is faded and broken in places. It only has 700 hrs on it and it is 20 years old...

Those tires will do very good in snow. They also have steel belts in them, so it is harder to poke things through them than a nylon tire. Not impossible, but harder to do. Be sure to air them down to get more footprint on the ground for better traction, especially in snow. I am not sure...

The hardest part of that task is breaking the beads down off the seats and getting the tire off the rim without destroying it. Many ATV wheels have humps in the rim that act sort of like bead locks. That is what allows you to run such low air pressures without the bead falling off the rim. I...

If they are both 23x8.50, you will be fine. The Overall diameter is what you have to be careful of when changing tires on a MFWD tractor. It looks like you are good to go. The new tires will have 2 inches of sidewall less than the old ones. Hopefully the bolt pattern and hub circle are the...

I recently acquired a 2002 4210 MFWD EHydro from my father in law. It has 700 hours on it. I have several questions about so I will list them. When I brought it home, I changed the Antifreeze, Fuel Filter, Air Filter, and Oil and Filter, and topped off the Hydraulic fluid. 1. I have run it...

It sure sounds electrical to me as well. If it is just flat dying with no sputter, its hard to believe it is fuel related. The symptoms you describe fit a coil failure to a tee. Is it possible that the new coil is failing? If you don't have a resistor inline feeding the coil, then maybe it...

I just saw several F-20's in running condition on an auction on Big Iron. They cheated and push started them instead of cranking them. I don't blame them. Neat old tractors. That sale had a bunch of old Farmalls on it. Some restored and some not, but every single one them started and ran...

I think there might have been two things going on here. One is if the tires were set way out, they can absolutely tear up the bearings. If the bearings fail, then they can take out the gears and other components with chunks of metal floating in the oil and having a lot more slop or play in the...

Attached is a picture of the tire that started this whole style of tire. Its an Alliance 550 Multi Purpose Radial. They have had this tire out for 8 to 10 years. It is a radial with steel belts. (think puncture resistance), and it puts down a flatter footprint, when compared to a bias tire...

Ok, so I finally made it to 100 hours on my 5083E, and now it is time to change the oil for the first time. I have had it since Feb 2013. I am going to stick with JD filters, but I am not sure about spending the big bucks for their oil. What kind of oil does everyone run in these utility...

I agree the cab is sweet. When I was looking at moving from a 3520 to the 5083E, I told them I was not interested in a cab tractor and that I couldn't afford it. Then the sales guy said climb up there and start this thing up. So I did reluctantly and he switched on the a/c, and I was sold. I...

Does anyone know if this is where a sub is supposed to go? If so, does anyone know what model of tractor would have this as an option? This is on a 2013 5083E. It looks like a spot for a subwoofer, but I am not sure. I am trying to figure out what tractor would have had this as an option...

I have had my 5083 for 6 months and it has 48 hours on it. I cannot get it to stop leaking anti freeze. I find a loose hose clamp or something and I tighten it, and it springs a leak somewhere else. The dealer came out this summer and said that the heater hoses were crossed, so he switched...

Well, after much deliberation, they finally delivered the 5083E to the house and I said farewell to the 3520. Got the Michelin Radials and the Alpine stereo put in on Saturday, so I am ready to mow some CRP. The tires are far and away better than the bare bones FS that they put on these...