Search results

i sure hope you can help me the controller reads the 2 topcon receivers ok i just am not getting current to the pvg 32 valves and I really don't want to have to level out the garden by hand again to plant text month it takes me a couple days to level by hand i have no problem with mechanics...

i have built a dual laser box scraper but the hydraulic controls don't seem to work you inspired me to build my own i am retired machinist and like projects like this receiver masts are 12 feet tall and hinge down to work on but too tall for in the building i have a motor grader 9164 control...

looking for the wiring for this box scraper set up does any one have part nos from control to valves and receivers etc. help

i am new to this format sorry about asking questons you have already answered i now have the 9164 control and the danfoss valve not sure about the main fall sensor have 2 different numbers 9170 and 9622 think a newer version ?? mayve both do the same thing ? having trouble with the wire...

want to make the same laser box scraper built back hoe bought the wrong valves open center and it became a jack hammer expensive mistake belive there are several versions of the pvg 32 valve want to get the right one and the correct parts for the topcon controls

i would like to know the parts you used for the controls topcon i have johnson laser with slope settings built a back hoe and didnt realize i bought normally open valves which made it good for a jack hammer that was an expensive lesson so want to get the correct controls think the dvg 32 valve...

i want to build lazer box scraper like yours built back hoe bought the wrong valves center open was good for a jack hammer can you give the topcon and control valve info so i dont spend a lot wrong thanks ken