Search results

Have never had this problem on a kubota. When trying to reinstall my FEL today (loader has sat for about 2 months on its stands) white and yellow QD fittings will not install. I think white/yellow are main pistons, blue/red are bucket tilt. Tilt works fine when tractor is running, grapple...

Hi All, I need some TBN advice! I am looking at a new B3000, and have a lot of downed tree/brush clearing to get done. With my BX, logs are hard because it can't really grip anything, so with the B3000, I thought a grapple plus a toothbar would be a great way to go. The thumb on the hoe is...

Hi all, I have heard two different things from two dealers: one says with the Kubota 63" front-mounted blower (B2782A) subframe, even with the blower itself removed, the loader cannot be used, and the full subframe has to be removed to allow the loader to be remounted. He says it takes about...

one dealer says no problem for a 5', other dealer says 5' too heavy. Anyone with experience running a 5' brush mower on the back of a B with any issues? Thanks

Hi all I am trying to trade in my BX23 and implements on a new B3000 and rtv1100 (yeah, I'm really into the cabs now!), and I was surprised how little the dealer offered me for it. The BX23 is a 2005 model with 300 hours on it and is in good shape. Comes with the TLB package, Kubota MMM and...

Hi All, Please help. ran fine for about an hour yesterday, turned off, now it won't turn over. fuses all check good, fuel pump, block heater and starter solenoid run when key turned. Any help greatly appreciated before I turn it in to be serviced. Thanks PW

Hi, I did do a brief search, but couldn't find my problem. After installing the bagger, the mid mower won't come down when I move the 3pt lever. What am I missing? I used the bagger fine last season, but put it back on the tractor myself this season. Maybe I missed a step? Thanks in advance. PW

I was trying to attach the backhoe after dark with a flashlight (dumb move #1) and ended up pinching the lines between the frames. Unfortunately, when this happens, the backhoe can no longer be moved and so it is impossible to UNpinch the lines. I tried to move the tractor around a bit to...