Search results

The same goes for GM vehicles, cars and SUVs that rely on suspension parts out of their Korean Deawoo parts suppliers. Many have gone defunct since covid. GM can't get parts for warranty and nobody can ever get parts beyond warranty either. The Deere 50/55/70/90 series compacts are not well...

My Yanmar is the early YM with the Hp rating yours has, even the same engine family. I too got stuck with a 6FT V-disc harrow. His advantage of disc harrow is 5FT, notched front gang and smooth disc rear gang. The notches up front are more ground busting and grinding while the rear smooth...

Your disc harrow will command a little more than normal asking price as the first gang is notched and the second gang is smooth. This combination provides great tilling over the others being the same disc throughout. As the implement has a majority of it's original paint, $600 to $800 would...

I'd keep both unless someone had a bit of cash over the fair market value. Your Bolens looks to nice. Do you have kids or grandkids, you could keep the Bolens in the family. Good machines are hard to come by a generation or two later. And here are all the manuals for your Kubota...

Yep, its how Yanmar engineered it. It's a simple job. As for the 'lead hammer' a good hard mallet is best to use. These Yanmar made CUT Deere's are 40 years old. Breaking anything as important as this would be a headache finding OE parts. Use Deep Creep to loosen the area up. Even the...

Seafoam was engineered just for this problem in diesel engines and fuel systems. Anything fuel related I clean with Seafoam.

I'll also chime in with the gov and rack, a few quick sprays from the can or drops from the bottle of REM oil does wonders to free up anything binding on that mechanism. I use REM oil on all kinds of things. -20F reaches to the winters I see here.

I just posted where to get the manuals all for FREE here in the other thread: https://www.tractorbynet.com/forums/threads/s-650-g-transmission-shifter-wont-move-into-1st-or-reverse-any-idea-what-causes-this-does-anyone-have-a-parts-diagram-for-the-transmission.460466/

Thanks, I'll keep that in mind. There are so many people looking for those PB100 Mazda engine parts of the S550 Elk and the S650 Bison. Pinned at the top of this forum is a thread with a Mitsubishi PDF model specification document. In the back lists the parts network. I made sure your info...

80W90 90W 75W80 synthetic Stick with GL-4 as the wear protection is higher than the eco-friendly GL-5 with less.

Len, with the supply chain issues and companies scaling back to just the basics, it's really hard now finding replacement parts that work. Then toss in the mix of machines older than 30 years too. For example, For some of the Japan tractor brands, the P15D-25 headlamp bulbs are nearly...

Did you get the manual from my other post yet?

There are over 50 Mitsubishi and Satoh manuals over there. And nearly 200 Yanmar. So far it's the largest repository of both tractor brands on the web.

If you need a stronger spring, the Farm and Fleet or Ag stores sell those. Some springs have long loops on the end as the governor needs to wander a little when high revs are hit. This allows the governor to do it's job vs. full WOT. This saves the engine from internal damage. Now, do...

The manuals are from the Mitsubishi-Satoh community site. https://mitsubishitractors.groups.io https://www.tractorforum.com/threads/satoh-s650g-instruction-book.59790/ https://www.tractorforum.com/threads/satoh-s650g-electrical-wiring-diagram.59789/...

Harbor Freight sells an assorted spring kit. I bet I've used at least 6 out of the 30 in the kit so far. Its been a handy kit to just poke around and notice, yeah, that's the one needed.

The KE95 isn't a popular engine like the KE70. If you do a Kohler V-twin, NEVER use a Courage engine. Only use the Magnum M20 or the Command engines. There are people who repower with the Harbor Freight Predator engines on tractors. There are at least 2 done on YT vids to date. Several...

Yanmars and Shibaruras are like that too. One can swap 2 and 3 cylinder engines. Now the thing to watch out for is the frame rails and mounting holes. Those in a way tell what engines can be swapped and fitted to the frame to simply bolt to the bell housing, work the clutch plate, etc. If...

Virginia can get all dressed up. :) https://jtrading-bg.com/en/tractors/317-yanmar-f235.html

A Mitsubishi D1503 was made in the 1970s. That series are all gas engines. I know people who re-powered them using Perkins engines though.

His machine is a John Deere JD850 right. :) OK, <face-slap> I should not read the forum on a tiny screen. He has a JD750 ! From the TM1242 Technical Service Manual

Do not deviate. Follow the Yanmar info here in the Deere TM1192 Service Technical Manual. You must take the torque down in stages. Read the procedure 2 or 3 times to understand what is being mentioned here. Once you got that, then begin. OK, I'll look for the JD750 data.

Is your machine a Mitsubishi MD1600 ??? This is the Yanmar section.

The first porcupine Lexus !

My neighbor was given some small CAT-0 attachments for his Ford 1500 SCUT. In the bunch was a home-made 55-gallon metal drum with mounting flanges. It was used to scrap the soil to pick up dirt and rocks. It resembled the image below. Howbeit a bit more crude. I just wonder if a 55-gallon...

This one sold for a mere $121 in 2017. The price has increase 9X since then. purplewave.com/auction/170510/item/CC9180/Swisher-ATV_and_Utility_Vehicles-ATV-Missouri

If you don't weld, then this type of bucket bolted together would work with angle steel to brace the seams everywhere. https://ironbaltic.com/us/agricultural/2-in-1-modular-plow-bucket 2-in-1 Modular Plow bucket technical info --------------------------------------- Material: Powder coated...

Really? The price jumped that high? It was $299 at Home Depot in November 2019 the last I looked. WOW, it's $890 now. Crap. Northern Tool right now has the best price of $850. zoinks.

On the bigger tractor (1st one) the REL isn't too far out. The 1st one does have the top-link hydraulic dump controls. If you don't go with a hydraulic top-link, an electric linear actuator would do the job too. Some are fully capable up to 4,000-lbs with infinite travel between end-stops...

Long as the boards do not exceed 2FT from the tailgate, no red 8x8 flag or material is needed in most states. If the wood is heavy, he wouldn't need straps. No quick take-offs. And yes, it would of been way better to have a ratchet strap around the whole bundle to contain single boards from...

YES, I've looked it over several times. Back around 2010, a REL would cost $700 with hydraulic controls for the top-link! The price has more than doubled since then. The bucket is only $300. It's the Swisher ATV bucket with added 3PT brackets. And can be adapted for...

Pull the bulb, take a pix and post it here. If there are numbers on it post it here too. :)

Found a few for your machine, even our EU Greek supplier who has been great working with the Yanmar Tractor Owners Group has a few fully complete head assemblies to just bolt on and start the tractor. In their last two dealings, prices were great and shipping was better than finding anything...

Another reason why I snagged a Yanmar YM2610 with the PowerShift aka PowerShuttle. I had a JD850 being gear. At the end of the day the left leg was SORE from all the clutch work. The YM2610 is basically the JD850 with PowerShift. What a life saver ! I can add a loader for it. Loaders are...

Yeah, my Yanmar of the same size runs circles around a Ford 8N. The diesel has plenty of torque too. The other neighbor with the 8N and I were clearing the treed property line. Pulling out the massive diameter trees were no problem for the Yanmar. The 8N only took diameters under 10 inches...

I would agree too! Don't go to any SCUT Yanmar, Kubota, Mitsubishi, Hinomoto, Iskei, etc. Look for Ford 3000 or a Ford 8N or JD850 sized tractor frame size in any compact. This includes the rear tire sizing. Small tires limit the 3PT lift for tillers and PHD augers. This way the implements...

There are a few UTDA dealers in your GA state to offer restored and upgraded YM Yanmars with loaders. The price is very attractive and they have either a full 1 year warranty or full 6 month warranty. Many of them are in the pixs I had posted prior. http://www.fredricksimporting.com Not...

You needed to post this in the Yanmar vintage tractor thread for YM. F, FX, RS, & KE series tractors. We have a wealth of info on finding parts and manuals for you. Even the Yanmar Tractor Owners Group with over 35+ years and the largest community on the internet can help you. Link below in...

How about a 1981 Yanmar YM2610D, A 1981 YM2420D, 1983 Yanmar YM1500D, 1984 Mitsubishi MT17, 1980s MT3201 Mitsubishi, I'd say the 80s til now is a safe bet for a loader on a compact utility tractor. :)

EXACTLY. Yanmar has a few canopies that are mounted to the ROPS. They do supply official released drawings detailing how to drill and modify the ROPS for these canopies on installation. Since they certified the ROPS with the ROPS manufacture and the certification with the KY safety, this is...

Maybe the ROPS can be covered with pool noodles as a cushion. ;)

There are various clamp on brackets.

That is if you can find the the person who signed the waiver. They are a shadow buyer and resell quickly on the sly. The original owner who mod'ed the ROPS or removed them may have a signed waiver, but not from the new 3rd owner as the 2nd sly owner shadowed away. The sly shadow owner could...

You really think so of the 2nd intern owner? I know of people who just flip vehicles buying low and then posting the vehicle up for sale within hours to resell without passing anything else over but the title and keys. They don't even have their name on the title, just the original owner...

We'll nickname you the MUSHROOM MAN some time next year. LOL The wood rots and mushrooms will be populating the driveway. The rotted wood also turns into SAND. My region is all sandy soil. Every 2 years, we lay another 4-inch gravel coat on the driveway. All the neighbors do this too...

That could work in some states, not all. And if the person buying the machine is planning to do a refurb and quick resale without passing on the clauses the legal loop hole is no longer valid. Then it's 2 or more parties affected for liability.

Yes, I added one. :) And mounted it here by the fusebox. The bracket has room for 3 more switches. Thus, an LED lightbar on the ROPS could be added.

Many of the newer tractors have the tamper resistant fasteners now on the ROPs. Taking the ROPs off to sell the tractor now opens a new can of worms and greater liability as the safety system was deliberately removed.

A few people on the Yanmar listserv wanted to see how far these halogens shine at night. My drive is 550FT long. Then at the end of the drive to hwy is another farm house setting back 300FT. With the high beams, about 90% of the 550FT is fully illuminated and reflections off the other...

Yes, there are the Smartest Cog ROPs makers and then there is Custom Products certified to the standards and testing. Many of the big name brands use Custom Products to manufacture their ROPs. On the Gray Market tractor side of things, there are plenty of Smart Cogs making ROPS from Vietnam...

A Cummins would be 3X the size of his little 3 cylinder Yanmar engine in the compact John Deere.

My WB looks just like yours. Its a 1995 from Home Depot. The tub broke last year, but I plan on making a wooded deck and a wooden front stop to carry sq hay bales. Adding your clever hitch would aid using the tractor too. Sort of like this cart using the wheelbarrow parts.

Sorry to hear about a blown engine with so low of hours on it. It' a smart thing to try to reach 500 or more hours on a new machine within the first 5 years. This way, should anything falter, the powertrain warranty kicks in. Knowing Deere's use of Yanmar engines, it's always good to research...

Its turn or pull for decompression, then turn the key for thermostart and count to 20, 1000s. I use decompression in the summer, it's just a pull on my machine and crank while pushing it in. No thermostart needed then. ;)

I came across this silly redneck image today.

I really like those tiny rounds. Less waste for a small herd as easy to move around without a machine.

In WI, I've seen a not-for-hire semi rig towing a toy hauler RV about 30FT long and a flat bed trailer behind that with a small car on it. For Ag up here, they tow 4 hay wagons deep on the roads with no troubles. The wagons must have sides around them. It's odd seeing this in late August...

He's not in M!CH!GAN. ;)

It varies state-to-state for dual trailer towing. And you have it done right, the two axle trailer is first.

See figure 10-1 and on wards.

http://www.usedjapanesetractors.jp/stock-category.php?Cat=1 https://used-farm-tractor.com/products-2 www.mish-tractors.jp/product.html https://www.sankoindustries.com/tractor.html...

Not many YM machines over there anymore. Lots of KE, RS, AF and EF machines now. I did see a few Hondas. I was surprised by that. A nice KE30 or KE50 or KE60 with the 3TNE84 engine and the updated controls would be a rival to many of the new tractors today in it's class. The same engine is...

So mechanically for mounting the loaders between the two models, the same parts are used. This is a huge plus in your favor as the Koyer loader would have it's own hose and pipe routing. Looks like it's a GO to grab that loader now. :)

I was once in Nashville. Now way up north. I'm still over a 2 hour drive to the MN Fredricks dealer up here. All you got to do is look at the hood for the Fredricks UTDA s/n plate. It's special because with it it's a fully approved Yanmar Co. import and refurb in the U.S.A. and Canada. No...

We all read Japanese here. What's too hard to understand??? LOL Hint, we all use Yandex OCR. https://translate.yandex.com/ocr Take screen snap-shot of area in the manual and just paste it in the image translator. Likewise, you can take a snapshot with a camera or camera phone and put it...

As you are in North AL, is your YM2310 a UTDA Fredricks machine? Mine is.

Just look at the YM fame size between the two. Should they be the same, it's a done deal to get it. The attached is the OE Yanma loaders for the Gray Market machines. Should those fit the same machine, then the Koyer would fit too. Compliments of the Yanmar Tractor Owners Group...

Start at page 43. Compliments of the Yanmar Tractor Owners Group. main groups.io Group And Karl at Malo Tractor Your YM2310 has the UFO tied to the 3PT lift. Do you have these controls? If yes, then you can make adjustments to slow the lift down. The translation is too literal...

In the early 2000s, there was such a product. The company is no longer in business here in the USA, they are from the EU and will no longer sell to the North American market due to liability issues. It takes just one dumb-ask to get injured to drive away a great product out of the market...

The township mows highway ditches with large compact Kubotas and Deeres. All have rimguard in the wheels. Those guys are talented in knowing what to expect on steep slopes. I've mowed the front ditch a few times. It's as bad or worse than your slope. With the price of diesel now, I'm...

And this alone would make your head spin. So many differences! NPTF National Pipe Tapered Fuel NPSM National Pipe Straight Mechanical ISO International Standards Organization SAE Society of Automotive Engineers JIC Joint Industrial Council NFPA National Fluid Power Association...

The expert is 'thepumpguysc' member here. Another option is, turn the screw until you are satisfied the flow is good. ;) I take it your machine is a YM226 and not the YT226 nor the AF226/EF226 model?

Best to ask in the Yanmar YM section for your Japan tractor. https://www.tractorbynet.com/forums/yanmar or at the Yanmar Tractor Owners Group. https://yanmar-tractor-owners.groups.io

For many of the YM series, the following is very typical. As you an see, the headlamps at 25W is dismal. Thus, the halogen 35W are so much better. All of the YM Series is either equipped with a rear work light or there are holes in the rear fender for it. Mine just had the holes after...

Yes, the original starters are rated for 1.2Kw. There are 2.0Kw version in the OSGR types. Thus, my posting showing the ASAP link. :) Added: With an OSGR starter, some can have the driver motor replaced to a higher Kw type for more frantic spin as 'California' mentioned.

My bad. I read one thing and focused on another. When I had the JD850, aka YM2500 aka YM2610, all with the 3T80 engine, the starter price from Amazon was $90+core. $99 total with free shipping. This is the new generation of starters for our machines. OSGR. Way better than the old...

I bought mine this past summer from a box chain autoparts store for a mere $56 with core trade. Comes with a 1yr warranty. :) It's the 100% identical OE model. I'm very pleased. https://www.tractorbynet.com/forums/threads/not-charging.430562/page-13#post-6353408

Do a complete hydraulic drain, clean the filter (if reusable) or change the filter, flush the entire system with fresh clean diesel, and then only buy J20C to refill that meets specification, NEVER compatible with J20C ! Caterpillar TO-02 and Yanmar TF500 or TF500A are the J20C fluid too...

Oh no in a big way. NAPA and others are now in class action lawsuits due to inferior Ag hydraulic fluid. Many tractors have either failed or are broken from using the fluid. It's very possible your high pressure is from this fluid...

She looks to have caught the bass in the early morning. She didn't change out of her PJs.

LOL :LOL:

Back then whale oil or castor oil was used. Duck oil, Danish oil, linseed oil, tung oil (from nuts) were used back then too. Those are the pre-polyurethanes from long ago. Asbestos shingles do exist too. https://www.roofingexperts.com/asbestos-shingles

If you live in the north, I would highly recommend locating yard tree leaves of oak and maples to cover them before the snows arrive. It's the only way we can grow 2 year garlic up here.

When I lived down south where the roads are glass smooth, no pot holes nor frost heaves, I would drive till the tires got to the steel belts. We just called them slickies in dat dar south. Nor stinkin inspection do dar netiher. Well, I'm up north due to post covid job finding. So the days...

If you know the condition of the swapping engine, it could be a win or a loose situation. Swapping does have the benefit of less down time and a faster up and running machine. There were very minor differences of the Yanmar 3T80U vs. the 3T80UJ. IF in a pinch, you could swap the Yanmar 3T80U...

16 = 194447-13810-X 16-1 = 194447-13811-X 16-2 = 194447-13812-X According to the TOAD, 194447-13811-X is replaced by the 194447-13812-X. https://shop.toadmarinesupply.com/ships_store/?p=numberresults&pn=194447-13811-X YANMAR YM186 PARTS MANUAL 0CT10-G22801.pdf Original publication. It...

Buy a simple zerk fitting kit from Harbor Freight. Tap a hole near the top of the cylinder. Install the zerk fitting. Now you can grease it up anytime you need to. :) In a quick fix, you can spray PB Blaster with the stick wand into the near circle gap of the crank and the tube cover. PB...

When you say new fluids, what fluid did you use?

Winston, recently you posting something in another forum about the vent-hook. If it's clogged by mud-dobbers or an insect cocoon, would this aid in having the pressure raise? I'm just guessing some on this.

The engine is the Yanmar 3TNA68. Why is it great to have this engine? It's found in many John Deere Gators and Deere industrial excavators. It's in the Deere F915 fairway mowers too. It's in the Komatsu excavators. Yanmar has it in, C25W, C30R, C37R, YFW30D, and the very popular KE3...

This is the original, next is translated via Yandex OCR

And if you need new tracks WBF has them too. http://wbfparts.com/pdf/rubbertracks.pdf

I believe the Yanmar Tractor Owners Group has the manuals for FREE. And or the guys in the Yanmar section do too. The machines use the SAME engines. :)

Best to ask in the Yanmar section. Japan tractor questions as best asked over there.

It's happened to me on a few other occasions. It's not a network nor human error nor glitch either. mods behind the scenes can wipe with no traces threads with no replies.

Best to ask in the Yanmar section. ;) Japan tractors have Japan made parts.

Around the 3X T-posts, 48-inch high welded wire fence wrapped and tied with zip-ties works. We've done this for years. Deer will both rub and eat the bark or the wood destroying your trees.

Yes, 5qts engine and a little more for the filter. ;) The machine has the same hydraulic capacity as my YM2610 with the 3T80. It will be 19 to 21 quarts to change out with J20C Hy-Gard or TF500A. Both work.

I've not added this yet to the Yanmar Model Cover Pages. Here is the Parts Manual for the YMG machines attached PDF. :) Page 5 tells you how much oil the engine takes. 4.5L (5-qts) Compliments of the Yanmar Tractor Owners Group on GroupsIO. This is the English summary of a 3T80 engine...

A YMG2000 is a far better machine over the YM2000. I hope his machine is the G with the more modern setup.

The Yanmar headlamp assembly is 194145-53200 (Stanley 001-1259). For those with a Deere 50 Series, p/n HL5414.

About 1/2 way thru the YT vid, you can see how the starter is mounted. This engine is running while off of the machine. ;)

Did you hunt YT for vids? :) With the Yanmar engine, it should be simple enough. Disconnect the battery. Bolts and hardware are all metric.

It's an OE parts manual made by Yanmar back in the day. Some of these Parts Manuals did come with one or two specification pages. Many come with the wire schematics. Note, the specifications are to JIS and not SAE. So, what is rated for JIS Hp of the machine would be higher in SAE Hp...

The manuals are located in the link below in my signature. These are at the Yanmar Tractors Owner Group. As you mentioned winter, be sure to download the Engine Block Heater do too. How is the Thermostart on the machine?

My goal was to keep the OE look to the YM machine. I've seen the LED headlamps and it took away the natural era look. Yet, finding the P15D-25 bulbs at a good price is a pain. And typically what you do find is the 25W/25W vs the OE 25W/35W (low/high beam). After consulting a few vehicle...

Did you download the Parts Manual for FREE? It would tell you what parts are in the area and involved.

Jon, Take good read at the attached.

Spray-On 711 fluid film works great too. Price is less than $5 per can. https://glaserceramics.com/index.php?route=product/product&product_id=19110 Both cans are the same formula. They are switching over. Sprayon #711 is an ultra-thin, transparent blend of high-quality petroleum...

Fredricks Equipment has them 'new'. Tank, thermostart – HT-4460 Part Number: 124460-77802 Tank, thermostart - HT-4460 - Fredricks Equipment Parts Wow, they sure jumped up in price. And it's used on all the John Deere compacts too. There are 2 types of these thermostart tanks. The link is...

Ford calls it a Thermo-start air-intake heater or manifold heater. I bought mine thru AI products (aka John Deere owned aftermarket co.) here: https://www.amazon.com/AI-Products-C5NE9A436A-Thermostart-Manifold/dp/B06X9ZP9KD It's listed on Amazon for $15 thru others now...

About $9 on Amazon if ordering the Ford 1000 Series tractor types. It's the same product. We pay a tad bit more for the Yanmar name, even in the aftermarket circles. I've already replaced mine last year with the Ford identical version.

That's not enough to grow. Take 40X that crop. The clove ball needs to be the size of a baseball. Thai garlic with the purple streaks has a nice heat and flavor.

The good thing is, your hydraulic problems are solved. :) Glad Winston was here to help you out. Our machines are Yanmars, typically not the norm for how other brands are done. Glad the o-rings were the easy fix vs. a complete hydraulic overhaul running into a high price of repairs.

Does it need a hydraulic lift or can the sweeper use an electric liner actuator lift? The YM14 no hydraulics was upgraded to a YM146 with hydraulics later on. The USA models also had the 3PT and Ag tires as the EU machines had no 3PT and turf tires. Very odd. Here are the general...

OUCH. It's not the battery size I would be worried about, these old tractors use the Datsun (Nissan) 35A 1970s era alternators. Some of the aftermarkets are 45A and a GM type with small modifications is a 60A type. I would stick to a Thermo-start. For the 2 or 3 tablespoons of diesel...

That would work. It's the housing holding the Yanmar or Deere heater from the air intake to the air intake manifold. I bet it' an aftermarket one. Still good to have.

Jon, Yanmar and Deere did do an all electric air heater for the newer models we see today, but not like the amazon products you have shown. See the link. It's in many Yanmar and Deere machines. https://www.heavydutykits.com/product/tre502668-air-heater-john-deere-4-5t/ This tech is not...

You got my vote on this one for sure. I'm Dark Mode on every forum except here!

My local Blain's Farm and Fleet, but it's seasonal. At the end of September, they go on sale for about 10% off and then put away till Springtime. Wally world has them, but you need to watch like Amazon, is it backed by the site or 3rd party. hmmm Now, both Wise and the other brand sell the...

Sometimes the rut is so intense and continuous with minor pitting a wire wheel brush on a drill would greatly help and reduce the time. A set of 4 or 5 wheels with coupon from Harbor Freight puts the cost at a mere $4. Hard to beat the price for the simple effort of getting a job nicely done...

Ah, you seen the manual and the schematics for this model. Yes, it's a bit overwhelming and 2 pages!

I'm up here on the WI state line with my Fredricks restored YM2610. Yes, Tom Frederick really gave me strong confidence of buying a UTDA machine. I watched the entire restore of several machines in their progression bays. Hats off to those guru guys doing the grunt work there to make these...

Keep the TSC receipt and warranty sheet/card for the seat. These days, seat manufactures no longer use UV formulas to have the seat last 20+ years. You would be very lucky to get 5 years. The only seats on the market with UV rated protection are the Marine seats made by Wise. These match...

With coupon for Harbor Freight, they have a large container box with close-able lid full of various springs. I've used a few already on mowers and throttle cables. The entire kit was less than $9 after the coupon. None ever rust either.

I know I've made some lengthy Yanmar titles. :) Post back a link to your new thread here please.

Joe, If you had a choice of picking one, the YM1720 is the best overall deal with it's options. Many came with OE factory power steering and PowerShift. The 3T75 engine family is in the domestic imported YM220, YM226, YM250. It's in the genset LE family too. Oddly, no YM1710. Yet the...

Do it manually. EDIT posting select all hit delete keyboard key press ALT-255 spacebar ALT-255 spacebar then save. Nothing will show up in the posting. It will look blank.

Nope, the SA221 nor CT1021 can not do hay to bale nor move the rolls. For 1 both are SCUT machines too close to the ground. 2, both have minimal 3PT limited travel for a rear fork and the loader rating with a front fork is scary moving round bales comfortably. Is there a Rural King out your...

I had bought Deere Hy-Gard J20C in 2019 for a mere $19 for 2 gallons. Had a leaking hose, more than half dumped out. Got to Farm & Fleet and the price was $39 for the 2 gallons. I priced around the area and the Farm & Fleet was showing the best price. Still shaking my head on this.

Oh, if I recall right, the MT372 was once a SATOH model, just rebadged. So there are options out there.

Your MT372 is 2WD then. The 4WD has 5-bolt pattern. As a 2WD machine, Front: 4.00-8. It's very common for lawn tractors and small trailers. You should be able to score rims in that size all day long in both 3 and 4 lug patterns. The center hub area is the only standing issue, yet a good...

Tractor with pallet forks. :)

:ROFLMAO: Reality. But we could hope. You can't base it on raw steel costs. Fabrication of panels and supports with labor shortages is the new norm. Places are paying over $25/hr and still can't get people out to work those jobs. That's about $50K per year plus OT.

Oh, I spy with my eye a bit of Deere on the front bar. :D

:love:

Here's all the manuals without all those water-marks. :) The repair manual of 348 pages is too big to add here.

There is a purposed thread for your Yanmar engine located here. It's rather extensive. On several pages, one can even find the manuals posted. https://www.tractorbynet.com/forums/threads/forum-for-air-cooled-diesel-engines-and-clones.206305/page-60#post-6315717 Seafoam is a great product to...

There are scammers loaded on FB Market place too. Or the price swap-a-roo on FB Market place. Where it's bided up and up and up. CL is easy to spot a scammer and report. They lowball very badly and 99% of the time only post 1 pix.

The YM155(D) is a true SCUT. With this said, a normal 3PT auger PHD sized attachment will fail to work properly with your machine. The YM155(D) machine needs a true SCUT 3PT auger PHD to properly work well for your machine. Recently, we learned this with a member having a Yanmar SA424 SCUT...

Yes. And at one time I tried to keep things up with it for the Yanmar machines. Then gave up as I became the 3rd owner of the Yanmar Tractor Owners Group to maintain. https://www.tractorbynet.com/guide/Yanmar/YM2610.html

The manuals are for FREE over at the TractorForum.com site. Member BubbaGoat posted dozens of them there.

If you come to a fork in the road take it. ;)

I wonder if it's in this manual too. I have the YFL155 & YFL1075 manuals.

After spending millions of dollars in signs and flashing lights, DelDOT is using “clanker balls” as their newest solution to prevent large vehicles from getting stuck under a railroad bridge on Casho Mill Road . NBC10’s Tim Furlong has more on what this solution aims to accomplish. 'Clanker...

Its a Yanmar kit tractor sent to Deere to assemble in their GA facility. IF you can not find parts, please reach out to the Yanmar Tractor Owners Group as we have been helping Deere owners for the 50, 55, 70 and 90 Series machines now since the 2020 parts shortages hit. Deere has dropped all...

Excellent post. One great way not becoming a victim is to look as if you are so poor like dirt. Oddly, thieves will steal just about anything and some even leave behind crap like old tires behind tossed in your yard, ditch or amongst the trees nearby.

Yes, you can have your layers with the blankets pulled over the eyes. It suits you too.

You can get a solar credit too for the gate per this gate manufactures website. https://www.usautomatic.com/

EXACTLY. Even the Gray Market Mitsubishi machines are well sought after too.

BTW, on the Yanmar Tractors Owners Group, the free manuals are there to know what CAT type, 0 or 1 is used. Link below in my signature.

Details on the the little YM165. Should answer most of your questions. :) https://www.tractordata.com/farm-tractors/002/3/9/2394-yanmar-ym165.html

Best to ask in the Yanmar section. :) We know these machines inside and out.

A bit of PVC pipe, elbows, PVC red-glue makes the frame. I've seen both the golf cart canopies and the dumpster lids. The Golf Cart Canopies are just as pricey as the ones for compact tractors. $300 to $650. The dumpster lids (new) are about $28 to $100. And best of all, these have hinges...

Exactly. You missed it. Mainly, whats the use of a gate like that.

This fuel injector pump system is way to modern in this section. Pop up one level and then enter the Yanmar (NEW) and post over there. I bet several have been in this fuel injector pump system before in the other section here on TBN.

Do you know the simplest way to keep those people away? Within their circle they practice SHUNNING. Just say you are a former JW and you want to show them the way out of it. They will turn high tail and NEVER RETURN ! Even if you invite them over, they will not come.

So a forked carry-all on my 3PT can pick them up and haul them away with ease. I deal with round hay bales weighing much more.

Here's my $5 Golf Umbrella. :) The handle fits within the existing bungee cord on the ROPS. It was a 92F+ day as you can see the reflection on the top of the umbrella.

I use a Golf Umbrella. Priced right and just add a side pipe to the ROPS. I can put it up or down in seconds. :) And these things are HUGE for sun protection. Some people use them for other things. Just picture this on your ROPS and how much coverage you will be getting. Stay nice and...

So basically, no difference than DirectTV for reception/transmit in heavy clods with water or a drizzle or a storm.

As CW McCall sang in CONVOY, I crashed that gate doing 98, let them truckers roll 10-4. This gate would be more like, I can crash that gate doing 9mph with the tractor with a loader bending those arms into a pretzel. The linear actuator would snap the ball screw into several pieces too. And...

Bummer it's the dumb single relay control. I wonder if keeping the key pushed in allows you to use the tractor for long periods of time that way. I can my area temps as low as -22F. An air grid heater would be a great help for moving snow. The 2 relay control with the air temp sensor will...

The JD423 dozer blade requires SVC hydraulics. IF there are enough ports on the SCV block to add the belly mower height controls, then the only question is the longer dozer blade mounting pivot arm that runs to the mid-section of the JD850. My Yanmar YM2610 is a JD850, yet it has the...

The technology has been around for the past 30 years. Both Yanmar and Deere put plenty of engineering and testing behind it. It's an advancement over the prior Thermostart from the 70s and 80s era. Plus, the heater grid is all electric, saves on fuel use and no added emissions. It should...

Click bait video. #1 should be, because they are now owned by Mitsubishi. And the Mitsubishi CEO is now over all of the two combined companies. And now the latest Mahindra tractors are powered by Mitsubishi engines since 2012 with 70 years of engine technology.

Check the o-ring at the fuel filter bowl. And if the fuel filter bowl is plastic, it may need to be replaced. Over time these plastic parts will weep in air due to the fuel pump suction. Typical on many of the Japan made machines sold over here.

I use the shop-vac both ways. First as a blower and place the hose into the filter to blow it all outwards. Then as suction for the outside with the bear-claw attachment. It's in the 30psi range so as not to rip the filter media.

Your tractor is Japanese made by Shibarura for Ford. It uses the standard tractor and off-road air filters found in Japan. These filters are used on Yanmars (Deere), Mitsubishi (IH CNH), Iseki, Shibarura (Ford), Hinomoto, Kubota, and the like. The key is knowing the length and diameter since...

Ron, not enough info. Are these already under ground and buried? Are these above ground and running thru walls? Are the 90 degree bends with access plates? Is this electrical PVC or conduit metal pipe? What codes are applicable for your location? What grade of wires are used to...

Is the 1920 2WD or 4WD? Your Ford is a 1000 series machine made by Shibraura. You'll need to ensure the rims would be a fit up. The eBay listing says Ford 2000 and higher. Its questionable if these would work without more info.

On a side topic, if you ever boil water for gluten free noodles, do the same thing, add baking soda. :)

And before the tractor, they had other machines too.

There are about 3 main wheel spacer companies for off-road and Ag. Since covid 2020, they are 24 months behind in orders. I know of several people who made their own. In doing so, the material to use is Aluminum 6160-T5 or 6160-T6. T5 is typically cheaper, and because the hardness is close...

Yanmar 1912. ;)

If you opened the lawsuit link, there is a bit of info saying of our grandparents and parents who had less concentrations in their bodies compared to each and every generation following. Additionally, the children as offspring were at a disadvantage as these chemicals weakened their DNA from...

Keep with the J20C hydraulic fluid. Both Deere and Yanmar worked extensively on this fluid. Yanmar calls it TF500A. IF the old fluid has a nasty smell, then it's time to change it out along with cleaning the re-usable filter with diesel and a soft toothbrush. My machine is built on the...

https://www.rosenfeldinjurylawyers.com/news/roundup-lawsuit-settlement/ More than 9,300 people have filed glyphosate cancer lawsuits against Monsanto Co., alleging that exposure to Roundup herbicide caused them or their loved ones to develop non-Hodgkin lymphoma cancer. These settlements would...

And it will not end there either. https://www.theepochtimes.com/study-shows-toxic-weed-killer-found-in-1-out-of-3-americans_4691347.html This has been around since the 1940s, about 80 years. Now with studies over the past few decades, it's understood how bad this stuff really is. Since...

If you have a 24VDC or 48VDC scooter motor IP68 type, your windmill hobby can generate power. Snag a Renology charge controller and enjoy.

BAKING SODA Add baking soda to the water for making hard boiled eggs. It changes the pH levels to make the shells come off perfect each and every time. For those 15 eggs in a pot, 1 teaspoon would work well. No need to wait weeks. This works on freshly laid eggs that are 2-days or older.

I really like the white one. Make it my daily driver. No road plates, no emission testing, no registration. LOL It's a classic! Just need to be creative for a nice retro cab to match the design cues.

It was pluG-n-play, nothing to swap nor move around. A perfect fit for mounting, pulley and all wire connections. I took the old Hitachi unit in as a $15 core. Everything matched 100%.

So you can be going 10mph forward and then slam it to reverse? ? ? OUCH.

:oops::cry: ouch. So rather than the old style for under $10, you got to pay big bucks.

My machine uses the 4 wire setup. 2 wires on the female Delphi connector spade terminals and then 2 eyelet wires that are tightened down. Mitsubishi makes more than just one type of alternator. You'll need to find what type works for your machine. ;)

Best to post in the Mitsubishi Satoh sub section. :)

Depending on the polyU clear coat, some are not UV resistance and will turn to a yellow haze over the color of the paint looking like oil or staining was smeared on the machine. You would need a ployU UV resistant paint typically an automotive grade. Rustoleum has such a clear coat in the...

If your recall vehicles made prior to 1986, the flasher=relay is a metal round can under the dash. After 1986 till early 2000, it was a metal narrow rectangle box in the fuse relay box. Bet your machine uses one of those too. Today, vehicles just use the block block 3 leg Omron rely...

So it does work like the original YM series then. That is super. Long as the machine stays in the selected range, there are forward shuttle gears, neutral, and reverse all without using the clutch. This makes for a 'live' PTO in the elected range too. With the original YM series, if the...

It looks so well done, you would never of known it was a reverser to begin with.

Sadly, Deere isn't supporting much for the 50, 55, 70 or 90 series tractors since the supply chain is crippled. Yanmar has made compact tractors for Deere for the past 45+ years. Yanmar made these 70 & 90 machines as kit tractors. That is, engine frame and axles came into the Deere factory...

Are you saying the new YM Series has no neural to shuttle into?

Since this thread is just titled manuals, it's robust enough to just keep adding info to it. :) My post last year in 2021 triggered this off. ;)

We have a 3rd party OPS manual for the F235. It would be without the PowerShift as the F is the geared version. Very close. Your machine uses the same engine. 3TNB84-RB It can be found in this manual on the link provided above. YANMAR 3TNB84 F265D 0CT10-M24500_en.pdf For Gray Market...

Thanks. I've not hooked up power yet, so a fuse, switch and a small resistor could do the job keeping the halogen from blowing. Did you take yours apart and see if the bulb is replaceable or if you can just wire in LEDs inside? I have a few 35W 12VDC LEDs made by LE lighting corp. The...

I just changed the alternator this weekend. The OE original lasted 41 years. Guess what brand fits. I have Mitsubishi on my Yanmar now. :)

Picked up the autostore alternator for the 1973 Datsun 1200 1.2L turbo. Err ah, my Yanmar tractor. :) That Altima actually is the Mitsubishi 35A brand. Fits and works great! And the new VR-550 in solid state is now in there too!