Search results

Chewy thanks for the manual absolutely will help , if when figure what parts. Thank you

Anyone have idea why it lost spring to return to center. That cap doesn't seem to me to have any matter on it

The pic with 3 and silver block underneath floor of f/r pedal 1 circled goes back of tractor other 2 go forward to either loader or 3rd function will have to check tomorrow. Other pic is loader joystick block 1 circled is the 2nd line going to back of tractor. Will basic owners manual...

So where to start I have a ansung bk976 backhoe frame mount qa for Kubota L2501. We keep having issues with the cap on the bottom of hydraulic control breaking. First time blew oil everywhere. This time cap broke exact same way snaps the ears where screws are but no real oil Leak, and able to...

Appreciate everyone's input, I was skeptical it would do it, good idea if I keep it I'll have to make work for the 3pt like stated . Thanks again fellas

I have a L2501 with a 3rd function, would anyone know roughly the gpm of the 3rd function? I assume there's a little difference in what fitting are on it, but looking for ballpark. One reason along with others, I'm curious is , do you think it would run a sweeper broom?

Thanks dickhob, more great ideas for me to work with, esp being new tractor trying to utilize and factory hole or bolt I can. all of these will help me and esp my dad,

Great ideas thanks again guys we can't wait to get using tractor. Still want to build skid plate for hyd filter. That looks like a mess to design

L2501 Anyone make something vertical to help you get on tractor, thought I've seen something poat d like this before, don't know what you would call it grab bar, handrail? Anyway was thinking somehow maybe mount it where loader attaches. Any thoughts

I seen a pic in here with the steel lines in the Kubota kit, now I wasted two hrs looking again and cannot find to show dad wth. Another question wicked grapple from ea or dealer sells terra force ycg060 Guessing it really don't matter all gonna be real close

Thanks for the thoughts and info guys, not sure which way we are going with the b.h , there's a couple family members involved as we all will be using like are old tractor

No both the backhoes bh77 and Ansung are subframe mounted we have a b7800 with the three point now and won't do that again

I think we are about to close the deal on a L2501 with a likely Ansung backhoe this week ( most reviews seem good for bh and save 2k over bh77 idk) and want a 3rd function haven't been keeping up here in a long time, it used to be aftermarket was better than Kubota. Now It seems 50/50 for...

I know this is vague and prob won't help me but few years back I've seen different mods for diy chain storage boxes on say all the newer Kubota L series, was thinking was in front by step looked factory/ nice. Also seen stuff for shovels, of course chain saws which I've found alot of those but...

anyone know what the gearcase is made out of? wondered if it was aluminum or a cast aluminum or such. i have a b7800 think i have a tiny crack started

talked to the owner of a kioti dealer other day which i happen to know(just came about wasnt in market for one), anyway he states that kubota is one of the lowest rated tractors out there as far as specs. says kioti has way higher lift capacties front and back and alot more flow as far as the...

i guess im still not sure if i should get 1 or 2 rear remotes! can you do anything with 1? or best to get 2 at this moment i dont have a use for them, but someday hope to gain attachments. also im still confused would it be a good idea if i got 2 remotes to get both float? not sure about if i...

looking at trading in the b7800 with backhoe for a new L2501 on kubotas site it has the build your own and i would like to add rear remote for just in case but i need help with the options im not really sure what i want or what these options mean.here is the first options you pick one of these x...

anyone know of a site that could help me with a injection pump for an allis chalmers 5020, i see there is not an allis forum here. or here is my problem i am getting to much fuel into motor, i do not know if there is an adjustment on the fuel pump there is probably only one screw set that it...

would like to consider getting a tig welder in future cant aford the best so i think maybe it narrowed down to a couple brands. want ability to do alum. which i would need ac/dc right which i think prices start around 800.00 would you buy a alpha tig200? or a everlast powertig 185dv? and why...

any info yet in the pipeline about 2017 changes for b or L series tractors? or when the new model year comes out not familar with it on tractors is it early like autos? looking at a new one possibly and would hate to have something good change on them.

my front end loader is acting funny a little jerky and or no down pressure (as in dont want to lift front tires off ground) any ideas to look at or is my control valve gone?

best dealers on here not just price but easy to deal with, and know what they are doing, i am willing to travel a good distance if needed from michigan. i know i've read it before about warranty and loyalty, but my local dealer has NO loyalty with me so forget them if they are not in the ball...

looks like the b3200 or b3300 replaces it, but WHAT is the next bigger(size) replacement from the b7800 still in a b series. also i would like a backhoe as i have one now what model would that be? i see people recommend the ATI ssqa attachment , is that still the way to go? because you are...

What would be a good replacement for the b7800, i dont really keep up with these things i got a b7800 with a la402 loader , and a 3pt backhoe attachment. i see the b3300su is nice but people say its just a low price model to compete with others. also i see the b3400? seems to be close what is...

i was wondering what was a decent price to expect to pay for a new backhoe attach Bh77. i have backhoe on my b7800 but not sure which model it is. possibly looking at different tractor with same setup i have>