Search results

I really like my Seppi sml 200 orchard y flail. does an excellent job on grass, brush smaller than 1.5 inches dia. with 36 D's with 2 flails each that's 78 tempered flail knives making a fine mulch. I prefer to use a lawn mower on my lawn since in the PNW if the ground is wet the tarctor...

Thanks again for your help

I bought a Seppi m sml 200 in 1998 for occasional use with Y flails and it does an excellent job on grass , blackberry vines (generally if I can drive over it it's muulch) and 1" limbs ( I've abused it running over larger diameters and it just keeps going after replacing lost side slicers)...

Buy the pro saw. My 038 mag ll quit and I got a 500 I, the o21,023 got tired so got a 261c. and I got an antique Husky compact 023. As soon as I wear out the 0.325 bar on the 261 I'll change to a shorter bar 3/8 pitch/ sprocket. The pro saws not only last longer their weight to power...

If memory serves me you need a troque multiplier to remove the blade bolts. I haven't sharpened my very abused 430. I just use the seppi flail as long as there's nothing really large in the brush

Help please TO 35 air cleaner problem I'm working on a 1958 TO 35 Diesel, Standard 23c , Wagner FEL. I'm trying to get a working tractor. Trying to locate a 11 inch tall oil bath air cleaner or ideas to retrofit/ replace it . Original cup rusted out. I could rebuild the filter media but...

Started out with a 1968 mf 135 with FEL used,. got tired of fixing and got 1999 jd 4600 with FEL ( kept MF because I can always use it to pull out the tractor from our wet ground)), With this level 43 hp you can run a chipper (started with bearcat pto 70554 5" then got a woodmax 9900 big...

Finally started tearing into the steering. The problem was broken power steering piston rod. this explains why it would turn rt but not lft

Biggest thing you should know is unless you're going to have someone deliver or know someone with a truck tank our state laws in WA.(maybe in OR) limit you to 6 gallon containers...So I have to fill 2-3 5 galllon diesel tanks at Costco ( cheapest top- tier fuel in my area) and dump them into my...

Hi folks 1968 mf 135 deluxe with cont engine. steering problem Moved it this afternoon to hook up the wood chipper. Turning right it turns almost normal then seems to move faster like power steering hydraulic is working... try to turn left and it's almost impossible to force the steering wheel...

I have a 1968 mf135 deluxe gas 6 speed that if I put it in neutral while the tractor is still moving will lock up the gear train. I've fixed it by opening the transmission oil filler plug and using a bar I can move the gear free. I make a habit of not moving the gear selector to neutral...

Replacing worn out tines. Does anyone have a recommendation for tiller blades? OEM or after market? Cheap parts usually imply poor quality resulting in poor value for the money spent.

I have a leak from the seal between the front axle housing and the knuckle on a 1999 mfwd 4600. Anyone replaced this seal? Looking at the Deere technical manual instructions it appears it's a major overhaul. I'll probably keep topping it off until the winter because I've heard stories of...

Looking at the mx9900 anyone used this pto machine? Have used a bearcat 70554 since 1994 and after finally breaking the drum weld when as knife came loose (second time) its ready for the scrap pile. I like the replaceable anvil and the power requirement since I have 34 pto hp. The bearcat...