Search results

When you put the shear bolt in, put some grease on the spline, looks kinda dry.

Was that just overspray on his dog?

You’ll definitely know if it’s too wet. Trust me.

i did this to my BB so I could move small trailers & wood splitter around my place. Probably way overkill, but I like to weld.

I purchased this at my local Wilco Farm store on sale, 3 months ago. I‘ve had to remove quite a lot of alder, they were getting dangerous, & falling over the fences In storms. I’ve split 10 cord with it so far, will cut another 6 next spring. i’ve been very pleased with it so far, & will get...

Coldwater Tractor in Hoquiam Wa will have one. look up their website or ph#3605332160 just a thought, as I don’t know any more.

Fishplate on outside is 1/4”. Although it probably didn’t need it, I thought it looked good. Inside is just welded. I purchased the receiver tube at harbor freight.

This is what I did when I bought it. If anything it made it stronger. iIt’s very handy.

2 things I’ve been gonna install on my B7500 For years. A parking brake indicator (which I still haven’t done), it’s a wonder the brakes still work good as many times as i’’ve forgotten. The Echo back-up alarm switch is for that. The other is an old Caterpillar battery disconnect I located...

Well, my landpride 1542 was purchased new 20 odd yrs ago with my Kubota B7500. 42” not 48”, but I suspect quite similar. i’ve had it in some pretty tall serious brush & saplings that hadn’t been cut for about 25 yrs. I change the oil every year, it even still looks good. although quite...

My old U.S. Forest Service Dodge is kind of an end of an era. I think the USFS fire trucks are still green. All other vehicles have been white for some time. Do pickups still have a 4spd. option or manual shift into 2 or 4wd/hi-low range? Not to mention locking hubs on front axles? Most folks...

I think oosik is right. If you unscrew that center nut it may have a dipstick on it. The photo on right is the fill plug (with a breather hole & dipstick) on my Agric tiller. If yours has no dipstick or level plug hole, use a wire or some such, fill 3“ to 3-1/2” above bottom. My old Land Pride...

Arto thanks for the reply, your posts & pics were a wealth of knowledge. Basically your S&R does look like a dead ringer for the Machete. I have a couple questions, I hope you won’t mind if I PM you. I promise not to be a pest :) I used to be a member here but haven’t posted for so long I had...

Well, it’s been about 1yr since the last post. And 13yrs since the first? I bought a Machete chipper today for $150. looks like it’s not been used much. But been sitting for many years. i like fixing old attachments & i can really use a 3pt chipper. I’m a machinist & welder, so that might help...