Search results

That makes sense. So body may be right, but nothing inside? I assumed they must be China junk at that price point. I emailed you last week about my injector pump and injectors. I'm going to need to find a fourth injector before I send everything off. If you're rebuilding anyway, can I buy a...

I've seen a lot of aftermarket CAV injectors for cheap while looking for a replacement injector for my MF50E. I'm wondering how good these can be at around 60 bucks each. Anybody have any first hands knowledge about them? I was planning to have mine rebuilt, but one of them came out in pieces...

Thanks for the link, but wow is that an expensive pin. I may have to just build one, unless I can find a used one.

I tried tractor supply, but they don't have anything big enough. It looks to be 1.5" diameter and 4.5-5" long. I tried searching everywhere, even by part number, but no luck. Also need the rubber boot for the later control lever. No luck there either. Newer machines don't have this same style...

Thanks for the info, I guess the main thing is that there is enough rollback without too much.

Has anyone bought seals from All States? They are priced very competitive. Not sure if they are any good though.

Did you install an adapter on your machine or did it come with the global attach? I'd be curious to know the tractor pin centers to global rod centers distance.

Here's a picture of the iso standard for global attach buckets. I looked up pallet forks and they all seem to be straight up. I guess with the adapter on loader angled forward with bucket indicator at level, you would lose some tilt back with forks or any other straight up and down...

I found another photo of a bucket. Looks like 25 degrees, roughly.

I just bought a euro adapter to install on my 580C, but it needs pin brackets for my loader welded on. Does anyone have a global/euro setup on a loader that can give me some info about position of the system? I'm trying to figure out angle of adapter when loader is set to level bucket and...

I bought an HLA adapter, but I had to get one without the 580C pin mount to get it this year. Anyone have a euro quick change on the their Case? I need to figure out the angle of the adapter when the loader is set to level bucket. From what I have found online, the euro pins should be 10...

Makes sense about the set screw in the gland nut, since the old hole probably won't line up after torquing gland nut. Great idea about the caps while hoses are off. Any idea what size the hydraulic hose fittings are? Are there different sizes for the hoses?

LMAO! Nothing makes my day like monkeys dressing like people. People dressing like monkeys is a close second. 🍌

Looks like my 580C has the shorts pins and bushings for swing to boom tower. They are also worn out, so looks like I'll have to retrofit the long pin. Which is a bummer because those hoses are in pretty good shape still. I wonder if there are any aftermarket short pins anywhere. Good news is...

Wow guys, some great advice here. I'm going to order those seal tools. Getting those seals in looked like a hassle. I'm going out to check the boom pin. I think it is the double style. That will save me buying the wrong hose length. So glad I came here before ordering seals. Would have never...

Hi Guys, My Case 580C backhoe/loader, just blew a swing seal. It's finally time to start replacing seals and hoses before anything else goes. Is there a recommended seal brand or place to buy that's a good deal? I see the seal kits on Amazon, but not sure about the quality or price. Does...

Thanks for the info. The HLA adapter looks nice. They do make brackets for the 580, but delivery is half a year 😲 I may just have to buy some over bucket forks. I don't like them, but they are cheap and available. The euro/global adapter would be much more functional, if I could find one.

Hi everyone, I thought this might get more info in this forum. I'm looking to convert my old 580C to the global style quick attach. Can't find any adapters for it. Maybe someone makes a universal FEL adapter that I can make work. Does anyone know of an adapter that will fit? I know some will...

Should I post this question in the attachments forum?

Hi everyone, I'm looking to convert my old 580C to the global style quick attach. Can't find any adapters for it. Maybe someone makes a universal FEL adapter that I can make work. Does anyone know of an adapter that will fit? I know some will say I should just go ssqa, but I prefer the global...

I have been trying to research my MF for awhile to figure out the year and haven't had much luck. I was thinking there should be some system to MF serials like other manufacturers have, but can't find any solid info on decoding. Then there is the illusive "MS No", can't find any reference to it...

Hi everyone, I bought an old MF 50E Power Shuttle and I am trying to figure out what year it is. I'm also not sure what manual I need to get. It has a Perkins four cylinder. I think it is late 80s early 90s. MS number is 5103 and serial is X0049 if that helps. It needs some maintenance...