Search results

Good Morning. my question is can I use an Eaton 5gpm 30920 valve with my tractor for the rear remotes, i have to admit I am a little confused with the gpm numbers, according to JJ my tractor hydraulic numbers are Mahindra 2810hst Hydraulics: Type: open center Gear Pump flow: 5.88 gpm [22.3...

I have two hoses that run from front of my tractor to the back, when the backhoe is not on the tractor they are coupled together so that power goes to the 3pt. when the backhoe is attached the hoses are coupled to the hoe, the 3 point hitch still works which is downstream of the hoe, most valves...

Has anyone used/installed one of these valves, I need to replace my loader valve and saw this on surplus center website. I would like to add a 3rd function for a snowplow this winter was going to use electric solenoid valve but this looks a whole lot easier. 3 SPOOL 25 GPM JOYSTICK LOADER VALVE...

I have a snow plow that i use to use on my skidsteer, a cobbled together 7 foot fisher on a universal skid mount. I want to use it on my tractor this year but I do not have a third function on my loader to adjust the blade. The loader has a nimbco valve with power beyond that goes to a hose...

I have a 2810hst with about 450 hours. Hydraulic fluid is leaking out the reliefe valve located under the seat on the 3 point arms cover plate. It is a fitting that has a small bolt with a hole drilled though it. The leak seams to be coming from the threads of the fitting not the relief screw...

I have a mahindra 2810hst with a daedong engine, when mowing and going up hill the engine starts to bog out, any ideas on squeezing out a few more hp out of this particular engine. It has been a good dependable tractor and is 6 years old and out of warranty. The only beef is that it is under...

can someone please tell me where the main system relief valve on a 2810hst, i have a service manual but as with most import manuals much is lost in the translation. It seems to be telling me that it is in the pto solenoid which does not make a lot of sense. thanks Glenn

can someone please tell me the location of the main system relief valve on a 2810hst, i have a service manual but as with most imports much is lost in translation. thanks Glenn

where is the proper location to install a pressure gauge to check the relief setting on a loader valve. 1. power beyond port 2. return to tank port or 3. inlet from pump. thanks glenn

good morning, now that the warranty has expired is there any way to boost the horsepower and front end loader capacity on a 2810hst. the engine bogs down going up hills even in low and the lift capacity on the loader seems very low for the size and weight of this tractor. thanks glenn

Any recommendations for a good sealer to use to help protect concrete from the effects of road salt. thanks, Glenn.

its that time again and it looks like it is going to be a big acorn year, it has been a little light here in new england the last few years. does any own or have used a a bag a nut machine, they look cool and like they should work good. I have tried everything, raking, sweeping and blowing there...

I have to dig a bunch of post holes around my property, some are on hilly and hard to access spots which would require going across the lawn. In the past it was either by hand or with a skid steer monted one, a tractor one would not work either in this application. Has anyone use a toro dingo or...

I am looking into a rotary cutter to use a couple of times a year to cut about 2 acres of forest underbrush, plenty of rocks out there. which is a better choice, slip clutch or shear bolt. I am more worried about the tractor (hst tranny) than the cutter. Any recomendations for cutters for this...

Has anyone modified the feed system on the jinma chipper to better feed small, green stuff. The chipper works great on drier larger limbs but does not feed the smaller stuff well. I was thinking to either add more aggressive paddles to the drum or decrease the space between the drum and the...

Does any one know where it is located I have been told its behind the right rear tire but I cant find it and have looked all over the place. thanks, glenn.

Their is a guy in ebay that is selling new 72" mid mount mowers for what I believe is the 2310/2810/3510 hst series for $750.00. It looks like the mower I just purchased for my 2810hst for twice that price. No affliation just wanted to make you all aware. glenn

I am trying to get to the bottom of something that has been nagging at me for a while. 1. Did your 2810hst come with a suspension seat or not and when did you take delivery of it. 2. Did your 2810hst come with a access step on both sides or just one. I don't know if I got caught in a model...

Does anyone have or have used one of those log splitters I have seen that mount up to the front of the skidsteer, either the ones you load or the ones that split from the top while you sit in the seat. what are you impressions. I can't get past the fact that you are standing in front of the...

Anyone out there hve experience plowing with both, i plw with an atv but the rtv with the dump body has me wondering if there is a better way. glenn...

my chipper pto shaft is too short to work with my speeco quick hitch. Can you safely lenghten the shaft, or can you use a spline extension like you would use for a pto pump or should i just go out and by and other shaft. thanks glenn

could anyone that has a mmm for a 2810hst please answer a few questions. 1. which size do you run 2. does it interfere with the use of the backhoe 3. how easy is it to install and remove 4. do you leave it on while doing other things like landscape rake or box blading 5. have you used a...

has any one used tire chains on skidsteers, with spring and mud season around the corner i was wondering if they would be a cheap alternative to tracks this is for personal use. i like to venture off the beaton path and havn't gotten stuck however could always use a little more traction. thanks...

does anyone out there have a ferris ztr with suspension, what do you think. I just saw one at a show and was impressed. currently have a scag tiger cub and am very happy with its durability, how does ferris compare. I have a hilly and bumpy smooth property and was thinking wife might appreciate...

fello forum posters, i have recently been given the go ahead for a new shop at work, it will be apporx 36 x 50 with a 14 foot high door. does anyone have a, experience with or know anyone who has a miracle truss steel building or experience good or bad with the company. thanks ahead of time...

Gentlemen, I am new to this tractor stuff. What is the purpose of the check chains on the 3pt hitch, my manual mentions them but it is very vague. thanks. glenn.