Search results

I have tried having the loader push down on the stack. It works until you get up to like 4. After that it always is an issue with pulling the stack down. Yeah I have seen a lot of different variants from European manufacturers. If the importing for one thing wasn't so expensive I would just...

Nice work. What material did you use to tube in the bottom picture to connect the pin holders? Did you use a bushings in that tube? If so which one?

At least I am not the only one :)

I have found that company as well. I contacted them about a video to see how much theirs move and haven’t heard back in over a week. Honestly, it seemed like a recipe for something to wear out quickly or get stuck in a weird way. I usually do 5 3x3x8s and do put the last 2 ontop of the bottom...

Those look like just flanged bronze bushings. Or are they something else?

True, I found a few manufacturers that make a bale spear with a hydraulic push off bar. My concern with that is how to coordinate driving back and pushing things bales off the tines at the same time. Retracting tines or hooks are a better option. And I have found those as well but those are...

Up to 3000 pounds, with 2 large square bales of alfalfa. When stacking over 3 high in my barn, pulling out the tines gets dicey. They tend to "stick" to the bales and want to pull the entire stack down. With the hinge you can "push off" without needing hydraulics. I designed stops into the...

I am trying to design some bale forks with folding bale tines. I got as far as the general structure. I am somewhat stuck on the details. The square tube are sized according to other bale forks I checked out (3x4x1/4, 2x4x1/8). The plate used is 3/4" right now, which may be overkill, but...

I have been looking for bale forks that can tilt/fold like they do in Europe because they tend to make stacking hay easier. I have found the ones from Westendorf and the ones from Manitou but they only appear to support one bale at a time or only come with the Manitou coupler. I could add an...

The first/high flow option needs new tires (which are included in the price). The standard flow option just needs back tires.

Hi, I am trying to decide between two Kubota SSV75. Option 1: 2022 High Flow 875 hrs 6 months of warranty left Came from hobby farm that “trades in every year” $46,800 Option 2: 2023 Standard Flow 1175 hrs Can purchase 2 more years of warranty for $1800 Was mostly used to move dirt around...

I agree that a welding/machine shop should be able to helpo you out. I do have a 2016 MF 1754 with a DL135 for sale if you are close to WI

Hi All, I have been digging through the owner’s manual for my 4707. The only reference to lubrication points I could find in the manual were two decals. Nothing else, no diagram, no reference in the table of contents or index. I am a little lost. One I found one of the said decals, but not the...

Another update… Added Power Service Diesel Clear to the tank. Used the tractor for about 2 hours and got the “water in fuel” error a couples times but always went away and didn’t show up for last 30 minutes. I am guessing it is the diesel in the tank being old.

I am mostly really annoyed at the fact that my old tractor had a water filter inline that you could drain and now you need to take the replace the entire fuel filter with a special wrench, but that is how it goes these days.

False alert… the water in fuel error is back. I will try the Power Series Clear Diesel and see what happens. I am really starting to think that the diesel is just old and started separating…

I am thinking about getting Power Series Clear Diesel just to make sure that the diesel in the tank from the dealer wasn’t like really old and started separating.

Update, this morning no codes anymore. just turned it on, throttle it up, moved it around a little, and nothing complained

Yeah that is my plan for tomorrow morning. Just want to make sure there isn’t something I can try first

Hi, I took delivery of a brand new MF 4707 two days ago. Yesterday, it started showing code “E 31 97” or “E 97 31” (water in the fuel). I called the dealer and they said it is okay to operate. The engine was derated but still enough to do some work. The code went away for a short period while...

I think so too. I will ping the dealer in the morning and see what they say. Thanks for the help!

Yeah I saw that too. But there is no part in the parts diagram. I am guessing it is part of the assembly and you can't buy it separately.

Well I just checked and I don't have that red band at all... I checked the parts book and they don't list it either...

Thank you! I know there is a little window on the metal shroud around the filter. I will need to check if the red ring is visible.

did check the fuel filter… is there water separator somewhere or just the filter?

Jan through March 2024

Hi All, I have been happy with my 2016 MF1754 so far. I had a 1000 hr service done roughly 60 hours ago (6 months ago). Everything was fine, but now when I drive through a bumpy part of my property I see some blue/white exhaust coming out of the exhaust intermittently. Like it starts goes away...

could you look up 2080-12 error code for me?

Hi, I have a MF 1754 that had a really hard time starting. First it wouldn't start at all, tried jumping it, no luck. It sounded like it just couldn't turn over all the way. Left it to look for a heating blanket. Tried again and it did turn on, but the RPMs where fluctuation between 500-1000...

I found the new model of the driveshaft part list: https://patsdriveline.com/wp-content/uploads/2020/02/comer_PTO_Driveshafts.pdf On page 65 it is supposed to be an M8 or M10 the diameter is ~5/8 inch, so M10

Thanks for the replies! Can anybody tell me the size of the bolt that I need?

Hi All, I broke a bolt on my Case IH BS174R, specifically part # BER657199. The description is Bolt - Grade 8.8 Shear, & Nut. Is there such a thing as Grade 8 shear bolts? Does anybody know what size the bolt is? The parts diagram says 6 are needed and I can’t figure where the other 5 are...

Yeah I found those, they just didnt have the size I needed. Some digging got me this set from the same manufacturer: MIXPOWER 11 Pieces 3/8-inch Drive Pipe Plug Socekt Set, SAE, CR-MO, Tapered Male Square Drive, Chamfered Female Square Drive https://a.co/d/4hotxZ8 Thanks for all the other...

Hi, I was getting my new to me Rhino SE8 ready for some last of the season mowing. I was trying to check the oil level in gearboxes. I found that the 1/8" square headed pipe plugs for level drain in really good condition for a 20 year old machine. I was able to get 2 of the 3 off, but the third...

I have been looking through manuel of my powershuttle 1754 and I can't find that reference. It claims it is the "coolant" temperature warning.

Sorry to dig up this old thread. I am confused by the dash warning symbols that OP posted. Aren’t those engine temperature warnings not hydro oil warnings?

The first guy who pulled the “I could get this cheaper elsewhere” based it on what the same model tractor sold on https://www.marketbook.ca/?gtmlt=1 which sure is a reputable source, but all the tractors were 800+ miles away. The second guy said he would give me $17k for it without seeing it...

2 weeks into selling the tractor and a people are telling they don’t think the price is reasonable after negotiating because there is a tractor 400+ miles away that cheaper. I kinda just want to them tell: “Then buy that one”. Is this normal?

Thanks. I thought the market was low on supply, but apparently this isn't the case or I have to wait until spring is actually here (we just 4 inches of snow). I have gotten a lot of tire kickers in the past week. I am/was not sure if the price is too high, people have some weird expectations...

Hi, I am trying to sell my L4310 with cab and loader. It has over 2500 hours on it. We just had it serviced at just over 2500 and repaired what needed repairing. The AC feels like it needs a recharge though. What would be a good price for this tractor? I have seen anywhere from $15k to $30k...

Thanks the big "advantage" of the other is that the freight pricing is fixed rather than an "estimate". But I rather spent ~$50 more to be on the safe site in terms of actually getting the parts.

Yeah they do. I basically had it down to glasscab.com allpartsstore.com (A&I direct store) tiredirontractorparts.com The cost of glass + freight is pretty much the same for all. More question of which one to pick. I am leaning to allpartsstore.com

Thanks, I was wondering why the A&I online store was redirecting me to all the JD dealers in the area. I was confused whether the freight shipping is to the dealership or directly to the consumer.

Hi All, I broke the door on my Kubota L4310 (15 minutes before trying to sell it no less). I found the OEM replacement door online for $700+. There is a non-OEM door abailable from A&I products. Anybody had any experience with them? Separate but related, has anybody had experience with Tired...

I converted the mp4 from the phone to a gif using Adobe Creative Cloud Express (had to use "small" output to get it small enough) or https://ezgif.com/video-to-gif I used the other functions (crop, etc.) to get it below upload size As far as I know yes. When looking at the parts book, I...

Hi, I just got a used MF1754 with a DL135. So far everything is great, but when trying to switch from a bucket to a bale spear (SSQA plate) I noticed that the curl/dump between the left and right side are not moving at the same pace. One side is always ahead of the other. This makes it...