Search results

If it's green, you're good to go! Just don't mix the green with the orange. The coolant in our tractors is just the standard glycol antifreeze.

My dealer sold me "Sinopec" hydraulic/ trans fluid. Mobil makes a good fluid, bunch of others out there. Just make sure it is transmission/ hydo fluid. http://sinolubesg.sinopec.com/sinolubesg/products/industry/hydraulic/

Hello neighbor! I wish we had a few more dealers out here! I went all the way down to Austin to get my LS! The Kubota and JD dealers down in Albq sure are proud ..... and their prices show it!

Congrats and have fun!

Yes, what K5lwq said.... it takes practice. You cannot fully pull (or even halfway) the controls. Feathering the valves will allow combination movements. I had previously used BH's, most of them used and abused and "loose". When I got my new one, it was like learning all over! I was literally...

Nice job! Looks like you definitely have some experience using a box blade for sure!

Oh, and here is a big package.... just for comparison (I know Sophie doesn't need all that stuff);) https://www.ldlenterprises.com/New-Inventory-2021-LS-Tractor-Package-T19-Bushnell-Florida-8970393

David, here is a mainland quote.... the price includes the loader (LS usually has a 'free loader' promotion). A MMM is around $2500, give or take $200.The drawbar is included. You mentioned only loader hydraulics, but that quote has all the rear remote parts listed...

I have purchased two tractors from out of state.... the first was 550 miles away and I rented a trailer and went and picked it up. Overall, under $400 to go get it (I also enjoy road trips). The second was from a dealer that was 500 miles away in the opposite direction. The dealer 'split' the...

NOTHING is 0% interest.... you're paying it upfront in the cost of the tractor. PLUS, the big K or JD are gonna cost a lot more to begin with!

Man, if it is half the price, get it! You can always add weight if needed.... at not much cost!

I have basically the same tractor (model number changed one month later). I can take the BH off in under 3 minutes. Piece of cake. Some times it takes 10 minutes to put it back on.... most of the time about 5 minutes.... also by myself. A second person can watch the subframe to make sure it is...

There is an LS and Massey dealer in Gallup NM, about an 1 1/2 hours from you. It's called Navajo Tractor. Might be worth it to give them a call.

Well, got most of the 250 hr service done.... everything greased (including me) (wish i had a zerk in the new knee). Still have to change out the hydraulic fluid but I couldn't find a 10 gal container that will fit under both drains. I will probably get a 'disposable' storage container for the...

Good morning to all! Low of 52, going up to mid to upper 80's. Rain chances have moved on to greener pastures...... not really any good chances until later in the week. There was an ominous cloud forming over us on Saturday, thought we were going to get a good storm.... nope, went south without...

You won't find LS msrp anywhere. Like diggin it said, search google for the model number:" LS MT225HE for sale"...... You should get to find different dealer pricing that way. If the dealer website says "call for quote" ... I usually just went past them. I have found dramatic differences...

Aaaahhhhh..... if you're taking off the 3 point to have the BH on, those plates and bolts aren't needed.... Then the BH goes on and off no problem.... The purpose of the retrofit kit is to be able to take the 3 point arms easily.... With the kit, you can do this either off or on in under 3...

The service manual is a great thing to have if you need to FIX your tractor..... very detailed and specific. Far more intense than a 'chiltons'.... they were written for the average driveway mechanic. Is it a good thing to have? Absolutely! I would call your dealer and ask him to put it on a...

"I also noticed amsoil tests their premium 5w40 vs T6 not the full synthetic T6" ------- Williy Did not know that T6 was available in ANYTHING but synthetic.....

Oh, forgot to mention, GREAT JOB ON THE TILE! David, the tile looks really good..... maybe do some jobs on the side and you won't have to use up the son's inheritance!;)

WooHoo! We got just under a 1/2" of rain. It actually just "rained" and not just a brief downpour. That should be all for tonight. I couldn't imagine getting 5" of rain.... there is no place for it to go... that would cause massive flooding. Happy anniversary! To Mr and Mrs PJ! Hope you have...

Good morning to all! Low of 54, going up to the mid 80's. A much better chance of showers and T-storms today. Didn't get any rain the past few days. I hope to get just a little the next few days.... Drew, good job on the BIG picture frame!:D Hope you Bucks Co guys don't get too much rain...

The LS merchandise site used to have them listed, but haven't seen themon there for a few months. Not sure if the supply chain issues have created a shortage or not. They only had 2, an MT125 and a cabbed tractor, I think it was an XR4140. Here isone for sale on ebay...

Nope.... most fit very easy. I put my thumb on in under 5 minutes, that included taking out the original pin on the bucket. I really thought I didn't put it on right because it was 'too easy'. it looks like the plates were not welded on at the same spot / aligned properly. A simple solution...

I was getting unsolicited emails 1-2 times daily asking to buy my properties. Also the typical realtor solicitations weekly in the mail.... I could tell that they just went off old public records because they kept referring to the 'vacant' land property.... I built a house on it 3 years ago...

Good morning to all! Low of 53, going for highs in the mid 80's. The predicted high was only supposed to be 81 yesterday, but hit 88. Clouds built in late yesterday, and a storm finally crossed over us, albeit very briefly. Only 1/10" in the gauge. Definitely not enough to do anything more than...

Good morning to all! Low of 56, going for a high of 81. It just might happen being there is heavy cloud cover this morning. No rain happened yesterday even though the skies were threatening and it looked like it was going to pour hard. There are some good chances for today.... Roy, enjoy the...

Buppies.... oh no! We are sending some extra prayers for you. I hope they are able to get it all and you have a speedy recovery!

I cannot remember.....

Talk about Dr's with addiction..... we used to go to an ophthalmologist that literally ran around his office.... We had multiple pairs of glasses ordered and were just waiting to pick up the order. When we got the call to pick them up, only the tech was there and the office staff were going...

Drew----- "Ted, what a view. Living on the Wide Prairie". Yes, the views are sometimes amazing. There are mountains to the north and west of us. The base of the northern mountain is about 3 miles away and goes almost straight up for about 2,000 ft. The mountains to the west are about 15 miles...

Finally remembered to take the camera out.... here is a pic of the new steps and of the drip lines.... I know if there isn't any pictures, it didn't happen...... It's 1 pm and a few storms are forming to the NE and S. Unfortunately, the storm track is from the SW to the NE.... neither one of...

Good morning to all! Low of 55, going up to the low 80's. Good chance of storms this afternoon. Clouds built up yesterday afternoon. By evening, there were close storms all around, but we only got about an 1/8". Nearby areas (5-15 miles away) had over 2-3" and flash flood warnings issued. Glad...

Mostly, congrats on the new granddaughter! Happy belated Anniversary to fiddlearound. BEF, being we don't get much rain, drip irrigation is a must. We have thousands of feet of drip tubing. I usually buy the supply tubing in 500' rolls. That and plenty of mulch to retain the moisture. Rich...

Good morning to all! Low of 58, going up to 86. Maybe a chance of a storm is in the forecast now. HAPPY ANNIVERSARY to Mr and Mrs Kyle! HAPPY ANNIVERSARY to Mr and Mrs Eric! Buppies, extra prayers sent your way. Hopefully they will get all of it. RNG, hope you can get all the bugs worked out...

Not sure if you have an LS or New Holland dealer nearby, but they also have a tractor similar to the Kioti you're looking at. The LS may be substantially less in cost..... worth it to at least look....

Good afternoon all! Low was 59 this morning, nice! Now it is up to 91.... a few clouds, but probably no storms will form. We got an early start this morning doing some errands and an appointment. Got back home and had a good lunch. I still have some more errands later this afternoon. Hopefully...

Nobody mentioned or asked if the tractor is still under warranty (should be with only 25 hours). Take it to the dealer to get fixed. Remember the old phrase.... " you break it, you buy it! ". Why take the chance?

Good morning to all! Low of 60, going for a high of 82. The forecasted highs have been on the low side.... seems we have been 5-6° higher than forecasted. Roy, sorry to hear about the mishap with the truck. Hope it isn't too costly... Drew, try to stay dry while going to meeting. Watch for...

Good morning to all! Low of 59.... they have the same temp forecast for the low for the next 6 days.... looks odd to see that uniformity. High today should be around 84. No rain until maybe Monday. I didn't get into town for the landscape timbers yesterday. Probably won't happen until next...

Good morning to all! Low of 58, going up to the mid 80's. All the chances of rain have vanished until maybe Sunday. Drip irrigation system will get a workout today. Today we celebrate our 38th anniversary.... we aren't planning any specific thing to do, just spend the day together and play it...

Good morning to all ! Low of 55, going up to the mid 80's. Still a chance of some showers.... I have given up on those chances... it seems we have a better chance to win the lottery! Piddled around yesterday, didn't do anything on the list.... just too hot and humid.... at least humid for our...

Good morning to all! Low of 58, going up to 86, chance of storms. Yesterday's forecast was only half correct, they predicted the time of the storms with good accuracy..... but the storms never made it to us. They all fizzled out before getting to us. Just got the strong downdraft winds. Paul...

Good morning to all! Low of 54, going up to 84. Good chances for a t-storm this evening, sunny and cool right now. No rain for the last 3 days, so I hope we get a storm. I took advantage of the nice weather and finished up taking the string trimmer for a long walk.... all stray weeds / grass...

PM me your email.... I can send the hydraulic chapter out of the service manual.

Seals on the rock shaft of the 3 point. It is a fairly easy repair.

Just do it yourself.... use windshield washer fluid if you're concerned about freezing. An adapter valve can be purchased very cheep (About $10). Search on YouTube for video 'Filling tractor tires'... there are a few showing how easy it is. Took me just over 4 hours, but I was filling 80 gals.

My vote is for R-4's. I have pushed 18" of snow down the 2200' long driveway using the loader bucket without any issues. I have run over chola and prickly pear cactus to the point that the tires were "covered" in cactus needles without getting a flat! As Jeff said, R-4's are 6 ply... a lot...

Good morning to all! Low of 56, only going up to 76 today. Another good chance for storms. Last evening around 19:30 a severe storm moved across, a funnel cloud spotted just to the west of us. The wind and rain hitting the house was coming from all different directions. Lost power a few...

Here is a link for a regular type tooth bar. Just look up your size that will fit your bucket. https://www.neatfarms.com/Bucket-Tooth-Bars/Heavy-Tooth-Bar---2AW I have one on my 66" bucket and it works really well for breaking up the hard dry ground here in NM.

Oh, forgot to mention....DO NOT waste your money on one of these ...

Inside for a break already.... only reads 82°, but humidity is up and I was really sweating.... not used to that here in our dry climate. I got the worst / heaviest area done.... It was a neglected area and some of the weeds had 3/4" stalks and were 4' -5' tall. The next area will be much faster...

Good morning to all! Low of 58, going up to 84. A better chance at some t-storms this afternoon. I just piddled around in the shop yesterday, just couldn't get motivated to take the trimmer for a walk. That will be this morning, while it is cool. There is only a small area that is 'necessary'...

Uneventful day, ran some errands with the wifey this morning. By the time we got home, it was too hot and smokey to get motivated to do any outside work. I then decided that I really needed a nap.... what I thought would only be an hour, became 4. It was worth it! The smoke is supposed to...

I was surprised that the fuel line disintegrated being that I used the so-called "good stuff" ----- Sta-Bil 360 marine. I really think it was just a coincidence..... the tractor is a '97, been using ethanol gas since new. The fuel line makes a "lazy U", with the filter being at the top of one...

Maybe $3K to $3500. A collector might pay more. Here is a link to one for sale for $2K https://www.ronmowers.com/ford-48-in-lgt-14d-diesel-lawn-mower/

Smoke to thick to play with the trimmer, also too hot. Daughter and family just left at 14:15 headed back to Colorado. Kyle, when I was in high school, most of my friends and girlfriend lived in Levittown. A really neat concept for affordable homes post WW2. Nice to hear about the great things...

You don let her shower at home?......... Sorry-- couldn't resist....:LOL:

Good morning to all! Low of58, going up to 92. Very heavy smoke from the NW and Cali coming over us now. Sun is red coming up this morning. Drew, glad you got a walk in this morning. I used to enjoy walking along the canal. I was wondering about the canal barges.... if they were still...

Oh, forgot Max... he's enjoying the cool evening air with us...

Tonight's sunset: I'm takin' lessons from Thomas.... now I'm settin' on the porch with the Mrs.

Good morning to all! Low of 58, going up to around 92.... heat is back. Only a slight chance of a t-storm. Monsoon flow returns next Tuesday or Wednesday. It will be dry and hot until then. Glad you made it through the deer encounter without getting hurt. Wng, nice to hear you had a good hike...

I looked into the shipping container route.... way too expensive they want over $5K for an 8x40 here. Then you have the hassle of trying to put in the windows and doors. Then you still have to furr out the inside for wall coverings. We spent $25k on the house (move in ready) and $15K on the...

RNG, the magnitude of those fires cannot be depicted by the videos. That is some scary stuff! I wonder if the retardant sprayed on the houses actually helps....

Good morning to all! Low of 53°, going up to 84. Only a slight chance of a t-storm.... now in a dryer period (don't know HOW it can be any drier...) until next week when the monsoon flow will return. Temps will be up into the lower 90's over the weekend. Got the trimmer head all set up, but...

We are currently living in a 'tiny house' at 510 SF. I absolutely love it! I guess we have been downsizing over the years. Our first home was just under 6,000SF (and it was a rancher), the second was a 3400 SF cape cod style. Our last house was again a rancher at 3,000 SF. I built all three...

Good morning to all! Low of 54°, going up to 81°. Chance of a t-storm later.... yesterday's forecasted showers didn't happen. Temps start climbing back up to around 90 by the weekend. Got most of the landscape beds around the house re-mulched / topped off yesterday, but still have about 16' of...

Happy belated birthday, Ken. Hope you have many more trips around the sun!

Good morning to all! Low of 56, going for a high of 82. There was a brief shower / t-storm last night. Barely anything in the rain gauge, at least not enough to make it to a line (yes, just an old school gauge). A greater chance of showers forecasted for today and tomorrow. PJ, sorry to hear...

That is a really nice cover. Good install too!

RNG----"You've been busy, Ted! Does that sheet metal rattle in the wind? And that's a doozie of a scar." Surprisingly, it doesn't make any noise at all... even in the wind. The only noise has been from some small hail hitting it. We have a metal roof and an open underside metal porch roof...

Good morning to all! Low of 58 this morning, 76 forecasted high, chance of T-storms. We had a brief sprinkle this morning, so moisture is in place for those storms. Agenda for today involves going into the big city for some errands then possibly working on the drip system after returning...

HAPPY BIRTHDAY! Randy.

Here is a recent pic of the knee..... I think it swells more than it should.... surgeon isn't concerned though.

It's a bit hotter here for sure.... and a lot drier! I have never seen humidity go higher than 80%.... and that was during a steady rain event a few years back. Yesterday, right after the thunderstorm, humidity went up to 65% from 40% prior to the storm. Good thought on painting the...

BEF, look into a Furrion brand a/c for the camper. They have the highest volume of air movement, the coldest cooling, and are the quietest on the market. My son just did a lot of research and comparisons between all the major brands. I am not sure of the price.

Wng, the 'Vax-to-the-max" sweepstakes took the state to over 70% vaccination rate, up from around 50%. Our cases have also creeped upwards, but hospitalization and death numbers are very low. Only about 20-25% of people are still wearing masks. RNG, yes, it is supposed to be the monsoon season...

Well, rain stopped.... only 2/10" in the gauge. There are still a buch of dark clouds hanging around, so maybe some more coming. Drew, I bet even an inch of rain a day would only slightly slow the fire spread. There was a newscast a few days ago reporting that the rain showers that were...

WOOHOO! It's raining! Nothing heavy right now, just a steady rain. We'll see how much we get..... Needless to say, drip irrigation project is at a temporary standstill. We have accomplished a lot of outdoor stuff little by little. I honestly believe that this will be the 'new normal' for me...

BEF, looks like a nice camping spot! We still need to get out in ours... probably won't happen until next year. We were very surprised to hear about the tornadoes in Bucks Co. Glad that major damage wasn't more widespread. My SIL and BIL live outside of Ottsville and they had a bunch of trees...

Good morning to all! Low of 63, going up to around 85 with a cold front moving across sometimes late today. With that front, our chances of rain increase tonight and tomorrow. A couple of weeks ago, the weather guessers were predicting 70-80% chances of rain / storms the for the entire...

Here is a possibility.. https://asktractormike.com/product/tractor-loader-cylinder-safety-stops/

With a broken heart, and tears in my eyes.......Kassie, 01/29/2006 - 07/01/2021

Congrats! All good things come to those who wait......

This talk of the midsize trucks is interesting..... When I was shopping, I looked at the Colorado, Ranger, Tacoma, and the Frontier. The Nissan Frontier had the towing capacity the same as the others, had the same options, but was substantially cheaper by $4-5K. The ride is quite comfortable...

Hello everyone. Been busy trying to get things done around here. Not real big projects, but numerous in quantity. Our massive heat wave and drought seems to have broken for at least the week. Rain here has been sparse, so far only 2/10ths in the gauge. We were watching the flooding going on in...

Well, it is either a belly mower (mid mount mower) or a 3 point..... can't be both....

Yep, I was getting it too on my Ipad / Safari.... went and refreshed my 'ad blocker'.... now gone!

Basically what Avenger said..... less toxic (contains methanol which evaporates), costs far less (would need 15-20 gallons of antifreeze per tire to make a 50/50 mix).

It sold within a week

Billy, my condolences on the loss of your friend and companion. The hurt goes deep.... time will heal, then all the great memories will help. 😭

Sure! I was able to get a 55 gal drum of -25° WWF from a local auto parts supplier (Parts Plus) for $125.... then another 20 gals from Walmart. Picked up this adapter at TSC: https://shop.slime.com/products/tractor-air-water-adapter-kit?variant=47567293640 I was originally going to use a...

Finally got around to filling the rears with washer fluid..... 5 hours later (including breaks because it was 96+ degrees) they are filled! I can definitely feel a difference, and was able to get a heaping bucket of dirt scooped up from a pile while in 2wd. It only took 82 gallons....

Heck, around these parts, that's a high dollar tractor! I cannot believe the piles of junk that people try to sell.

My neighbor used a 5' on his 225-S.... worked very good. I have a 5' for my 225E---- it could easily handle a 6'. I wish I got the 6 footer....

Well, if you're interested in a Kubota.... that's a massey....

Just get some 2-2 1/2" x5/16" or 3/8" thickness angle iron and cut them to length. Drill a few holes... and... WALA! Stabilizer feet! A lot cheaper too! Don't get me wrong, the BF feet are seriously heavy duty, but they seem expensive....

Great job! I would turn them around to be at the widest point on the feet.

So, LS has the motor oil / filter , hydraulic and HST filters only, at 50 hrs, then every 200 hrs thereafter for the motor oil. The first hydraulic OIL change is at 250 hours. Air and fuel filters also done at 250 hrs. I have the dual air filter on mine, so I blow out / clean the outer air...

Good morning to all! Low of 52, going up to 92. No rain... everything brown in the fields. Heard the wind chimes this morning really clanging.... yep windy...must be the excess from RNG leaving the window open again.... It's really hazy and smokey, the wind blowing in smoke from a fire in...

Welcome to TBN!

Mine uses Sinopec hydraulic fluid. I do my own service, so buy it from them in 5 gal. pails. I use Rotella T-6 for the engine oil.

Yes, it is the same neighbor.... he is selling most of his stuff off at this point.... tractor, 20' new PJ trailer, 2 horse trailer, 12 and 14' enclosed trailers. All but the horse trailer are only about a year old.

Good morning to all! Low of 55, going up to near 90 again... both Sat and Sun hit 92. NO RAIN! Again, all around us, just bypassing our area... Only caught a brief report of a wildfire to the north of us, but this morning, the sky is very hazy and filled with smoke. I am assuming it has grown...

With spacers on the rear tires, it pushes them out far enough that they will hit on the guide wheels on the deck.

HaHa! John will get a kick out of that!

A box blade will help with that, but is not the ideal attachment. Look into a 'land plane', especially one that has scarifiers. Here is an example: https://homesteadimplements.com/land-plane-independence-series/

The best advice in this crazy market is to get other quotes from other dealers, then use those for negotiations. You may have the best price already! I notice you are located in Spicewood... are you dealing with RCO tractor? If so tell John that Ted sent you over and to give you a better price...

Good morning to all! Low of only 52, 77 already at 8 am, should hit our first 90 later. No rain still, storms going all around, just not here! My neighbor has been having some health issues and is now forced to sell his relatively new tractor and implements. A real shame. Life's travels can...

I just posted a like new MT225-S in the "tractors for sale" forum. It will be a good deal for someone....

Especially like the black album, but all are good!

When I was looking at Kubota a few years ago, the local dealer prices were about 15% higher than the build site. The dealer told me prices were "regional and determined by the dealer"..... the build site was only "manufacturers suggested price"..... It occurs with all brands. It will occur...

Here is a link to a dealer in Phoenix, Az. They have a few in stock.... All Inventory | Team Tractor & Equipment

Good morning to all! Low this morning was 51 and a little damp. Our chances for rain were very good yesterday, but of course, we only got about 1/10". All around us there was torrential downpours and rain totals in inches..... just not here! I am envious of all the pictures posted of beautiful...

What was the best dog I ever had? Simple answer..... EVERY ONE OF THEM! I still miss all the ones that have crossed the rainbow bridge....😭

Welcome to TBN! That's some beautiful country you're working in!

I am surprised that there isn't a link to the Yanmar tractors.... seems that is the only answer...

I use Flavor Apprentice "blueberry extra". Not sweet at all, but good flavor! One of my favorites!

That's where I bought my first LS. Great dealership, but they couldn't come close to the price (about $2500 more) for my XG3025. The dealer down in Austin really blew their price away! RCO Tractor - New & Used Agricultural Equipment Sales, Service, and Parts with locations in Spicewood and...

It is the NH Workmaster 25-S that is the equivalent of the 125. The Workmaster '25' is the equivalent of the MT225E.

Glad you got it to work out without too much trouble!

Nice job!... thanks for posting!

The check valve on the cylinder prevents any movement of the piston, essentially locking the cylinder.

It is simple here in this state.... when you title anything using two names, just title it as "John OR Jane Doe". As long as the 'OR' is there, either one can sell or assign the title. If one passes.... no issues. Unfortunately, this could also be a bad thing.... say, if a loan is in only one...

No, the 225 does not have the rear lever. No cab, so I just reach over the fender.....:)

I would grind the thumb... lots more pressure / stress on the bucket. My neighbor has the 225-S, the dealer ground the thumb when they ran into the same issue. It was one of the first thumbs that came from LS, I believe they changed the manufacture of newer thumbs due to the same issue...

Yep, probably blown seal. I can only get maybe one squirt of grease in there ....none oozes out.

Forgo the MMM and get the other things you mentioned.... far more useful! You can get an RFM later if you need, at a better price too!

Nice tractor! I'm not sure if you would like tool boxes up higher, but I mounted one on each side of the ROPS. One holds pins, clips, straps, and misc hardware. The other has the few simple tools... This was the only pic I have of them....

JD uses proprietary attachments. Kubota uses any standard universal tractor attachments.

They normally have the 3510 with a BH, but don't current see it listed...maybe give a call... Here is a 57HP w/ BH for $2K more than your quote.. https://www.teamtractor.com/default.asp?page=xInventoryDetail&id=9192415&p=2&s=Year&d=D&vt=tractor&fr=xAllInventory

Those two listings aren't even in the same class.... The CK3510 is a much larger tractor Here is a CK3510 listing... in stock.. https://www.teamtractor.com/default.asp?page=xInventoryDetail&id=10312838&p=1&s=Year&d=D&vt=tractor&fr=xAllInventory

I don't think you have to worry about RCO going away any time soon. They opened up their second dealership up in Greenville. John is fantastic! I know 4 people that have bought from them, they take care of their customers for sure! John ALWAYS has the time to speak with his customers and answer...

I am curious.... what dealer in Lubbock? There are none listed selling LS.... If there was, it would make it a lot easier for me than going down to Austin.

Well, Yanmar engines are used in a lot of commercial equipment.... too many to even sort..... generators, industrial pumps, etc.... You had mentioned tractors.... not just the engine. Absolutely correct... Yanmar makes GREAT engines for a long time!

Congrats! Great little workhorse. Post pics when you get it!

I agree! Post it here.... I found you guys from here.... placed 2 orders in the last couple of months. The orders were for fittings that couldn't be found any place locally. Super fast shipping and great customer service! I grew up in Philly and had a great conversation with with a gal there...

Kioti CK3510 Dimensions Length w/ 3-point hitch - 120.9 in. (3,070 mm) Width - 54.5 in. (1,385 mm) Height from Top of ROPS - 99.2 in. (2,520 mm) Wheelbase - 65.7 in. (1,670 mm) Ground Clearance - 13.4 in. (340 mm) Min. Turning Radius w/ Brake - 8.0 ft. (2.4 m) Weight w/ Ag Tires w/ ROPS - 2,679...

My neighbor has the 225-S..... absolutely awesome machine! If it was available at the time, I would have purchased the 225-S instead of my XG3025 (MT225E). Don't get me wrong, I really like my tractor, but the 225-S is more maneuverable but is still really strong. The BH has the same specs as...

Many, many years ago, I used t be a framer and timber framer..... never thought twice about walking across the top of a 2x4 wall two stories off the ground. When doing a timber frame, it was a piece of cake... timbers much wider! Now, its hard to stay upright on a flat 2x12 plank.... I...

Ahhh, a couple of guys on ropes and a couple mig welders could fix that right up! ......not..... that took some stress.

Looks like only JD (who contracted Yanmar to build them) and Zen-Noh...... mmmmm.... just 2 listed...

Sorry it took so long to reply.... it is an SLH01 cylinder, 4" stroke. Here is where I got it from: A&I Products Link A-SLH01 There are other places too, here is one that lists the specs:SLH01 - Hydraulic Side Link Cylinder, Cat 0 Base End w/ Clevis Rod End (2" Bore) | Up to 60% off Dealer...

Yes, the SA series has a smaller quick attach. Not sure if it is proprietary or a 'standard subcompact' AKA smaller one.

Nice! At least you can play with the tractor...ehhh... I mean work with it. Plus you get to play with some metal parts....

Yep, never had to use the loader to get BH pins out..... something still out of alignment.

I also keep caps on ever one of the zerks.... pop it off, grease, put back on.... easy peasy

deleted....

I would say I use 4x4 about 50% of the time. Definitely when doing loader work or pulling a heavy box blade.

My neighbor bought the 225s and had the same issue. When he took it back for service, the dealer loosened all the loader mounts and 'realigned' the loader. Came back perfectly level and has not changed over the last 8 months.

Welcome to TBN!

Welcome to TBN! Great site for info and help.

Yes, I would return a defective item, even if it was a dollar! I might not make a 'special trip' to do so, but the next time I would be in that store or in the close area, it would be going back. Just did it on a couple of pizzas.... they were not made correctly to our order. Bad on me for not...

It is smaller than a standard SSQA. There are a few smaller sized attachments out there, but not many.

What dealer did you get it from?

I believe it can vary even in the same manufacturer line, same models. I had an LS mt125 SCUT.... the HST whined loudly all the time. My neighbor bought a 125, it was about half as loud as mine. We both "upgraded".... me to a shuttle shift gear LS XG3025. He went with the new MT225-S, again...

Yeah, don't let them shim it out.... those mounts need to mount flat/ flush to the tractor. That prevents any movement... you start to allow any movement, something is going to break! Either the mounts are made incorrectly/ out of alignment, or the BH subframe is out of square / mis-welded...

$1750 plus your old loader? WOW... thats a good deal... go for it!

I just picked up 60 bags of the mulch from Lowes.... can't get it any cheaper... I have it all stacked behind the shed. I'll use the tractor to distribute the bags to where needed.

It has a 2" bore, 4" stroke, 1 1/4" rod.

Here are a couple pics of the cylinder mounted... If you enlarge, you can see the adaptors.

Mine did the same thing. I ended up getting #6 ORB to 3/8" BSPT adapters from discount hydraulics. They were both #6 male, one was 3/8" BSPT female, the other 3/8" BSPT male. Also a pack of the O-rings that fit the #6. The hoses mounted directly to the fittings, the ORB type sealed first try...

The talk of "raising wages" not accomplishing anything, I beg to differ..... About 7 years ago, the EMS company that I worked for was a 'stand alone' subsidiary of a nationwide healthcare provider (hospitals, urgent cares, and even health insurer). The higher up bean counters decided that the...

Popgadget, thanks for sharing the pic of your place, very beautiful. I wish we had half of the greenery you have there! First hummingbird of the season showed up this morning.... we scrambled and made up some juice and got it hung up. Drew, sorry to hear about your misadventure at the Giant...

Good morning to all! Low of 48, going up to 78, a decent chance of a T-storm this afternoon. A fairly productive day yesterday.... all while taking it easy... so it can be done! I was able to get the hydraulic side link mounted on the tractor. Works as planned, maybe a real world test this...

I may have gotten lucky, but my Craftsman GTS6500 is still going strong since 2006. I have beaten and abused this tractor, cutting 5 acres of rough and bumpy field grass, pulled a utility trailer hauling mulch or dirt. Probably has 8-900 hours on it. I found out last year that the trans is a...

Finally got the hydraulic side link installed! I had to modify the top cylinder mount from a ball swivel to a clevis. Cut and welded the clevis to fit the factory swivel, then welded it onto the cylinder. Perfect fit! All-in, cost $250 with the hoses. Here is welding the clevis onto the...

I had my MT125 TLB for 2 years, not one problem! Great little tractor, a real workhorse. I did work with it that most would say needed a full size tractor, like installing a full septic system. He wouldn't have any issues doing what you described plus some!

I finally got a chance to modify a cylinder from a ball type end to a clevis end and get it installed on the tractor! Works great! I just need to get some hose protector sheath. I hope to try it out with the box blade this weekend. The hydraulic top cylinder made a big difference for sure...

I figured a combination of Beverly Hillbillies and Gilligan's Island.....

Good morning to all! Low was 45, going up to 75. Highs this weekend will be around 80. Hopefully some showers will make their way over us. Drew, at least you now have some game plan for recovery. Little bites... slow and sure.... HAPPY BELATED BIRTHDAY to Mrs RS!🥳 Ron, I am so glad you are...

One word: pontoons...

I was working in the cardiac care unit at a hospital. One of my patients introduced his daughter to me one afternoon during visiting hours. I ended up staying 2 hours after shift talking to her in the nurses lounge. I never asked for her number.... totally unintentionally.... The next morning...

I have an LS, but the BH mounts are the same type.... I would bet they are made in the same factory, they are so similar. Like others have said, the pins slip out super easy... they should not be tight at all! There is something out of alignment or made wrong.

Changing the cylinders would be a lot cheaper for sure!

I would keep them in a profit situation for sure.... because I would have to buy them almost weekly.... for some reason, I break the mounting tabs of in about 10 minutes of using the implement. I really take care of my stuff... but just no luck with those tubes.... :oops:

You got a good deal! Let us know how it works out for you.

Like ptsg said, it should just slide into a couple of gooves. On my LS, I do have to push down lightly on the joystick to get it to lock.

Finally.... sorry you had to wait for so long. I was using the link as it came (ball link at top), but I was afraid it was going to put too much stress on just the side of the lift arm. I finally got around to cutting off the ball end and making the "U" type mount. Here's a couple of pics...

Good morning to all! Low of 45, going up to near 70 today, light breezes at 10-15mph. Maybe some isolated showers tomorrow and Friday, just a slim chance... Did a little clean up in the shop yesterday, a couple short errands done, then did some burgers on the grill. Just took it easy all day...

I just had mine replaced on Feb 12th. I was amazed that I was able to walk unassisted within about 3-4 days. I didn't start PT until week 3. They WILL try and push you.... don't do it if it starts to hurt! At my 6 week follow up with the surgeon, he told me everything looked good, I had...

Yep, I have to defend it also. Mine is at least 15 years old, sat outside its entire life. Probably at least 500 bags mixed in it over the years. Motor is finally getting tired... it will mix one 80# bag ok. I recently tried 2- 60# bags and the motor was struggling. I definitely got my money's...

Good morning to all! Low of 39, going up to mid 60's. The outside is still damp after an afternoon shower yesterday---- WOOHOO! It was only a .25" total, but hey.... better than nothing! The rest of the week will remain dry, temps here are forecasted to be in the mid 80's by the weekend. I have...

The trans in that one is not the greatest, but a little better one than most. If I was going to purchase, I would upgrade to the next one, much better trans (K-66) and has a manual diff lock. It's only a $300 upgrade to the next model...

I think he probably bought something already.... maybe 2 over the last 8 years....:oops:

Sad, for sure. Need to listen to that little voice inside....

My brain hurts now.....

So, part of a statistical problem could be that LS makes most of the NH <50HP .... so doesn't manufacturer come into play? That would make LS bigger.....oh, LS also makes the smaller Case/IH tractors too. ....mmmm, 3 tractor brands all made by one manufacturer and rebranded. I think that is a...

You will do fine with a 25 HP class COMPACT tractor. You will have greater weight, traction, and capabilities with a compact size. I would steer away from the subcompact, even the larger subcompact sized frame for your tasks, both now and future from what you describe. They are great tractors...

well, the SA324 might lift some of the smaller rocks, but not the mid size or up.... it's a subcompact! The same class as the MT125. Did you own an LS 125? Pretty strong statement.... Well, I had one.... 225 hours in less than 2 years. NOT ONE PROBLEM! That was grading a new homesite, grading/...

I would go to both of them, sit on the tractors, itemize standard features, price sometimes can be wide apart. I have my second LS tractor. Both have never disappointed me. I am impressed by them so much, and by the customer service that I have received from 2 different LS dealers, I would not...

Bruising is progressing... found a couple more. One right on top of the new knee.... I have been having some issues walking since yesterday afternoon, the tendons behind the knee are really complaining. I'm sure they got stretched / irritated. Today, just took my time walking and did some of...

You do know what PT stands for .... PREMEDITATED TORTURE !

Each time you are done reading.... meaning ALL the threads you're going to read until next time, hit the "mark forums read" at the top banner. This should bring up the first 'unread' posts in each thread when you return.... works for me...

Better to be stiff and able to pivot than be loose and sloppy. Think about the weight of your tractor.... I bet it pivots without a problem when the tractor is moving!

Congrats! Nice tractor! OH NO.... I SEE A PROBLEM! There isn't any dirt on it!:D(y)

That's about it.

Nice looking unit! Congrats! I see a problem though.... there isn't any dirt on it!:D(y)