Search results

Did the shops you took it to specialize in head repair?

Don't know if new are available. I should have a used one.

If the lever doesn't move at all, it is probably froze where it goes through the housing. Spray nut loosener on it & tap gently. It should eventually move a little. then keep working it back & forth.

Sd1540 or SL1540? I have parts tractor of both models or can supply aftermarket

There is a fuel filter in the banjo fitting where the line attaches to the card. Other common carb problem is bad accelerator pump. The S650 is not gravity fed & has a fuel pump. the fuel system is not pressure regulated

Most control valves spools are machine fit without orings

Do you need a new pump ? As old as that is I'd be surprised if that particular pump is available. My pump supplier may know what it is & can probably supply a compareable pump.

I would first check the hydraulic pressure. Does it jerk as it is going up?

I can supply new & used S650 parts

KI still have the loader. Dixon IL 61021

I can supply parts for the TS1610 including fwd seals.

I parted out a K4D. Basically the same tractor. FWD gears that go bad are all ready gone

I can supply you with Yanmar parts

I have a farm & use tools hard . I was buying tools from Harbor Freight when they were only mail order. the quality of wrenches has improved a lot. I used to buy them to put a set in every tractor. I'd rather loose a cheap wrench than an expensive one. I've bought quite a few of the 4-1/2'...

looking for salvage or broken tractors

I can supply you parts from the USA. Email me at parts at sheaftractor.net Je peux vous fournir des pièces depuis les USA. Envoyez-moi un e-mail à parts at sheaftractor.net

Most Japanese tractors were used mainly for rototilling on small plots. Tractors with loaders usually were on livestock farms.

the Suzue M2001 has the K3D engine. What is the pto shaft like?

There is an internal spring. If it hasn't been used for a while, spray a nut loosener on the shaft where it enters the housing. Probably rusted.

I may have carrier and can supply associated bearings. no to front ring, pinion,

I'm a Sparex dealer . They don't have ring/pinions. The part is discontinued. About the only option is to have one made. Very expensive.

Most Japanese tractors did not come with loaders. It could be a Japanese, Vietnamese or a US loader.

If you can't ge tit loose saw the nut

It is discontinued. Can't find any used. I've priced having them made. Very expensive

I have a TU operator's manual availabial

I can supply you a parts book & closest service & owners manual. Also parts. Email me at parts at sheaftractor.net for manuals

I imported tractors & parts from Japan. I was never able to get a service manual from Japan.I recommended people to get the parts book so you have the breakdown & part #s for their manual. Them get the closest US service manual which is the YM169. I usually look at the parts book before the...

I don't read Japanese. From the parts book it looks like what I think is the 2 speed is electrically activated. I have an RX302 which looks like the same setup as the RX301. Email me at parts at sheaftractor.net for manuals

the 2 speed is a pedal on the floor. I can supply a parts book.

You don't want to dead head a pump. Dead heading is when the pressure line is blocked. If you disconnected the the loader hoses & they had snap couplers that you did not connect together & ran the tractor the oil from the pump would build up tremendous pressure & damage the pump. There are not...

i CAN SUPPLY YOU A YOKE ASSEMBLY & TIE ROD ENDS. eMAIL ME AT PARTS@SHEAFTRACTOR.NET

DO YOU NEED THE FUEL LIFT PUMP OR THE INJECTOR PUMP?

EMAIL ME AT PARTS AT SHEAFTRACTOR.NET

It was either overfilled or it has water in it.

Did you sell the tractor? I would be interested if you still have it.

I have one but it will need to be rebuilt

I can supply you with seals. The axle has to be removed to replace the seal. You have to remove the lift housing to access the circlip that holds the axle in.

deereman75 GAVE THE BEST RESPONSE. iF YOU HAVE TUBES $ CHLORIDE IS LEAKING, GET THE TUBE REPAIRED RIGHT AWAY. Rims RUST OUT WHEN THE OWNER WAITS TO GET IT REPAIRED. MOST OF MY TRACTORS HAVE CHLORIDE. MY jd2030 IS TUBELESS & THE RIMS HAVEN'T RUSTED.

I make these. I have centers plasma cut & use new rims.

Did you dead head the pump?

Agco should have a service manual for it. I can supply parts

I believe I sent you an email with pricing for under $1000. If you do decide to sell the tractor as is, I'm always interested in parts tractors.

The design used on the TU series was not used on US models. The closest would have the same engine series. Massey 1240 or 1125

I may have a used pump.

I don't like to do pricing on message boards. I sent you a private message.

Rebuilt or new are available. email me at parts at sheaftractor.net

Cut the pressure line, attach IN on valve to pump side OUT to rear end of lne.

I can supply injectors. There is a serial # break. You can email me

yes . email me at parts@sheaftractor.net

There are parts available. I have my doubts that tie rods are available but I can check. Email me at parts@sheaftractor.net

If you don't want to fight them every year, put Tordon on the stumps

I have a governor for sale if you are still looking.

I thought I had some Haban manuals but they were for the Haban snowblower 357-f & belly mower MTM48. I have access to a lot of mower blades & belts. Do you have a specs?

I can suppy new or used injectors

First thing I would do is check the hydraulic pressure. It should be around 2000psi at high rpm.

I will having a head coming in in a couple months.

I can supply manuals for your tractor. Hard copy only. parts at sheaftractor.net

I can supply a service manual & parts book. Hard copy only.

What parts do you need? I don't have any ring /pinions, but I do have other parts.

I can supply a manual for the US model equivalent.

HST does require power. It uses a hydraulic pump to run a hydraulic motor. The shuttle shift usually uses gears with hydraulic clutches to engage & disengage gears which doesn't use as much power.

I use some to oil the wood decks on my trailers & roller chains on equipment.

I can supply both.

Contact me at parts@sheaftractor.net www.japanesetractorparts.com

contact me if you have or know of any hurting Japanese built tractors or parts. I buy burnt, broken or warn out tractors.

does one have to pull the engine to replace the coupler?

Anyone have a b1600 parts book?

Looking for used parts for 5500. Anyone know of any salvage tractors? Please email me

Will buy non running, damaged, submerged, etc tractors or components. Email me with what you have.

I have a V30 that I bought from an insurance company. It had been flooded in 10" of water for a short period. There wasn't water in the gas or oil. It runs , moves, hydraulics work. Four of five hydraulic controls at center operate --steer, blade up, blade angle, boom up. Far right is crowd. It...

want to buy junk compact tractors. any condition. state condition , location, asking price. Thanks

I'm having some of these gears being made. the number I get depends on the demand. If you are interested in one or more, please email me.

Has anyone mounted a loader on a TU180/200/185/205/220/240 ? If so what mounting brackets & loader did you use?

I have a customer looking for parts for the shuttle shift on a TA210. He says there is a lever on the dash that switches the tractor from reverse to forward. I can not find anything in the parts book that shows this control or the shift forks that it operates in the transmission. . I've e-mailed...

I'm looking for the following Hinomoto parts books Any N-series & E222/4. Please email if you have any. Thanks

I'm looking for Japanese tractors that are mechanically challenged. Either privately owned or at auction . I've heard that there are some auctions that sell quite a few "returned for warranty" tractors, but haven't been able to come up with any contact information. I'm interested in all brands...

I'm looking for Japanese tractors that are mechanically challenged. Either privately owned or at auction . I've heard that there are some auctions that sell quite a few "returned for warranty" tractors, but haven't been able to come up with any contact information. I'm interested in all brands...

I'm looking for Japanese tractors that are mechanically challenged. Either privately owned or at auction . I've heard that there are some auctions that sell quite a few "returned for warranty" tractors, but haven't been able to come up with any contact information. I'm interested in all brands...

I've had 3 inquires from people that bought a tractor from a dealer in Ohio. He is advertising "Yanmars" in a car trader magazine. He tells people they are new. He's selling Shibaura tractors with Yanmar decals on them, overstating the hp & understating the age. Beware.