Search results

Today I had the dual turn signal indicator on with key on and running, I removed bulb holder and fiddled around with the wires and reinstalled and it went out. However, the HST light was now on. I did the same thing and it went out, then the headlight indicator was on and I did the same thing...

A friend has a B7800 Hydro and she has to move the forward and backward pedals until the tractor will crank over. Is there an adjustment to make? any suggestions will help. Thanks

I found a source for tines for my Shibaura tiller. There are 2 styles and each has different measurements. One has a gentle curve and the other has a sharp curve. It looks like both will fit. My question is should I go with the gentle or sharp curve? Kevin

I have a Kubota BX2230 and bought a used 48" Shibaura RS 2126 tiller. Are these things geared to spin as if the tiller is pushing you? (front to back) the tines are more like curved blades to a point. When spinning the point enters the ground last. If this is a wrong setup can anything be changed?

Does anyone know where to get information on the Shibaura rs2126 tiller. I bought one for $400 and need a couple of replacement tines. Thanks Kevin

Has anyone bolted on ends to a back blade to make a box blade? I have seen road graders that do that. I would think it would be more versatile that way and not weigh as much. Kevin

Hi everyone, I am doing the 50hr service and the owners manual says that it takes 2.7qts of SUDT. I called the dealer and the person who answered said that does not sound right. What should the amount be? I also have a loader. Thanks Kevin

Hi, I just got a new BX2230 w/FEL, 5' backblade. The backblade in the up position is only 6" above the ground. Any slight dip and it hits the ground. Is there a way to get it higher off the ground? Kevin

Will the BX2230 hydraulics handle a 3 pt logsplitter? The one I bought comes with a 3 position valve, what is that and should I get a 4 position valve. What does it do? the salesman did'nt explain it very well. Kevin

Well I did it. Bought a BX2230 with FEL for $10,895. I was looking at the JD 2210 but since they would not come down on the $12500 my wife said were going to Kubota! I have 2.5 acres, of which just over 1 is house and lawn. The rest is firs (about 70) and pasture. I also have a 800' long...

I ahve looked at the other brands out there and came across this one. On Saturday I drove 100 miles to test drive a CK20 manual and HST. The HST pedal is in an awkward place, to far back (I'm 6'2") and the manual just does'nt seem right. What is the purpose of split brakes if they are on the...

Hi, I'm new here and have been lurking around reading the posts. I have a level 2.5 acres (1.75 pasture) and a 750' gravel drive. I dont need a mower but do need a FEL, box scraper and eventually a tiller. I currently have a '53 Ferguson w/FEL (a royal pain to steer). Anything with power...