Search results

I just wanted to share a couple of things that has made trailer hauling a lot less hassle as I haul one many miles per year. The best thing was to get away from trailer tires and go to LT tires, mine are 16", and I use a bias ply tire and get good life from them. I am sure a radial would get...

I found a 8' Gannon hydraulic rippers box blade for $600 on Craig's list and am going to look at it tomorrow. I notice it has a wore out blade on back but a new one is $130. It also looks to be modified on the outer lower edges. It looks like it had skid shoes added to it. I am pretty good at...

I am wanting to run 3 remotes of which 2 will run TNT set-up and the 3rd for future use. I am thinking about using a electric over hydraulic type solenoid valve and sub plate set up and use a Scorpion handle w/ 4 buttons for the TNT mounted on my up/ down control handle and a rocker switch in an...

I saw this on Craigslist and was wondering if anybody knows anything about it as there was no info on it. I am not interested in buying it but was just curious

I have a Takeuchi tb135 and I installed a hydraulic thumb and used the auxiliary circuit. My question is does this circuit have a built in relief valve or do I need to add one? I busted a hose because of pressure but it was fairly used and had bad spot but it got me thinking about the relief...

I just wanted to show y'all the work I have been doing on the cutter I bought a while back off of Craigslist. I have used a wire wheel and other various attachments to remove surface rust, then treated the areas and used heavy rust primer and then 3 finish coats. I still have to do the 3 point...

I was looking at skidsteers on craigslist and ran across a ad that was out of place for a Schulte XH600 rotary cutter that was stated to be in good working condition for $650. I already have a Landpride RCR2672 which I work very hard at times and have worried that if I break it I would have no...

I am trying to find replacement teeth for my Takeuchi TB135 it has a 24" cp bucket on it. Where can I find replacements online and what information do I need to get the replacements ordered? Thanks John

Do y'all think rotella t-6 5w-40w is good choice for my tractor and if so what hour ratio should it be changed? John

I am looking at used excavators and ran across some good deals on 2006-2007 Takeuchi 135 they are available with full warranty for up to 2 years, and some have under 2000 hrs. They are available with full maintaince history. I was needing something to do light clearing and digging up stumps...

I am in the process of adding a grapple to my Kubota MX4700 and I understand that a Diverter valve is the easiest and most economical way to go. My question is which valve exactly that I need, I was hoping that J.J. could point me in the right direction. I have looked up some specs on my model...

My neighbor has a Jinma JM224 he wants to service it but needs some info. What type of gear lube does the transmission and creeper case use? And I believe from what I can gather it uses 5.55 gal. ?? I see it has a dipstick to check it and I understand that it takes a little time for it to flow...

I found a used box blade on Craigslist it is a Gill SR25 for $250, it needs the ripper teeth but otherwise it is in really good condition. Does anybody know about this style box? Is it a good buy?

I have been mowing retention ponds on a large piece of commercial property that is undeveloped ,the site work was put in place before the boom ended, but anyway the slopes range from comfortable to tricky especially with the water being 20' or better deep, it can tend to make you nervous,but my...

I Lack knowledge in knowing what grade rod is best to weld crack in my stump jumper.I realize that it is a very hard, high grade steel because of the abuse it takes I have old ac welder ( Lincoln 225) stick welder, can someone reccomend what rod I need for this application?

I have a MX4700 DT it has 370 hours it just started making a hydraulic bypass type noise when I lift the three point hitch all the way to the top The noise is the same as when you lift your FEL to the top and don't release the lever I had a new hydraulic filter so I put it on immediately but it...

I bought a ford flail mower on craig's list for $200 it is a 5' with hammer style knives It had barb wire wrapped all around it and needed servicing real bad and I also had to add a different yoke to be able to attach the drive shaft to my MX 4700 It needs to be painted but it cuts very well I...

I was wondering if there are still a lot of these 1050 4WD out there and how are they holding up?

This grapple is for sale in my area, and the seller don't know what type of grapple it is

I am in the planning stages for adding a grapple with 2 hydraulic cylinders to my MX4700, I priced elec/ hydraulic valve kits and they were outrageous so now I am planning to put the kit together myself I looked on line to find out about what type of hydraulic pump and what the flow was and what...

I have a seal leaking on my mini-ex I am going to remove it and take it for repair,can anyone recommend a good shop to take it to? I live in Keystone Heights Fl which is 40 miles south of Jacksonville and about 30 miles out of Gainesville Fl (GO GATORS !!)