Search results

I have about 600 sf of sod from a trench I needed dug. It's in a pile right now and I plan to go through it to recover as much of the top soil as I can. My question is will the bare sod eventually rot into something useable or should I just dump it over the bank? Thanks

Last fall I had a thread about my missing property pin and the possibility of me moving some of my Arborvitaes. As much as I appreciated the suggestions of not moving them, I thought long and hard and have decided to do it. I was hoping to get it done over the winter, but the amount of snow...

Again.....:D Spent a few hours last night searching/reading all the threads about pallet forks because I have a need for a set ASAP. The bucket clamp on style would suit me fine, but the fork thickness is more than I want. They appear 2-3" and I recall a set or 2 that listed that # for a spec...

Last fall, just after Sandy blew through, I placed an order for a Honda EM6500 generator. At the time I had no intentions in paying THAT much for a generator, but the 18 month/0% promo from Honda was enough to entice me. Honda offered the promo through a 3rd party...Wells Fargo. I have a signed...

5 years ago I paid for a property line survey so I could continue a privacy screen(200 arborvitaes added to the existing 100 already in place) to completely block a problem neighbor. As a result of this survey I gained a several feet of property about 250' in length. Actually the length is...

Considering 'Sandy' is on my doorstep as I type, it's a little late to be out searching :p I kept putting off buying a new one and now I'll probably regret it. Past storm experiences and my rural location makes me think more of WHEN not IF we lose power. Only this time their predicting power...

Greetings everyone! I've started a HUGE project after plenty of research. Yet I still have unanswered questions and hope there might be some here that can help with answering. It involves trimming and thinning a 900' hedge consisting of about 300 Arborvitaes. I should point out that I had zero...

Is there a state or federal statue that prohibits a property owner from discharging water from a curtain drain onto another property he doesn't own? I believe I've seen this in print before but am unable to find it right now. Thanx

Can anyone tell me if a 710 has multiple serial # locations and where they might be located? I found one on the LH side of the machine but the first few digits aren't legible. Thanks edited to add...mayabe I should have posted this in the construction equip section?

Found a good deal on a JD 710 TLB. Is there a site that I can check the serial # to verify its free and clear?

I have a powerwinch model# VR 192 12V 3500# rated load. I'd like to mount it on the 3 Pt of my NH TC24DA to run a 600# roller up and down a steep bank to compact the rotted wood chips.. Not sure of the exact pitch...I can check it tho...but it's too steep to walk. Can't see why I'd have any...

I have a bottle of Bio Kleen that froze out in the garage. I've left other PS products out there with no problems. The MSDS for BK states that it will cryallize below 50* and to warm and mix before using. The bottle froze solid so after it thaws and I mix it, is it still safe to use? Thanks...

Anyone have any experience dealing with this? My 1yr old GSD was recently diagnosed with this EPI deal. It's been about 5 or 6weeks since the symptoms were first noticed, but now that she's getting the enzyme supplement 3X's a day, she's almost 100% herself again...I say almost...because her...

When I hit 'submit' for a PM, all it does is blink? the page and I'm back to where I started. Tried multiple times and same results. This has happened to me before and on a different PC too. Any idea what's up? Thanks Edit...I can receive PM's ok, just doesn't seem to send

Even though I no longer post here at TBN, I felt this post was worth making an exception for...even though it's probably my last. Unfortunately for me, last fall I was put in a very difficult situation regarding my "repaired" TC21D, which was traded in for a new TC24DA that was delivered with a...

About a month ago, I posted a thread about splitting my new tractor to fix a hydro leak. I received the authorization and started the task. Here are a few shots...

What\'s up with this dog... ...and how can I stop it?? Over the years, I've had everything from horses and cows to pigs and chickens roam through my property. Since I am surrounded by farms, this can be expected sometimes and I can deal with that. The problem I have now is a new dog has shown...

Hello again...I haven't been around for a while...no PC. So I had to borrow a fiends laptop again. The question I have, before I split my TC24DA to fix a hydraulic leak, is there anything specific to look for? It has leaked slightly(a drop) since day one. Now with 8 hrs on it, it's worse. I've...

There was a slight twist to my recent post about the problem with my TC21D before I traded it in for the TC24DA... <font color="blue">Fuel knock and white smoke... <font color="black">and I did not mention it for a few reasons. I would have posted a link to the original thread, but I'm not...

I hope I don't get jumped on too much, since I recall reading a few posts about the subject awhile ago. All I need to know is does NH make the cap for the FEL couplers on the tractor side and if so, maybe you have a part # too? My dealer sales guy said a somewhat non-convincing No and the...

I've tried searching and came up with zilch. Anyone know why the front wheel camber for TC series is set on the positive side? My 21 looked odd with as much camber as it had. My new 24DA also is set on the positive side, but is not as noticeable...possibly due the tire size. Could it be...

Over 3 weeks waiting... ...at least I still had my 21 to play with I was told the delay was due to availability of the 914A MMM(rear discharge models are hard to get?) and the dealer being backed up with other deliveries. However, I have reason to believe it was ready a week ago, and sitting...

TC24DA, 12LA FEL and 60" MMM....$18,000 TC33DA, 14LA FEL and 72" MMM....$22,500 I just couldn't swallow that xtra $$$ for the 33. As much as I wanted it, I know I made the right choice. The $11,000 for my TC21D, FEL & MMM that I will trade in was not what I was hoping to get for it, but I...

As some of you know, I'm putting in the other half of my new lawn. About 50K sf. It's been a stressful ordeal. Bad enough I had to deal with heavy rain a couple weeks ago. That left quite a mess, besides cutting a 6" deep X 18" wide canal across my steep driveway. Here's a couple of pics of...

rural-ML-511894-ML-

At least for me For starters, my buddy said I could keep his laptop til I get my new one. He also didn't mind if I downloaded 'Irfanview' for pic resizing. I don't like messing with other peoples PC, but he said go for it. So now I'm not shut off from TBN , and I can post some pics too. The...

Can anyone tell me how to use the font color? I'm sure I've used it before, but it doesn't work at this time. Could be operator error Thanks

..on the 2120 I have as a loaner while my TC21D is in for repairs. It gave me one >wild, hair raising, nerve frying< free wheeling ride down hill, in reverse!! Yep, it sure got my attention real quick. I was back blading and stopped just short of the descent on the steep slope. Next thing I...

I am currently working on a deal for a 29, and my dealer has none in stock. He will sell me a 33, which he has a few, for the same price. He stated only a $200 difference. Are they that close in price?

NH 72\" MMM rear discharge I am seriously considering stepping up to a TC29DA or the 33, since my 21 developed a slight problem. I would also like to step up from my current 60" MMM to the 72". Any chance anyone has used a 72" or know of any issues I should be aware of? I mow 2.5 acreas of...

Unfortunately, I unknowingly violated a policy here at TBN. A fellow TBN'r brought to my attention my recent use of improper language, even if misspelled. I picked up that habit at another forum, earlier this year. It is an accepted practice there. Having not been on line in awhile, I didn't...

I have 1543 hrs on this machine now and has been trouble free. About 2-3 weeks ago, it developed an extended cranktime before lighting off. At first, it was only a few seconds, if that. Once it fired, it ran well all day. The last 4 or 5 days it has increased to about 10-15 secs...hot or cold. I...

I've been absent for awhile since my laptop died a few months ago. Hope to get a new one soon, but not soon enough! Probably missed a ton of worthwhile info from TBN, but with winter fast approaching, and the end of 'seat time'... except for plowing...I'll be able to roam the archives. I...

Now that I'm all hooked up with the Gator blades...thanks to the help from a few of you guys ...now I'm interested in the hydraulic top link for the 3 pt. Looks like I need a rear remote too. IIRC, my manual said I can install one. Will the TC21D accept it? Can I buy the complete kit...

Even though I'm still a rookie when it comes to photograpy, now that I have a digital camera and need to practice taking pics, here's a few of my rig

I've heard the term and it appears to apply to a 2 bottom plow, but would someone like to enlighten me as to what it actually is or how it works. Many thanks...

Hi-lift blades for NH 60\" 914A mm rear discharge I've read a couple threads recently about using hi-lift or Gater blades, but am still uncertain as to which to buy, or if they are even worth using. I try to cut my 2.5 acres every 4-5 days, and at times, some areas look shabby due to excess...

Hello All Now that the "very strange problem" with the skidsteer is solved, thanks to TBN, I'm ready to share my experiences and ask a few questions about my tractor. It's a TC21D with the 7106 fel and the 914A mm finish mower. I live in CT and use this tractor mostly for mowing 2.5...

Hello All So here's the deal...machine is a 68? Mighty Mac model 8A skidsteer/loader with the Orian NHC gas engine. The electric fuel pump has just about died. It's an AC pump, and does run but very weak and won't supply enough fuel to run the tractor, but still will pump some fuel. If you fill...

Hi all, I've been reading this NH forum for a few weeks now, and have really enjoyed it. I own a TC21D and have several questions to post to you guys. But first and most important...I'm trying to help a friend solve a strange problem with his skidsteer, and possibly someone here might have run...