Search results

Im replacing the big right knuckle seal on my 1610D and also adding a speedi-sleeve that Hoye recommends. It started leaking badly when my son was using it for the last month in Florida (he's moving dirt and sand around). The seal and some other internal parts were replaced on both sides about...

My 1610D Japanese parts manual is missing the page marked at the lower right with "N005417", i need a copy. This should be the brake housing assy. I need the part number for the breather tube that is on both the right and left.

1610D - small tube on top of left rear axle casing broke off flush. Is this pressed in or threaded? I assume it is pressed but need to make sure before i thread the stub and try and pull it with a screw. If that is not the best method, what is suggested to remove it?

I need new front lug tires for my 1610D. Found this online: Firestone FARM SERVICE LUG M R-1 5-14 B/4PR - tires-easy.com These are cheaper than the Bridgestone 5-14 on the popular Yanmar parts websites. Are they the same?

I was using my 1610D today moving some dirt (for about an hour) and engine suddenly started making a loud clunking sound at, i think, the rotation rate, accompanied by slightly rougher running, a "miss" like its running on 2 cyls, and later noticed a bit of translucent blue smoke coming out of...

I have a 16' trailer i use to haul my 1610D and other things around. It came with the tractor when i bought it several years ago. It had 2x10 painted pine (not pressure treated) flooring planks that have rotted out since it is out in the weather. I was planning on replacing with 2x10 pressure...

Which Posthole digger for Yanmar 1610D? Leinbach L7200JR or L7200? Looks like the Linebach is in my price range and it will be used only occasionally. From other threads here i have learned that i should buy Lowes replacement bit cutters. The JR is advertised as being for compact tractors. But...

Anybody know anything about the quality of this import tiller? (ebay Item number: 330071212367) eBay: NEW Concept CF 48 HEAVYDUTY Rotary Tiller 1yr WARRANTY (item 330071212367 end time Jan-11-07 10:22:53 PST) Its $200 cheaper than a KingKutter 48 from Tractor Supply. What are pro/con for...

OK - what do youall do to keep a drawbar with hitch ball so the ball is vertical, and doesnt rotate around when im trying to hitch up to a trailer? If not moving a trailer far - i just like to back up, lift, and go without locking the trailer hitch. There is enough tounge weight to hold it on...

Due to back problems, i am thinking about adapting a suspension seat to my 1610D. Im tall so also wouldnt mind if it was a couple inches higher. Tractor Supply has a universal suspension seat but i wasnt able to tell much about it or measure bracketry since they didnt have one out of the box...

Its time to put out some small trees. I have a 1610D with Koyker 80 FEL and box blade. Any tricks or recommendations for adding an implement to dig holes to plant 4 to 6 ft tall balled seedlings without tearing up a big place in the yard? All i can think of is adding a posthole digger and...

Help! Yanmar 1610D: Charge light came on the other day. Batt voltage is about 12.6VDC, running or not running (obviously not charging). All four fuses OK. Checked the alternator – it puts out close to 26V AC at 2000 RPM, 15.6V AC at 800RPM. So I assumed it must be the regulator. I seached the...

Im in the middle of replacing the seals on the right front of my 1610D axle assy (4WD). The axle seal was leaking pretty badly. It had the gelatinous light brown stuff in it (water mixed with diff fluid?). The axle (PN 194158-14100) sealing surface (where the axle seal touches) has three...

New tractor owner. I have a 20HP tractor. Wondering if there is a good 3pt implement to trench for laying sprinkler pipe. Need to go 10"-12" deep on a narrow trench for 1" or smaller PVC. Need to leave loose soil on top not in trench. Soil here is sandy, no rocks, but a few patches of harder...

been doing minor maintenance to my "new" 1610D but about ready to actually use it now. A friend was concerned that there appears to be no shear pin anywhere in the "bush hog" PTO connections. The only weak link i see is a standard bolt that pins the back side of the drive shaft to the gear shaft...