What is the clearance supposed to be between cam gear and seating surface on cam for a K3E?
I had to r & r front cover and plate, but the cam gear won't go on to the point where it was when I pulled it.
Before I pulled the gear, the end of cam stuck out past gear by about .120". Now I can...
Here's a question for those of you who have rebuilt a Farmall.
How important is the lead washer on the connecting rod bolts? Shouldn't the lock washer be sufficient to keep the bolt from coming loose?
And how important is the wire on the main cap bolts?
I'm thinking these only protect the...
My boy has a late '40's M that knocks only after it's warmed up. We do the 'listen through screwdriver' test and I hear the knock above and below the side covers (louder below) on #3.
I'm curious if it might be a wristpin and not the rod bearing? When I pull the plug wire for #3, the knock...
Got a 268 that needs a little work. The knife arms are not identical. So I need a knife arm. Any idea on a good source for used parts? A new one is anywhere from $70 to $90. I'm in the mid Michigan area.
Thanks
Gonna check out an old Co-op. At first check it's sound, but I found the pto had some slop. Any one know if this is a straight forward bearing replacement or do I have to completely tear down the rear end?
Thanks
I posted in General forum, then noticed brand specific. Anyway, my boy was brush hogging and the manual transmission got stuck in gear. It's a Case IH 245 2WD manual trans.
I thought it would be easy enough to just pull the bolts out of the top cover and pop the lid, but the lid won't budge...
10 acres in MI. Just some 4h stuff for the kids (and fun for myself). Little hay, a few sheep, occasional pigs, chickens, a dog, a wife, a boy and a girl. Put 'em all together and you either have chaos or vaudville!
My boy was brush hogging and the manual transmission got stuck in gear. It's a Case IH 245 RWD manual trans.
I thought it would be easy enough to just pull the bolts out of the top cover and pop the lid, but the lid won't budge. Is there a trick to getting the lid off?
Thanks for any advice...