Search results

I have an ATI quick disconnect plate on the front of my loader. One of my pins is broken. I believe it's the same pin used with factory loader. Picked up new pin at dealer. Any ideas to help remove what's left of the old pic would be helpful. Thanks.

Last weekend we had 2+ft of snow. After pulling my tractor out of the garage and making a few passes the right front tire rode off of the rim. It's a 16.5 + 10.5 on a L3710 Kubota. This is the second this tire has done this. I keep the tire pressure as recommended. Should I put tubes in my front...

I have a ton of rusted items I'd like to clean up and was wondering if I can sandblast on a small scale. What would I need? Is there affordable equipment? Who carries this stuff?

My tractor its for weeks at a time 150 miles from home in a garage with a great eastern exposure. I've seen ads on Harbor Freight and Northern Tool for solar panels that put out low wattage power. Has anyone used one of these to build a battery tender to keep a battery charged? I would...

I picked up a load of used curbing to build retaining walls. This is my fourth load the first three I just dumped in piles, today i decided to get neat.

I have a bad driveway, steep and with a curve. It needs to be sanded after it's cleaned up. I'd rather not do it by hand so I've been thinking of a spreader that I can mount in a receiver I welded to my FEL bucket and wire to my electrical system. I don't want junk but $1000 seems a little...

Took these photos last wed thinking of using one for a Christmas card. I've never done a custom card before. Which one the vertical or the horizontal. Thanks for your feedback My wife said " to bad you parked the tractor there " i love her anyway!

Went up to Maine to check on the property. I was unsure as to what I would find. The plow guy called last week and told me he couldn't make it halfway up the driveway because of ice under the snow. Now if the driveway is not clean the propane truck can't deliver, you see where I'm going here...

Installed my chains today L3710 Kubota, not a bad job but it sure tuckered me out. Of course looking at 60 and out of shape didn't help. I have a question, when I bought the chains they told me not to put spring tighteners on the front tires, the chains should float. In the first turn I walked...

Three years ago I bought a slightly used (68 hrs) Kubota L3710,L682 FEL and Woods 7500 BH. In three years I've only put another 20 hrs on it mostly snow removal. The project I bought it for is finally coming up and It's going to get worked moving dirt, rocks, trees etc. My question I've never...

I was inspired by 'sr160009's thread to post some pics of our retirement home. "sr160009" I hope yours goes smoother than mine did. My wife and I have never lived in a house of our own. We've always owned a two apartment house and have always had people walking over our heads. Our goal has...

I 'd like to know other opinions on this. I took this quote from another thread about installing a cup holder. Vic, I'm not singling you out for any reason, it's just that your statement is one I've made for many years. I wouldn't add stuff to my vehicles that required drilling holes in the...

I'm interested in buying an ATV. I've never owned one, I've ridden a few. Use: Work around the house, wife will use for landscaping, moving small trailers My Kubota dealer just took one in trade today and is holding it until saturday AM. 2000 Polaris 500 Magnum with 500 miles, same engine as...

My wife has been after me to move some trees I dropped this spring. I just never got around to it. Well it's like when I leave my clothes hanging around she gets fed up and does it herself.

It belongs to Towmwaster Trailers but there is a lot of generic information. http://www.towmastertrailers.com/towmastertrailers/maintenance.asp

I've decided to weld up a setup to move my trailers around as well as a medium duty boompole. I called my dealer to see if he stocked blanks, I'd heard they sell for about $100. He quoted me $225. Has anyone else bought one ? Which price is correct ?

For my friends who have asked about my house progress. Here are some pics taken on 7.23.06 #1 Outside from front, Deck is going to be under double door. Lower opening is walkout basement #2 Is looking down into the living room from second floor. Living room is open to roof #3 View from deck...

I have a Kubota L3710, Woods 7500BH I also have two piles of rocks to move and landscape with. I've read some threads on thumbs and searched the internet I've found some for $600 and some for $300, There must be a difference. I'd like to hear from TBNers who have thumbs. What should I look for...

My friend has an L35 stuck in 9th gear. This is how he got there he was working in a muddy area and wanted to clean out his tires. He lifted the machine up by the bucket and outriggers so he could spin the tires. when he put the machine back down he couldn't get it out of high gear. Anyone have...

Harbor Freight has a $99.95 saw chain sharpener on sale for $29.95. I am aware HB's tools are medium quality at best but for my needs this may serve the purpose. Does anyone out there have experience with these units. http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93213

Pictures taken between 3 & 6 PM

These are photos I took this morning on the river We've had 9 to twelve inches of rain in the last 36 hrs.

When I first joined TBN I saw this thread for a personal lift. I kept two pics but didn't know how to save the thread at the time. I've spent probably ten hours over the last two weeks trying to find it with no success. Here are the photos I kept. I'd appreciate any help in finding this thread...

I'm looking for a thumb for a cat escavator can anybody help me?

I\'m looking for more good brands I had an experience this weekend that got me to thinking about the products I buy. While cleaning my neighbor's driveway this past snowstorm my snowblower brokedown ( no good deed goes unpunished ) It would no longer stay in gear. I also got my first flat at...

I'm getting to old for this, I love living in New England, for the scenery, the beaches, the mountains, the seafood etc. but when I woke up this AM and it was down to 5 degrees after being 50 a little more than a day earlier and they/re talking back up to 50 on wednesday. Ya gotta love it...

Im testing the resizing site on this photo I took on a bike trip I took this summer to Gettysburg PA. well here goes

I am very concerned about what can happen with aging deisel fuel. My Kubota has been sitting all summer with the same fuel from last year I've read about gelling, algae forming clumps and clogging filters and lines and other evil things that can mess up my tractor, while looking for info I ran...

Wanted! Oklahoma parking place My wife and I are returning to OK in Sept. to attend the state fair as well as look for land in the eastern/northeastern part of the state for retirement. On this trip Sept 14-21 I would like to tow our motorcycles to take a three or four day bike trip. I was...

I just bought a tiltmeter and was wondering where some of you that have one have mounted them.

I had originally thought of this idea to hold my chains, but either I wasn't thinking straight or went overboard on the chains 16' 3/8. There's no way my chains will fit in these. I put them on anyway. I'll use them for tools or first aid kit or maybe even my lunch. I'm still happy with the idea.

It's nothing fancy but it does the job, mainly I wanted to try out the camera.

I'm trying to learn how to post a good size photo. My wife took this during this winter's 28" storm. I don't exactly know what she did but I kinda like it in an "artsy" kind of way.

I had my dealer check for a price on a woods toothbar I have a Woods HD 72" bucket with bolt on edge. Dealer parts man says $499.00 + shipping for a woods HD? toothbar I only need it for one season ( new house lot ). Markham won't fit with a bolt on edge. I'm just concerned with having to send...

Hi All, I have an L3710 with a woods heavy duty bucket and bolt on cutting edge, I want to buy a toothbar before spring but most sites I've been to (eg Markham) say theirs won't work with the bolt on edge. Does anyone out there have a bolt on edge with a toothbar. I don't weld and would prefer...

Got about 6 to 8 " last night went out to clean this AM, after about an hour my Toro quit. To give credit where its due the snowblower is 17 years old has never given me a problem, all I've ever done is change oil and replaced the plug once. I had no intention of taking out the new tractor...

This Thanksgiving morning I am thankful for finding TBN and all its fine members. You have been a great help to me this year in choosing & buying my first Tractor. The ideas I have found on this site has made this major undertaking a lot easier for this newbie. I send a New England Thanksgiving...

Recently bought a used 2002 L3710 with a woods 7500 BH, being it's my first tractor there are a few things I did not notice, one was 5-6 inches of ground clearance under the backhoe subframe. Of course it gave me no problems on the dealer's smooth test area. When I brought it up to my land I...

I've just bought a used L3710 and needed a trailer. having gone over budget on the tractor I bought one private sale 10,000 GVW 16' for $1500. Being new at this I came to realize the trailer was a 7000 GVW with a 10,000 lb coupler. Trying to make the best of it I put new load range D tires, then...

I just installed two 55watt halogens on my canopy. After reading more posts than I can remember I thought I was ready, BUT, 12 ga from battery to 12 volt 30 amp relay, off of relay (clearly marked) I get 1post to switch, 2 posts to load, 1 post to ground. From relay I cut the two load wires and...

This may sound like a very dumb question but I have a Woods 750 Bh on an L3710 Kubota. The first night I got it home I parked it and the next morning the BH bucket was on the ground. Isit supposed to stay in place when shut off or was I supposed to lock it before I shut it off.