Search results

Update below : Curious, any anybody else had issues they’re not getting resolved, I pre-ordered a full-size skid steer to mini skid steer adapter plate from Titan, the prom I have is with the pin spacing, one pin is welded further rearwards snd the top mounting edge has a bow to it, the person...

Don't know if anybody else has ran into this, the belly mower on my XJ are really pissing me off dragging and not returning to center very well, I've tried lowering the front wheels one notch to apply more pressure to them but that does not help, 3 point is down all the way, any thoughts...

I'm wondering if anyone is running rear wheel spacers with a belly mower? If so what size are You running? Photos appreciated, I have a hilly property and the tires will be loaded

I picked up a B7500 with a collection system but I dont have books or find a Model number It looks complete but I cant figure out how it mounts, There are no extra brackets on the tractor and their is only a square bracket coming off of the frame work with 2 horizontal holes. Im guessing there...

Im looking for feedback on the Mid mount mower for the "R" series Montana tractors if anyone has any - Thanks

Here is a little Montana info - They must be a financially strong Company and to be able to run Montana and possibly buy out Farmtrac Here is a Press Release March 6, 2008 SPRINGDALE, Arkansas - Montana Tractors announced today that members of...

Today I wont to go to montana's website and wow.. They did a great job with the website. If you want to check it out Montana Tractors: Tractor Manufacturer Has Compact & Utility Tractors, Mowers & Attachments.

I some one could help out Id greatly appreachiate it, Im lookung for a wiring diagrahm for the Kawasaki motor or for a charging circuit for a Mule 550. Its driving me bonkers trying to figure it out without one

Dont know if anyone can steer me to where I can locate a key to a Yanmar 1600d 2 cyl tractor? If not Ill install an aftermarket switch which I have instock-Thanks

Looking for a fuel cap for a Hitachi EX30UR. I was wondering if anyone knew which one of the Deere models would have the same fuel cap. I am told that Hitachi makes the excavators for Deere. Thanks in advance

Montana had a very impressive booth at the National farm show in Louisville KY, Ill try to post some photo's. New loaders had skid steer q. attach option, Nice smooth loader valving, Just recieved a new load last week

Im tried everything when uploading a small photo ,I had no problem this AM this is the error message " Problem running JPEGTRAN: "/usr/bin/jpegtran" -copy none /home/tractorb/htdocs/photos/data/525/1384tym700cabcoastal.jpg Error Code: 2 "

I saw a pretty impressive booth at the National farm show,Looks like a nice solid modern product, Looks like they have a winner here

Montana\'s looking to spend some cabbage Here is some more news from Montana </font><font color="blue" class="small">( Montana Tractors has also entered into a letter of intent to purchase a minority stake in Beaver Creek Holdings, LLC which holds 51% of Farmtrac stock. The agreement...

</font><font color="blue" class="small">( Montana Tractors Announces Land Purchase to Increase U.S. Distribution "Springdale, AR -----Montana Tractors has announced its acquisition of 80 acres of land in Tarboro, North Carolina. This purchase further develops Montana's strategic plan for...

A few photo,s of the undercarrage on the Montana 3840 4x4 tractor

Tractor browsing at it\'s best - Louisville KY Thought I'd mention that the 40th National Farm Show in Louisville KY - Feb 16th - Feb 19th 300,000 average attendance,over 800 exibitors 40th National Farm Machinery Show - Great show,Ive been going for 5 years and counting " The 2005 National...

Looking to see which mfg carry a loader that will mount up to a Yanmar 155,Didnt see anything with Woods and Koyker only lists the Grey's.Thanks n advance

Photo of 2535 Century with a 9\' hoe (C86) I reposted this topic using TBN's photo service which is more reliable.This photo is with the new subframe which allows the C86 to be mounted on the smaller framed Centurys with a C50 loader

ZETOR/CENTURY C SYSTEM LOADER \"NEW Q.MOUNT SYSTEM\" This is the first on the lot so I thought that Id share it with everybody plus it is a great plug- right ?? Theise are only available on a C50HL for now unless the pin on mounting is swapped over to a C50 from a C50HL . The photo is how it...

Photo of 2535 Century with a 9\' hoe Thought that Id post a new special ordered Century 2535 with the larger C86 backhoe http://images.andale.com/f2/120/101/4597564/1091901908309_81904_007.jpg

I thought that I woulod mention that I have one left in the factory shipping crate it is a JM284LE w/shuttle shift first come first served please email me at ob1kubota@yahoo.com

Yes I am a dealer so im alittle biased but I just recieved my first dilivery of the Tafe compact tractors,Nice machine for the money,They are mfg. by LG in Korea,they all have 4 cylinder mitsubishi diesel engines,the hydro's use eaton pumps,dual remotes are standard as well as draft control and...

I Could not resist posting this photo of some of the invintory at American Jawa in Pa. from a photo that I took while attending the service school.Not ment to be a plug, Just showin off iron !! http://images.andale.com/f2/120/101/4597564/1078478683921_CENTURYZETORSEAOFTRACTORS.jpg

Here is photo of the new backhoe for Century shown mounted on my customers Century 3040

I thought that I would share a photo of the 3rd function hydrailics on a new customers Century 3040 which will have a 73" Woods 4 in 1 bucket compliments of Coastal tractor and Equipment in Ct.

Im trying to fing out what model machine it came off of or what it fits,If you know please pass it on,Thanks in advance

Just looking to see if anyone has came up with a hydraulic filter cross reference yet,The oil filter seems to be a Baldwin B1421

I will have available to those who are mechanically inclined a couple of 304 tractors as well as some 200 series models

Im looking to see what other Bolens models or Iseki Models are the same as the 2104 for the loader mounts-tranks in advance

Looking to see if anybody knows if their is a loader mounting kit available for the bolens 2104 or if anybody knows the Iseki cross reference,thanks in advance

crated 224 and 284\'s in Newengland Anybody interested I do have crated 224 w/ 3 cylinder as well as 284's,In stock and ready to go,I also have a good variety of others on the way ,reasonable shipping rates also

Anybody have or know what loader manufacture makes a loader mount kit to fit a 4043?

Those "green" guys are always pushing their color around,Bet they didnt know that Kukje also makes some of the larger series deere's . C & B will get up in ranking soon enough web page select products then scroll down to the bottom,good placement:))

century-ML-272208-ML-

Just picked a couple of grey's,Got one straightened out ,On this 2340 I cant get the 3 point to raise or lower,It is up all of the way,I have tried the drop rate control,Their are only 2 servos,one for the side link and one to a spare set of remotes,It did have a tiller,I dont see anything that...

I picked up a MF 40 tractor with a MF 32 L8100 loader,gas engine,Big counterweight,No pto or 3 point and it has a hydrostatic tranny,F & R petals,I cant find it in the books,Horsepower,weight and lift capasity?the tractor ID IS 9A I99975 Year?Thanks in advance

Looking to try to get a rough idea on the loader lift capasity on a MF 3165,perkins diesel,large counter weight

I have a Kubota b6000 4x4 with a belly mower for sale @ 3500 or best,dont know if it is grey or not

Help, I need advice on the choice between the ford superduty250 xlt 4x4 auto with a 7.3 power stroke and the chevy silverado 2500HD with the duramax and the allison,I was very impressed with the 5 spd auto and the tow mode which shifts verry agressivly,my concern is the reliability of the...

Looking for help on the age of a 3750,tried 3 books and 2 sites with no reference to the 3750 serial numbers,just the rest of the L series,The first 3 digits are 509_ _,Thanks in advance

Has anyone tried the Century site lately?Ive been trying for some time even through the AMJAWA site with no luck,its a great product,I hope they are doing OK,Anyone have any insite?

Wanted to post a photo of the Avenger 384 with a koyker 160 loader

Any new owners of the new Kubota 4300 dt?seems like a sweet economy tractor,flat platform,plenty of horses,just wanted to hear your coments

Does anyboby have any input on these compact 4x4 machines?They seem to keep building the Dealer network.I took a good look at them at the National show,They look like decient machines,just wanted to know what you guys think

Theirs a nice 3710 hst on ebay for 16k ,Im not sure how to lnk it to the auction,you can proubally search under this idem number 1703679726

This is a deal you cant pass up,selling a new fully assembled JM 224 4X4 Tractor,powersteering,4 way loader,3 point hitch,folding rops,great machine for the money,This machine normally sells for 8995.00,This is a 1 time deal,the first 7500 takes it!!!brand spanking new,parts are readily...

bradco 609 \"good deal\" Any one interested in a clean bradco 609 4 point mounted backhoe?it will dig 9'10",its a hell of alot of hoe fothe money,new it goes for 10500.Ill let this go for 5800.00 Its in very good condition with a 16 or 18 inch bucket

If theirs anyone in New England interested in the 38 Horsepower avenger tractors by DF,They give alot of bang for the buck,4X4,Ags,Rops,diff lock,2 hydralic pumps,powersteering,2 stage clutch,33 live pto horses,They will be sold retail for 12500.00 with a Koyker 160 loader fully assembled and...

I am trying to figure out what number the deere subframe mounted hoe it is?The serial number on the hoe is 01550,it looks bigger than a number 8,it has about a 12 ft reach,did they have a #9 or 10?I just picked up this 4x4 and id like more info on the hoe b4 I sell the TLB.It is a clean...

I am having trouble locating a new or used clean hood for the old style(round headlights)late 70's-early 80's,I can get the new style square headlight hood but I dont know if the hood will fit,If you know any answers to theise quiestions I WOULD APPRECIATE IT-GLENN

Anyone have any pictures that you can email me of a factory colored 7100 or similar?Im going to tear the machine appart to detail and paint up,The previous owner painted several pieces red and I want it factory colors which I beleive is orange/dark blue for early A 80's machine,Anyone know of a...

Can anyone advise me,the steering is firm,a little easier at higher rpm's bot not much,I was told it could be a adjustment on the pressure relief valve,where is it located?once I find it which way do I turn it?please foward me your advice,if you could scan me a diagram I would be greatfull,I...

My 3710 has a folding rops which has a annoying rattle at the hinge point,put on a canopy,the rattle is worse,Any thoughts besides wedging paint sticks in front of the hinge?

Has anyone tried converting a portable"tent garage"?I have a 18x28 with the cover on it which works will for what it is,I was planning on building a real garage in the spring,I went to the "qickshelter"mfg the other day and he wasnt sure of the dead load and snow load,my thought was to have...

CURIOS WHAT A B6200 HYDRO IS WORTH, NEEDING COSMEDICS,NO LOADER,AGS,Im thinking about buying,not shure the average value,thanks again-shifty

anyone know where to find a pto spline adapter from 24 to standard?is a 372 a gray machine,are parts still available?anyone heard of isuzue tractors?I believe they were made from mitzubishi,Are the parts interchangeble with 17 hp mitsbuishi?anyone know of values 372 4x4,373 2x4?thanks for your...

I just got this 404 runing which had been sitting for a few years at a truck repair shop,runs great,the proublem I need so help with is the clutch,plate,throwout assembley appear stuck,bent the linkage tring,sprayed down the throw out,tried a pipe wrench at piviot point,Im not shure if their is...

I am very interested to find out what other members are paying for insurance coverage on their equipment,I added a ryder to my homeowners policy to cover my 3710hst-FEL approximately 20k in coverage 500.deductable,it upped the policy by 185.00 ish,In compatison to a house at165kcoverage @...

Well after alot of indicesion I chose to get a 3710hstfel w/r4 w/220hrs on her from carver equipment the tractor was delivered,I wasnt going to drive 12 hrs pick it up then drive back,the tractor looks great,I havnt been able to do play with her yet,we only got 1 inch of snow I was hoping for a...

Well After alot of uncertinty I decided on a 3710 hst fel w/r4 tires instead of the 3010 and ags,Is bigger better?The form has steered me that way so thats how I went and who couldnt always use a few extra horsepower?, Carver is suppose to deliver it to me in CT.Buying a machine w/200 hrs site...

Ive SETTLED ON A 3010HST W/481L,I an having trouble deciding on the ags or r4,I dont get into deep mud(well i try not to),mostly gravel,moving fields and digging out in the winter,I do use the loader a bit and ive heard that alot of people in the form are going with the r4,ive also heard people...

I HAVE A JD950 WITH A # 8 BACKHOE WITH ABOUT 50HRS ON IT,CAN I EASILY MODIFY THE JD SUBFRAME TO FIT A L3010HST?CAN I TAP OFF THE LOADER HYDRALICS TO SUPPORT THE BACKHOE?I FELL IN LOVE WITH THE 3010 HST,HAS ANYONE DEALT WITH CAARVER EQUIPMENT B4?$16800.00 FOR A NEW L3010HSTW/LOADER SOUNDS LIKE A...