Search results

First off I have a new emsx20s & a older 2018 emax20hst, it will crank but not start, I tried to compare the two but the new one only has 1 fuel shutoff solenoid, the hst has 2 on the inj pump - why?. Anyway I am trying to bleed the system thur the inj pump but can't find information anywhere...

My TS1910 rims and tires are about shot, I see some similar used wheel/tires for sale on craigslist and other ads. They all come off something else like Kubota, Jinma or anything but Iseki. Im thinking they may fit, so does anyone know the actual bolt pattern for the 1910/1610 or if any other...

Anyone know what type of oil filter the imt539 uses, it's a licensed copy of a mf35 /152 perkins deisel.

Looking at the dipstick the oil looks like a heavy transmission type, not the thin hydraulic fluid type most newer tractors use. Does anyone know the correct fluid for the Trans/hyd. Also does anyone know if any other brand tractor rims will bolt up to the Iseki rears?

Bought a MF35 gas with multipower, don't have a SN # tag so does anyone what year they added multipower to 35's, all I have read on forums says 35's with multipower years should have dual stage clutch [ live power and live lift and diff lock ] but lift isn't live, no diff lock, not sure about...

Need a starter for imt539, mf35 clone, plenty of cheap new mf35 starters on the internet but not sure if they fit imt, there are no MF dealers around here to compare the starters, does anyone know they will interchange?

I have 2 import tractors that need info, manuals and maybe parts. The imt539 looks identical to my mf35 gaser except for the 3 cyl diesel and the Tafe 25di I know was made in India. Some say the 25di was a Massey Ferguson clone but I can't cross it over to any MF model or motor, the internet...

I got a Farmpro 2420 from my brothers estate, or that's what is says on the hood, when I look this model up is says 1.2L 2 cyl but this one has a (YT380L) 3 cylinder diesel. Someone said they were actually a Jinma 200 but when I looked it up the tractor specs said the same thing (2cyl). I cant...

I got a old mf35 gasser just to bushog with. I don't have a over run clutch for the bushog, mf35 has multipower and I know high locks in the motor with engine braking but free wheels in low so would it be better to bushog in low or high?

I looked at a MF35 today, everything looked good but the multipower lever was stuck in down position, tractor ran good but no engine braking going down hill. The guy said it would work but took alot of effort to pull the lever up into high. Is this a indication the multipower is going bad...

Any one own on of these, Neighbor passed away and had Farm pro 2420 and a Tafe 25DI both 1 owner, both will be for sale soon. I have alittle about the Farm Pro but nothing about the Tafe?

Neighbor passed away and his 1 owner Farm pro in good condition is coming up for sale soon, don't know alot about it other than he bought it new and used it with a 5 foot finish mower to mow his 2-3 acre yard. I need a value quick, also anything I need to look at, if I get the chance.

I have a old grey market 1500 - L175 clone setting in the field with steering box broke. Is there a Kubota junk yard anywhere? Has anyone had any luck repairing one? For years mine needed 1 turn either way till the wheels started turning, then one day it just quit steering and turn freely...

I have a 8yr old Troybilt 17hp mower built by MTD. It has what they call autodrive, the transaxle is starting to make a noise and I can't find any place to check or add fluid. Lifting up the seat only exposes a battery box, everything else is covered by the large pressed sheet metal that covers...

I mow about 6 acres a year just to have a place for my grandsons to ride, play ect. I was thinking of haying it for my goats to eat during winter months. I don't have a bailer, just a bush hog with the back open and a old rake converted to 3pt, I do have a front end loader and was thinking of...

I need to build a set of forks to fit my skidsteer bucket, I only need them several times a year to move around 500lbs of stuff. Cleaning up area of old riding mowers,atv's and motorcycles. I have a set pf old forklift forks but my bucket is deep and they are short, so they don't stick out...

I bought my 1st skidsteer last year and recently tried to unmount the quick release bucket with no luck. I never had a quick release mount before so I need some tips, I tried beating the levers with a sledge hammer, one lever moved easy but the other won't move at all. I know they work...

I bought a TS 1910 last year for my wife to use, she didn't think much of the idea. I have used the little tractor and like it alot but I get my shoes (13 EEE) stuck trying to get on and off, there just isn't enough room for the driver. Has anyone ever tried to relocate any of the pedals...

My L1500 always had a lot of play in either direction, then today it quit turning, like something broke. after turning the steering wheels several times to, it stops the right it would turn a little but you can turn it 10 turns to left and it stops. Anyone ever had the steering box off or had...

Anyone ever take the play out of the steering box on a L1500/L175 Kubota, mine has about a half turn before the pitman arms start to move, I only gave 1K for it and don't want to spend 500 on just a steering box.