Search results

Can't remember using the H gear in my L3400 before a few days ago. Noticed going up the driveway the tractor would nearly stop and the pressure on the pedal would drop. Then it would build up power and keep going. Thought I would ask if this was normal before calling the dealer?

If there is a thread out there already please let me know. My L3400 only has 100 hours and is less than a year old and paint is wearing off in several places. It's worse around the steps and floor but is even coming off where I hold onto the fender. The paint on my old 2200 was in good shape...

I have a new L3400 with about 20 hours on it. I can't tell if the fluid level is correct in the sight glass. Hard to tell if it's full or empty. Any other way to check the fluid level? I added a quart of fluid with not change. Don't want to add more if it's already full.

Is it necessary to depress the clutch pedal before engaging the the 4WD on a L3400 HST? Second question is can you take the tractor in or out of 4WD while moving? I always stopped with my BX but was not sure. Thanks

I had to replace the two front hydraulic hoses and can稚 remember how the bracket that holds the hoses to the frame went on. If someone could describe or even better post a picture of the bracket installed it would be appreciated. The bracket is on the left side if your sitting on the seat and...

After noticing a stream of hydraulic fluid coming out of the 2200 this morning I turned it off and checked the fluid which still showed some on the dip stick. By the time I moved it a couple of hundred feet to the garage the stick was dry and there was fluid everywhere. I filled it back up...

I loosened and removed the wrong plug while changing the hydraulic fluid on my BX 2200. I removed the plug right next to the filter. Problem is a spring and ball bearing came out. I put the bearing on top of the spring and stuck it back in and put the plug back. Does anyone know if I could...

I picked up some filters and fluids to service my BX with over the holiday. Did not look at my records because I knew it had been some time since I had last changed fluids and filters other than oil. It's been almost two years since I've changed the hydraulic fluid and filter but I've only put...

My kids have a history question to research tonight and so far we do not have a definitive answer. The question is: Why and when did JD change their color to green? Thanks for the help.

I thought it would be easy to change the tires on my BX from turf to Bar Tires. The local Kubota dealer does not carry any tires and I've not heard back from several tire companies. I'm worried about buying on the web for the fear of the tires not fitting or hitting the MMM. Does anyone know...

Cleaned up my small garden today with a center plow to start getting it ready for some fall plants and next spring. Maybe a turning plow would work better but I've not seen one that looked like it would work on the 2200. Now the garden needs to be finished out and since I don't have a disc or...

I always turn my BX off when I disconnect and reconnect the lines when taking the loader off. Is this necessary? I did not get a manual for the loader when I purchased the BX.

Is there anywhere on a BX 2200 that shows the model year? Second question is a little tougher for me to ask since my mechanical skills are not so good. There is a rubber boot on the bar that connects the wheel to the power steering on the front of the BX. They are cracked on both sides of my...

Metal chips in trans strainer what\'s normal? While servicing my BX 2200 this week end I pulled the transmission strainer out for cleaning. I was surprised at the amount of metal chips on the strainer. There were several (10-20) larger chips, and about the same amount of very small slivers...

I have a BX 2200 with a MMM we us to mow our yard (2acres) with. And we use the FEL for driveway maintenance. I have 20 acres that was leased until recently. We've decided to maintain the 20 acres ourselves for a while. This weekend I loaded the BX up and took it out to mow down several...

Any ideas on how I can hitch a utility trailer to a BX2200? The hole on the back of the tractor is to low to mount a ball on. The trailer jack would drag and the trailer would be too tilted to use. Maybe some way to utilize the three point hitch? I looked at a draw bar this weekend but was...

I'm a fairly new owner of a used BX2200 and have noticed there are noises that change depending on the implement in use. It really gets annoying if you put weight in the FEL or on the lift on the back. It also seems to change when you put the tractor in 4WD. I usually have gravel or dirt in...

I just bought a BX2200 with a MMM and would like to use a rear blade without removing the mower. It says in the manual you can lock the mower in a raised position but the knob on mine will not move past the highest grass setting. Am I missing something? Thanks,

I am looking at an International 454 Saturday does anyone have any advice about what to look for. Also a price range would be nice to know. They are asking $5,900 for the tractor and 6ft brushhog. Thanks

I am looking at a new Kubota belly mower for my B7200. Currently I use a Land Pride finish mower which does a great job but is hard to get around trees and corners. My local dealer wants $1,850.00 for a 54 inch Kubota belly mower installed. We only have one dealer in the area and it would be...

Thanks in advance if you can help with a couple of questions. First do you know where I can find an owner's manual for a Kubota B7200? Next my 7200 has wide turf tires on the rear and front. Are there AG tires designed for these rims, or would I have to look for rims also? If you know a...