Search results

Can't see to find any of the usual suspects of bar tires for ztrs that will fit. 23 10.5 -12 Anybody have any luck?

Any one seen or used a Range Road Chipper...RR415 or RR420? They seem eerily similar to the Woodland Mills Chippers.

Hi all, I purchased a used quick hitch for my B3300. I'm interesting in the mounting of the plate that holds the pin for the rear of the mount. I have two brackets, but the pin looks to align with the bottom of the loader mount...I have found pics for just about every other arrangement...except...

looking for the part number of pby sleeve for jd 8 backhoe. The dealer's parts guy asked me what power beyond was... needless to say he wasn't much help. Thanks, Rob

Hi all, I happen to be an Orange tractor owner that needs a loader. Since my tractor is a vintage 1980s L235dt, I needed to fab my own mounts. I came across a cheap 200cx with 2305 mounts. Could someone measure the outside width of the vertical arms of the mounts and the height to the ground to...

I picked up a used l235 with 400hrs. In looking after the tractor, I changed all the fluids to get a baseline. Prior to changing the fluids (specifically the transmission/hysraulic fluid), the live pto functioned correctly. Now, I can not engage the lever, and if I engage the lever, the clutch...

just because I haven't spent enough time working on my hydraulics this summer, my loader lift cylinder decided to start pouring fluid out of it. I ordered the rebuild kit from koyker, and will pull the cylinder apart tomorrow. Are their any trick or tips anyone can suggest to help me along?

I post this in the hydraulics thread, but thought some Yanmar-centric ideas might help. Arrgh, three point hitch lifting no weight

As you may have seen, I have added a set of rear remotes to my 1602D yanmar and everything has been tested; loader, 3pt hitch and remotes without any problems. Symptoms: Today, I was finally getting to moving some earth with my box blade, everything worked well raised/lower 3pt hitch on...

I am looking at fabbing power assist for my Yanmar using the valve from a 400 lawn tractor or 950 (AM35449). I can see parts of the assembly of the valve and cylinder on JDparts, but could not find exactly how they fit on the tractor. Does anyone have pictures of the power assist on either of...

Does anyone have power assist steering or power steering on their Yanmars? If so, could you post pictures of the valve and the cylinder positioning? I want to add it to my 1602D, i've seen the kits available as retrofit, but I was hoping to fab my own to save some $$$. Thanks, Rob

I have a 1602D that has a loader installed as most grey markets by cutting into the high pressure line. I wanted to add rear remotes to add a hydraulic top link and a hydraulic cylinder to raise my sickle mower into transport to get around some obstacles... After reading the threads of...

I'm looking to finally get my remote hydraulics installed on my Yanmar, and need to finalize a valve. I have access to a Eaton 31920-CCW. Will this Valve do the trick? Here is a general PDF on the series of valves and a pdf of the info the valve itself. Eaton Control Valve 31920 CCW Specific...

I happen to have a bunch of sets of the Safeway FF49 series (FF49X-3 to be exact). Are these suitable for using as QD's for a top n tilt? There is a direction arrow on the male fitting (used with a double acting cylinder, the flow is in both directions.....

I want to add a set of rear remotes on my tractor. It has had the pressure line cut for the loader (as most of the grey markets are done) and there is no power beyond sleeve on the loader valve. I was reading many threads, and came across this one...

I think that the JD 755 uses the same 3T75 engine as my 1602D. Does anyone know if I could just use a 755 water pump on my 1602? I don't like having to change the antifreeze ratio for summer and winter use, its just asking for me to make a mistake.

I have a new to me 3pt hitch Case 10 sickle mower, this is my first sickle mower so I want to get the scoop on maintenance and usage. Would anyone happen to have a manual for one of these? I've attached some pictures, I used it cut along a drainage and in one of may fields. I found that I...

I have a Koyker loader on my Yanmar. It has a dinoil joystick to control the loader. Today when I was moving some earth, the loader would not curl and then curled slow. While lowering the loader, the loder decided to go up before going down. Fluids are clean, 3pt lift works fine. I suspect that...

I don't generally use my tractor during the winter months, but the fellow who cleans my driveway is missing in action. I went to start my tractor yesterday, and after cycling the thermostart, it turned over but didn't quite start. I stopped cranking it for a couple of minutes and when I went to...

Hi there, I have a grid of four warning lights on my tractor. The top left light came on while mowing, so i shut it down. Any ideas? Thanks, Rob

As the title says, I have an older Yanmar 1602D, which has the same engine as the 755, and I would like to add a front PTO (which I'm going to have to build). It would be a big help if any has (or can take) some pictures of the front PTO (from the motor out) on their 755. Thanks, Rob

Hi there, I'm looking for details on a Yanmar TC550k 2 row combine. Does anyone have any idea where to dig up the engine hp and other details? Thanks, Rob

I have just completed converting my Suzuki Carry mini truck into a dump truck. I have a double acting power pack to move the cylinder both up and down, and would like to add a selector valve (?) to allow me to use the power pack to lift a snow plow (and possibly angle). Ideally, I would like to...

Does anyone on here have one of these? How does the articulating rears work out? Can you traverse any amount of water? i.e. is the CVT enclosed, or wide open like the Gators? Any problems, concerns,....? I'm looking at a low hour used one to use around my 57acres, but I have one wet ditch...

Would someone be able to point me in the right direction to build or (ideally)purchase the kit to add front PTO to my 1602D?

Hi All, Does anyone know where I can get a ROPS for my 1602D? It seems to be missing from all the sites selling aftermarket ROPS for the Yanmars. thanks in advance, Rob

Hi All, I have a drainage problem in my yard. I have 57 acres on which my house resides in the corner of my yard, there is a particularly low area that during this time of the year is about 50 feet across and 60 feet wide and up to 30 inches deep. My yard and my pasture (about 80 feet from my...

I was putting away my landscape rake, post hole digger,.... for the winter and the rake spun on the chain and cracked my grill. Where would be the best spot to find a replacement?

Hi all, I am in the process of replacing the toplink brackets that attach to the back of my 1602D. I removed the bolts, but they were SAE (3/8), I suspect they must have been M10-1.5 or something. Does anybody know what they are supposed to be? I would like to fix the thread (as they are in...

Hydraulic help please \"pilot operated check valve\" Hi All, I think I am interested in a "pilot operated check valve" in my control valve (so I can use std. cylinders in my toplink without movement). I am looking at some of the Prince models (at the surplus center), and can't figure out which...

Finally, I\'ve turfs : ) I have a Yanmar 1602D that had AGs, and I wanted to get turfs on it. Last year I purchased a set of these tires on ebay for the rear. I finally got the adpater plate to convert the bolt patterns from JD to Yanmar. I mounted them last night and re-checked the RCI to...

Hi all, Could someone with a JD 4300 tell me the bolt circle and pilot hole for your front rim? The 14x6 rims look like they are perfect for my Yanmar tractor, but I can't seem to be able to check the bolt cirlce and pilot size. Thanks in advance, Rob

Yanmar folks can you take a look at the following post Front tires and post answers over there? Thanks for the help Rob

Hi all, There must be some experts on here. I have 20HP Yanmar, dry weight about 1500lbs+500lbs for the loader +the loader will pick up ~1000lbs max. I want to put turfs on the front, the rims that I have available are 14"x5" or 14"x6". The turfs I'm looking at are the diamond tread 6-14...

Hi guys, I have a 1602D, and want to remove the large housing that holds the lower pin for a two point tiller. Are there any issues with removing this housing, as my lower 3-point lift arms hit it. I tried to search on this but didn't come up with anything. Cheers, Rob

I have inherited a Century AC/DC stick welder similar to this. It however has no cables or manuals,.... How can I get started? Where can I get a manual, or cables,....? I think Century has been bought out by Lincoln, but can't seem to find the info there. The other difficulty I have, is that I...

Hi All, I've finally got around to doing the RCI measurements for my 1602D. 98 inches rear and 62 inches front. I have also managed to get some wheel adapters made to fit these tires similar to Bama's adapters, RCI of 114. So doing the math, I need front tires with RCI of 72. This means that I...

Post Hole digger won\'t go deep enough??? I have a Worksaver posthole digger and due to the geometry of my Yanmar 1602D, I can only dig a hole about 36"deep. I took a look at setup, there appears to be a couple of different solutions. 1. Build a new plate(s) to hold the top link to the tractor...

Howdy, Does anybody have an idea where to convieniently purchase a sub-soiler, middle buster or combo in Canada, preferably Ontario? I don't have a TSC too close, but they don't seem to have the selection that the US counterpart does. Any ideas? thanks, Rob

Hi guys, I have a 22hp Yanmar, and would like to add a rotary cutter to it to cut (mostly pasture) additional areas around my yard. I have a a ZTR for my lawn, but don't want to use it in these areas (ground is uneven, tall grass). I am looking for an economical (new or used) brush cutter. Can I...

Hi All, Can anyone give me some feedback on the 413? I have a 20HP Yanmar (sorry guys : )) as well as a ZTR to do my grass cutting. I want to use the 413 to cut the thick pasture grass that surrounds my lawn area. What do you think? I don't have many trees (saplings) to cut down, or forest to...

Hi again, I recently picked up a great 1602D and so far it's perfect. One thing I don't like about it is the way the anti-sway chains were put on (poor quality, pretty much parallel to the sway arms). I want to change these, but I thought I'd ask a few of you with similar tractors to show how...

Hi all, On some board, somewhere, I came across a link of someone that had made 2" thick aluminum spacers to mount std. 6" lugs to a 5.5" lug tractor (Yanmar). Has anyone seen this site, or do you know this guy, or or have any experience with doing this? Thanks, Rob

Hi all, I am a Canadian that is quite disillusioned with the dealers and ther use of the US exchange rate. I am looking for a box blade for my 20HP 2000lb (with loader) 4WD Yanmar. I am considering a number of models (FarmKing/Buhler, BushHog, Kioti/Midwest BB20 series) (all with double support...

Hi There, I have found a tractor that I am going to purchase, it is SCUT made in the 80s. In order to bring the tractor in to Canada (and out of the US). US customs is requesting the original title. Does anyone have one of these for their tractor? The customs officer said to go to the DMV and...

Hi all, I'm new around here, I've asked a few questions and have received a lot of great feedback. I finally decide to get a dedicated lawnmower (Kubota ZG23) for my lawn and have been looking for an older Kubota to work around my property. I have found a used L2850 which appears to be in good...

Hi All, Why are more Canadians not bring tractors from the US in to Canada? It seems to me that there is a large discrepancy in pricing between the two, and the duty (for a foreign origin tractor is negligible (Japan ~6.1%). For example a "Turf Special" B7510 is ~$10.3kUS=$13200CDN (with the...

Hi Guys, I'm new here, and would like to get an idea of what a B7510DT with FEL and 60"MMM would be selling for at a dealer north of the border. A price for an HST version of the package would also be sufficient. thanks, Rob

Hi all, I am new to the board on journey to purchase a compact tractor. The other day, I stumbled across a brand new JD 2210 with loader and mower for $15500USD list and $13-14k USD street at a mall in Massena, NY, and I liked the size, it would probably fit both my mowing and loader needs. BTW...