Search results

I know this isnt oficially a tractor but I have a question about my ransoms bobcat front mow. it has a 20 hp onan it broke a rod the only rod I could find is a .030 under new rod for that motor my question is do I order a .030 under rod bearing or a standard bearing or just measure it? also does...

I bought a front mower from a scrapper it had a broke connecting rod. I ordered a new one off of ebay it was new 030 under well does anybody know what bearing I use for the connecting rod and do I have ream or machine the connecting rod ? any help would be greatly appreciated thanks in advance.

I put a carb rebuild kit in and sputters and stalls but if I partly cover the intake it runs good like its starving for fuel the kit had jets and everything it was from moose. does anybody have any Ideas? thanks in advance

I just bought a gravely that wasnt running. I am pretty good on small engines but this 8 hp kohler with aluminum starter housing all the cogs and springs are there but it dont engage does any one have an exploded viewor a clue

My 1983 6.2 litre suburban glow plug relay went out so I put a new one in yesterday it wrked at first and then the light stayede on too long and now it wont click on could something else cause this or should I take it back to napa as it was a lemon.

I just bought a chevy suburban scottsdale 20 6.2 litre diesel it has 8 lugs on rear wheel does anybody know if its 1/2 ton or 3/4 ton.

So I just got back from a small trip to north georgia and just loved all the tractors from yanmars to allis chalmers I stopped at a place to look at some 3pt stuff and met a friend that loves tractors to he gave me a large disc that I am going to weld up the center hole put four legs on it and...

saturday I will get to use my shibaura on a tree job for first time I will have pics then although they might be rough as I will be operating tractror and my dad running the camera. I live on a coastal island off jax fl and the property is on the water that Im working on its wind blown cedars so...

I was going to ride 90 miles to pay 200 $ for a bush hog that needed work then a neighbor gave me this and this big viseand this v8 ford motorand a dryer and ac for scrap and tomorow he has an old mower and mower trailer he is going to give me . the bush hog brand is a hardee panther its a five...

this may be a dumb question but I have a 36hp tractor and am looking at a 5 foot roughcot cutter bush hog style will my tractor handle it?

where should I look for a remote hydrolic out put on my shibaura s1500 fourcylinder or where can I tap into to to .

well the grass is starting to grow and you know that means time to get the mowers in shape/well the gutter arount the deck of the old bx2200 was a lot of rust so I tok the deck off to wire brush then pain as I bought some kubota orange paint at ts and when I got the deck off I found thisso of...

well heres what I started on today

last night I cut up a 30 foot boat to get the motor and trailer for scrap as the trailer was rusted out and the motor was locked up.the motor with part of small trans was hevier than i thought so I had to add ballast to the front I took a large piece of heavy c steel and welded it to some square...

Ok I didnt make it from scratch but it was an old boat trailer rotting in the woods at my pops property . I shortened it added some c alluminum for a floor and sides and welded a spare tire holder on and added some lights that come off of grill trailer that I welded for a neighbor and he wanted...

can weld halfway decent on thick stuff with my toombstone lincoln but today repairing some fenders by welding in some sheet metal Ikept burning through I tried different settings and rods and am wondering should I get one of those wireflux welders from hf for 79$ are they good for thin stuff.

does any body know where to get generic push pull light swich as mine is acting up.

I have a shibaura 4 cylinder that is close to a Ford 2010 what oil filter does it take I cant seem to get any answers about tractor in shibaura section without some body trying to sell me a parts manual well I dont have 80$ for something written in japanese any way Ive looked and its real close...

This is my first project I bought an atv reese sleeve that I bought at hf and welded it on backwards to a I beam and bolted it to my tractor the hole that usualy bolts toan atv is forward so I can pull a garden tractor type trailer/or put a ball on it without reese hitch so now I have 260$ in my...

Thanks for all your help BUT all it took was a prayer . Last night I said lord help me fix my tractor /shibaura s 1500 4 cylinder with injector probs/well I was gone all day went out there this evening and turned the key it cranked right up I ran it for a while turned it off and recranked...

my injector pump only 2 of four outlets produce fuel there is two dipsticks one has dirty fluid the other is empty is it fuel or hydrolic fluid/ is there some orings inside that maybe replaced or can it loose prime/ any info is much appreciated.

I just bought a shibaura that has s1500 on hood on the tag s15d 11494 lem754-11494 28ps 863 then 760426 on the block also on the block is lem754 1484cc any help would be appreciated as i want to buya manual but I dont know wich model I have / also I have one other question I cleaned my...

hey guys obviesly Im new here Me and my pops share kubota bx2200 with loader My boss stores his hinamoto 4wd at my house I have a shibaura s1500? and am currently rebuilding a mf 1953 that had a rod slung through the block for a neighbor.We live on a little over 5 and 3/4 acres.Right now IM try...