Search results

I have been running with the PTO in neutral. I need the PTO and cannot get it to shift to either speed range. The shift lever Only appears to go from 540 to neutral but the PTO shaft turns freely by hand. All suggestions welcomed.

I have a Koyker 140 Loader and The 3point hitch using the tractor Hydraulic pump. I have a PTO pump for my backhoe that came with the backhoe. The tractor supplies plenty of power and I think flow for the Backhoe. What are the negatives in going to the tractor pump with the backhoe also?

Jinma 200 2005 My PTO has stopped driving the hydraulic pump connected to it. I can shift the speed lever 1000/off/540 and see a little movement on the PTO output shaft but no power to the shaft. The pump will turn freely by hand. It was working a few months ago when I used it last. Any suggestions?

DLT 3000 with 20? horse V twin 42 inch deck. Replaced a spindle on the deck, Caught a wire in the yard that wound up between deck and blade breaking an ear off the spindle. Replaced the bearings and shaft on the other spindle. Got all the parts from Amazon.com. Perfect match and way cheaper than...

I have 6 or so trees I want to cut down to thin out my yard. They average 8 inch diameter at the base. Some bigger some smaller. I will use the wood for fire wood. When can I cut to minimize sap in the trees. I live in northwestern Louisiana. We are just getting Fall colors. It will be early...

I need to remove a nut holding a gear on the end of a shaft. the shaft drives a small hydraulic pump. The gear is driven by a gearbox driven by the PTO on my tractor. The gear is about an inch long and 3/4 inch in diameter. The nut is 11/16. I will damage the gear if I grip it with vice grips...

This is the hydraulic fluid recommended for an Italian backhoe I have. From a google search I am guessing it is universal Tractor Fluid UTF. Does anyone have any info?

I have added a swivel and a new base plate for my seat. Now I can stand up swing the seat to the back and control my backhoe from the tractor seat. All I need is a simple locking device to keep the seat still between reversals. The next project is to hard mount the backhoe to the ROPS mount on...

I have several grease zerks that were not masked when the machine was powder coated. Any suggestions on removal. hbaird

I am using 8.3-24 R4 tires I bought new from a local used Yanmar dealer. There is no max pressure rating on the tires. I am running 35psi. Does anyone know what the max pressure might be. Any estimate would help. hbaird

I have simple drop in pin for position control on the lift arms of my 3pth. I would like a screw type like a top hitch. A minimum length of about 12inch and a maximum of 16inch. Anyone know a source? hbaird

Harbor Freight had the Trencher on sale this week for $2499.99. The best deal on a backhoe I have found and fits my budget. It is well constructed. Good welds, lots of steel and the hydraulics don't leak. The 9HP Subaru engine starts on the first crank. The dry weight is 1056LB. After several...

I ended up buying a TSC 22 Ton stand alone, on sale for $996. It took too long to get the 3pt. model in. The 22 ton is almost twice as powerful as the 3pt. on my tractor. First run showed it will split anything I can work into it when vertical. It only goes into the high pressure/ low volume...

I need a bigger log splitter. I have a DR 4 ton rated electric powered splitter that is barely better than useless. It has an up to 8 inch log rating but will fail on some dry 5 inch diameter limbs. I want a machine that will split any 16 inch diameter, 18 inch long, log I can man handle into...

Will all the 2XX series lift the same amount with the 3PTH? There seems to be the same Lift Box in all of them. Harold

I did not completely plug together the QC and tried to start the engine. It did not turn over. Fixed the QC and now the pump is pumping OK. I am watching to see if Hydraulic fluid gets into the engine oil. Will the pump always fail under this situation? Will a rebuild kit fix it? I have a JM...

I had to remove the hydraulic suction line to the pump and add a 35in hose. Do I need to fill the line after I refill the reservoir. The line is filled from the bottom of the tank and sucked to the pump by siphon in normal service. Harold

I just added a Northern Item 4021 filter to my return line. All I know about is it is a "10 micron" filter. I expect it to catch solids bigger than 10 microns. Is it likely to catch water or anything else. Harold

I drained the hydraulic tank, put a 10 micron spin off filter just before the tank inlet banjo, then put in new fluid(10 wt). No leaks. The first few times I raised and lowered the 3PTH, no load, it was smooth at all RPM. After 20 minutes of running and looking for leaks the 3PTH will jerk up...

Has anyone seen or used one? I found the add on Ebay. Uses the 3PTH and regular PTO. BELLY MOWER - 5 Foot - 18 - 30 hp 3 point hitch Tractor - (item 110128355592 end time Aug-15-07 11:00:02 PDT)

I need to buy 6 cylinders for a coming backhoe project. The only, far sure, brand I have found with the size I need is Prince, but the Prince cylinder size I need is not discount retailed in the US. A US supplier has the size I need but I know not about the quality. If I buy one of what I need...

I want to put the same FEL ,A2 ??, on my Jinma 200LE that Zena Importer puts on the D2350 and many others. My tire is size is 4.00-16. The D2350 has 4.00-15 but the rim measured 16in. The front axle assembly look a lot alike, almost like the Jinma is a copy of the D2350. My tire has a max load...

I need higher load rating tires for the front wheels on my tractor. Current rating is 320KG. I would like to double it if possible. Tire size is 4.00-16. No Ply rating given. The wheel have a 4 bolt pattern on 5.5in centers. I will replace the wheels also if needed, and I know I am taking my...

I am looking at buying a loader that has no quick disconnect. It would require removing all but the mount if I need it off. It is a good sturdy made in the USA machine and will save me $750 over all the USA made FEL's I have priced. Is this a problem to most users? Harold

A prince SV sectional control valve catalog page from surplus direct has both serial and parallel spool options. It says I need serial spools for movement of two or more rams at the same time. The serial spools will split the total pressure available between them. Is this the best way to control...

I would like comments on WHOLESALE HYDRAULICS also called Advanced Fluid Power. They are the best priced source for some cylinders I need. Harold

I am going to build a small Backhoe in the Spring. I will need six 2X10 Cylinders and Valves. It will be worked hard when I use it but not a lot of service in an average year. Northern Tool has Lion 2500 Cylinders and Prince Valves at a price I can afford. They also offer a Welded series for...

The Taylor Way 3PHT Back Hoe sold on EBay looks good in print. Does any one know more about them? hbaird

I just found HF sells a Towable Trencher at their Internet Store. It would cost about $3100 delivered. The local store does not stock it. I would like to have a LIGHT DUTY backhoe for ocassional use. I don't need an industrial grade machine and I am able to do and live with repairs. I have not...

Next spring I will have enough yard grass to start cutting with my Jinma 200LE. I can get a good Finish Mower locally. All I think I need for my tractor is to go over to Turf TIres. First do I need to replace front and rear rims? While I may need Ags on the rear from time to time I don't need...

I found and now have lost a reference to a ready made hose to replace the quick disconnect pair. Can anyone help? Harold

I am new to tractors. I know Horsepower is work done over time. I understand Flywheel Horsepower and Rear wheel Horsepower. The former is the work that can be accomplished at the flywheel, IE, before drive train loses. The latter is the work applied to the load after all transmission loses. Most...

My new yard, seeded the end of May, is being torn up by armadillos. They are only out at night so shooting them is out. Has anyone had any success trapping them? I don't care to try poison. Any suggestions. Harold

I have a LM-200LE. My idle is 900 RPM and it limits at 2250 RPM, about the middle of the green band. A 284LE I saw recently revved up to 2800 RPM. I know the Y380 and the Y385 are different engines. I would like to know what other 20X and 22X Jinmas with the Y380 engine top out at. Thanks for...

After half an hour testing I retarded the timing on my JM-200LE a few more degrees. I am now 6 to 8 degrees ahead of the delivered point. The engine is "about" as quiet and smooth as with the delivered timing. It starts cold in 75 degree air in less than 2 seconds. Before it took 3 to 10...

I advanced the Injector timing on my JM-200LE today. Slow starting was the primary motivation. A lack of crispness in running was also a factor. My thanks to Tommy of Tommy's Afordable Tractors for his technical guidance. He suggested moving it in small increments until I got the performance I...

I am clearing about 10 acres of undergrowth around my home. Long term goal is grass and various ground covers under the older trees. I have many bushes and small saplings my Busy Bee Rotary Cutter handles if I bring them down with the nose of the Tractor and run over them with cutter. So far I...

Ease of hook up with Pat\'s Easy Hitch JM200LE 20 hrs. When I first got my Tractor, using a box blade and a rottary cutter was hard and painful. I fought them on and fought them off. Desparate, I studied the finer points of 3PTH use and alignment. I researched various quick hook up devices...

Removed creeper top plate and found only a small pool of oil in the bottom. A message on the C.T.O.A. forum had commented about low oil levels in the creeper and discussed putting a filler place on the housing. While I had mine open I drilled and tapped for an half inch pipe plug in the top...

Jinma JM200LE with 14.5 Hours. I am going to change my transmission oil today. To insure oil in the creeper gearbox I would like to remove the top and put 2 quarts directly into it. Is there any precautions I need to know, or will the top come off and go back on directly? How about the GL4...

I want to remove the FEL Quick disconnect by making new a hose to go straight to the diverter valve. Is this going to cause any problems? Harold

How many have reversed their tractor wheels for greater stability? I have some slopes and would like greater safety. How much wider is the track? What are the disadvantages? Harold

I noticed a little splatter on the right floor board when I got the tractor. I looked and could see no leak. After changing the Hydraulic fluid and the system got hot I had a steady stream of fluid coming from the connection on the diverter valve??? . Found a split in a crush washer on the Banjo...

It looks like a simple job to drain the system, replace with diesel fuel, run while lifting and lowering the 3PT, and cycle the steering. Then drain the system again and clean the filter assembly under the seat. After reassembling the filter I will then refill the filter with fluid. I will...

Hydraulic fluid is blowing out thru the vents in the filler cap. Not a lot and not constantly. I have not had the opportunity to see it happen. I hope to this week end when I can have someone else work the 3pt. up and down. I have tightened up a couple of leaking joints and this is the remaining...

Fuse didn\"t fix it. Bad solenoid??? New fuse got power to the Ignition switch but starter try pegs the Amp Meter. I measure about about 1 Ohm to ground on the output terminal of the solenoid with the starter disconnected. This can't be right. Can the solenoid be disconnected mechanically from...

While putting a box blade on my JM200LE +12VDC was disconnected from the ignition switch. The wiring diagram shows 28. Switch in series between the starter solinoid and the ignition switch. I don't have a clue as to where switch 28 is. Battery is O.K. Can someone please tell me where switch 28...

I tried ph3600, Napa 1516, and Purolator PL20195. They all would start to thread and then bind on the shaft by two or so turns. drained the original filter and reused it. I then ordered 3 original 0707 from JinmaParts.com. If anyone has success with anything else please post it. Hbaird

I did a search on this site and got many numbers and am very confused. Does anyone know for sure what Fram, Wix, NAPA, or Purculator filter will work in my tractor.

I have a Jinma JM200LE. The 3 PT. drops very fast. The manual describes a knob to controll the rate. The only knob I can find is at the base of and in front of the seat. I can't move the knob by hand in either direction. Any help? Also the tractor has a 3cyl engine but the manual shows 2cyl...

Just got a new JM200LE. I paid $3599.00 for the machine. A local trailer sales business tried one container and quit. It was a choice of the 200LE or a JM2000 recon for $3295.00. I feel 3 cyl., power steering, the spring seat and new is better. A few problems so far. The throttle linkage will...