Search results

I came across these photos of a MF240 with the 3pt lift arms that have additional supports that link to the axle. This is probably a noob question but what would these be used for? Does it prevent the lift arms from going up and down? TIA

I ordered two filters from an online supplier. Using their website I located the two filters that should fit my tractor. Wwhen ordering I sent them my serial number to verify fitment. Long story short, the inner filter doesn't fit. The opening is too narrow compared to the one I took out...

I am relatively new to tractors and diesel engines... I bought this MF a few years ago and have only put on ~20 hours. I recently replaced the fuel filter and O-rings on my MF240 and it is still leaking. It drips once every 10-15 seconds. It appears to leak at the top and bottom of the...

Cylinder 25H42433 Seal Kit 90939 I ordered the seal kit from Bush hog to rebuild the cylinder and the larger O-rings are obvious where they go. But I am perplexed on where the smaller O-rings are to be installed. I just now started to disassemble the cylinder any guidance would be appreciated.

Early 90s MF240 power steering I have a 240 with the hydraulic dual cylinder "orchard" steering system. I need to change the fluid. I have read many post that suggest ATF (automatic transmission fluid).... Do I need to use ATF or automotive power steering fluid? Thanks in advance for the...

I am trying to mount a loader to my 240 But I am having some problems with the hydraulics. I can get the bucket to raise but it will not lower. It does not seem to be relieving pressure in the hydraulics. I have the inside lever to constant pump, where should the draft be? The same is...

This document is a little large (~18MB) to download, it should have been scanned at a lower resolution. But I figured I would post it for all those searching the web for an operator's manual. Bush Hog 2400 QT Loader Operator's Manual

I was looking for a headlight bulb for my 1993 Massey Ferguson 240 and was able to find them locally at a auto parts store, they are the same bulbs used on snow mobiles. So I figured I would post the part numbers for others that may be searching as well. Bulb BT Type P45T 12v 45/45W Part# 9589...

Massey 240, around here seem to range between $6000-$9000 46hp Perkins AD3.152 Diesel I can only assume the 150hrs on the meter are after a rebuild.... Everything works and it fires right up. How much is it worth? Any feedback would be appreciated.