I知 looking for a set of 14 rims to use on my Kioti. If anyone in NE Ohio has an extra set they would like to part with let me know. My bolt pattern is 6 on 120mm but I can drill them if need be. I forget my pilot hole diameter but I think it is about 90mm. I値l double check.
As for width...
A friend has a TU180 and he called tonight asking if I could ask around about mechanics in Ohio (NE would be best) that are familiar with Iseki machines.
I told him it's a long shot but I would ask here.
He has a leaking front seal on the engine and he wants to add at least one remote...
Anyone have issues with the hydraulic oil cooler leaking on their CK (25,30,35)? This started in the past couple of weeks and has gotten steadily worse. Now the cooler is plugged up with oil and dirt and I have a decent sized oil spot in the garage.
It appears it's leaking out of the banjo...
Well I finally ponied up and called CCM today. Ordered the top and side link I've been wanting for so long.
The guys down there in TN sure are helpful and patient. They know their stuff too. Mark made sure I understood eveything he was saying and asked the same questions a couple of different...
Anyone know if CCM is buried again? I've emailed them a couple of times and it's been pretty slow (to be fair, I've been slow too).
I'm waiting to hear back from them about estimated price. I'm all ready to pull the trigger on HTL and HSL as soon as they confirm pricing.
I've got a full set of barley used R3's I'm going to sell. I don't know what machine they come off of as I bought them used but I have the mounting dimensions.
Fronts:
Firestone Turf & Field
25x8.50-14
Pilot hole - 4"
Bolt Circle - 6 (12?) lugs on 6"
Rears:
Firestone Turf & Field
Loaded...
I don't know if this has been covered before or not and it's a pretty rare happening but I thought I would share it anyway.
I was mowing our lower field the other day and I had an empty water bottle in the cup holder on my Kioti. I made a turn down hill toward the road. Usually I turn at the...
I recently purchased a GN from my neighbor for a very, very reasonable price. I have very little money in it. Problem is my tow rig is a 3/4 ton Suburban. I was going to convert the gooseneck to a bumper pull but I likely won't have time. The trailer is in very good structural condition both top...
I got to spend some time this week getting ready for winter :rolleyes: I've been hauling downed trees the last couple of weeks and this past week got my hands on a splitter. I'm good for the winter now. All I have to do is stack it.
My dealer has a hydraulic top link available (w/ a DPOCV) and I need a side link as well.
I've checked around and CCM is busy w/ the hay stuff (couple of months) and one other source has them but is including fittings, hoses, and QD's. All of which I don't need and don't want to buy. So far...
My neighbor has a Ford 4000 (not sure of the year) and he told me tonight the three point hitch won't move. Apparently last fall it was moving slow and this spring he and his son added hydraulic fluid but it still won't move.
I don't know too much at this point and the tractor is about 60...
I noticed the other day my while mowing that the fuel gage was not moving. Secretly I was hoping th fuel efficiency was getting better but I knew better.
I checked and the tank was about 1/2 full.
Here's what I know.
- The gage reads full when the sending unit is plugged in and the key...
Here's some pics showing the beginning of the tear down and rebuild I'm in the process of doing on my rear blade. It's a pretty old Rhino LR 500 as near as I can tell. I found the parts manual on-line and measured all the bolts as I tore them off. I'm replacing all the hardware and I'm going to...
While I was doing some brush clearing this weekend I lost two lynch pins out of the lower connecting pins on my KL130 FEL. Anyone else have this problem?
I stopped by TSC this morning and pick up some of the"Safety Locking Pins". The kind that have a large wire lock that slips over the end of...
I got to spendsome quality time with my CK30 today. A good friend is putting in a 20x20 pole barn for his cows, tractors, and implements and needs to level a spot as well as build a road. He's got an Iseki TU180 with no loader so I offered to help him out.
First thing we did was move a brush...
Well I worked well into the night last night digging up the back yard so my CK30 would be sitting at exactly 50 hours on the clock when I got up this morning ;)
I greased all the fittings I could get to (stupid brake levers, see pics) and drained the engine oil, replaced the oil filter and...
I have a set of worklights I'm going to install on my CK30 and I'm looking for a place to tap into the wiring.
Anyone know what the white connector in this picture is used for? Amd just as important, what's on the other end? I haven't had time to really look it over to good yet but I noticed...
Well I FINALLY closed the deal with Jeff (BTI) and picked up my CK30 HST today (well tonight).
I had to deliver my sold Kubota to SE Indiana then drive all the way back to SE Ohio to Jeff's place and then back up to east central Ohio where I live. Wow, 14 hours on the road and almost $300 in...
This one hit close to home. I didn't know the man or his family but it's a pretty small county we live in. It doesn't say if he was wearing his seat belt or not. My guess is he wasn't. If he was this was a real freak accident.
Carrollton Free Press Standard | News | 3/27/08 | Bowerston man...
Anyone know if Kioti will have similar financing like they currently do, later this year? I finally got the okay from the CFO to get a new tractor and I think I have my old grey Kubota sold. I don't know if I can get everything ironed out in 15 days though. Since the promotion ends on the 31st...
I have a newer grey market Kubota, model is GL-21. It's beena great running tractor for almost 2 years now and done everything I've asked of it.
This afternoon I was cruising dow ny driveway to load it up on the trailer to take to a friends so he could use it while I am out of town next week...
I have an '02 K2500 Suburban and a problem anytime I hook a trailer to it. Last winter I was hauling my tractor home from my mom's place, where I just cleaned her driveway, and I started to slide. The trailer was borrowed and did have trailer brakes but I didn't have a controller to operate the...
Anyone ever make a set of adapter plates to put wheels on your tractor that weren't originally designed for it?
I ran across a full set of turf tires w/ Kubota wheels for $113! (Ebay) The lug holes are close to the same size as mine as well as the pilot holes but they don't match up...
A friend of mine has a TU180 and noticed oil leaking from the front axle around the steering knuckles on the floor after sitting for a few days. He took it out and ran it for a while then the power steeing went out. He parked it and this morning we looked at it. The fluid in the power steering...
I have a somewhat newer grey market Kubota and it has what I believe to be a working computer on the 3 point hitch. I say I believe it is working because I have only been able to figure out how to get it to do two things.
I know where to place the knobs and buttons to get it to tilt and then...
The valve stem on the tube for my front tire has developed a crack and it leaks down after about an hour or two.
Does anyone have a tube to fit a Bridgestone Farm Service Lug-M tire, size is 6-14. The tube also says Bridgestone 6-14 on it. If so please let me know, along with price and...
I have GL21, grey Kubota. I'm wanting to switch the tires over to either R-4 or R-3's and I'm probably going to need new wheels.
Can some of you L2800/3400/4400 owners tell me what your lug pattern is, front and rear? Pilot hole also. I would really appreciate it. I'm going to check the axle...
A friend has a New Holland TC29D with a 60" MMM. He is an older gentleman with bad knees and doesn't get around too well right now so I help him out whenever I can.
He called last night and said his MMM isn't cutting right, it is leaving streaks (that is leaving a strip of uncut grass). I...
I have Woods RD6000 finish mower a friend let me borrow and the belt is slipping off. I checked the spring on the idler and it seems good. I'm guessing the mower is 5+ years old but he only used it a handful of times then bought a tractor with a MMM and let this one sit outside for several years...
What\'s this lever on my dash?
Anyone know what this lever is? (PHOTO ATTACHED). It is secured to the steering column by a clamp similar to a hose clamp so it's not designed to move forward and backward. It does move up and down though. It is circled in red in the photo.
I can't seem to get it...
I have a grey 'Bota, not sure if they will make a diff. or not but I thought I should state it.
Anyway, I live on a pretty good sized hill and the front lawn is pretty steep. I generally try to mow up and down but with the rice tires after it rains it doesn't do so well so I go across it. The...
I recently purchased a grey market Kubota that has a "new" Koyker 110 loader on it.
The other day I went to move some dirt from a hillside I've been chipping away at and when I pushed into the pile and went to curl the bucket back it momentarily started to come up and then dropped.
I played...
Well it took less than an hour of run time and I've already broke something on my GL-21
I was playing with the FEL last night, scrapping the drive in some rough spots and decided to do some "off roading" The loader installation was less than perfect and one of the hoses hung down below the...
This is a duplicate of a post in "Grey Market" forum. I was told to post up here and told to post down there. I don't know where to post as I see other owners of grey Kubotas post in bothe forums too.
I'm looking for manuals for a Kubota GL-21.
Best I can tell Serial Number is:
1828
Engine...
I'm looking for manuals for a Kubota GL-21.
Best I can tell Serial Number is:
1828
Engine Data
KO27 K2-D 013-N
On side of engine block "L393" followed by what looks like a lowercase. cursive "L"
Other side of engine block "14"
I'm not 100% sure about the number above. The first letter could...
Standardized \"new used\" tractor check list.
Is there such a thing as a standard checklist to go over when a used tractor is bought? I know it would probably be ideal to take care of that BEFORE it's bought but I just thought of doing something like this. Does anyone know if a...
I'm getting ready to pick up a GL-21 this week from a local importer. I posted down in the Grey Market forum and was told I might want to move it up here as the grey K's are the redheaded stepchildren of the grey world. So here I am.
For those of you who haven't seen any of my posts down in...
Anyone know what kind of tranny the TU205 had? Was it straight gear? The layout of the levers looks very much like my friends TU180 which is straight gear.
Attached is a photo of the one listed in Emporia, VA for sale.
Thanks
Does anyone know if the ROPS off an American market Kubota would fit a Japanese market GL-21? I found a few 'botas that look very similar to the GL-21 but none have any real good pictures of the connection point for the ROPS.
Also, does anyone know where there might be a tractor salvage yard...
I've been trying to track down what the standard dimensions for a 3 point implement are. Does anyone know? I think it's defined in ISO 500-2. Does anyone have the dimensions?
I plan on using Pro/E to design some custom implements as time allows.
TIA for the help.
I found an N209 w/ approx. 900 hours for $5150 and a GL-21 w/ 1127 hours for $6400. I like them both, they are both 4WD, power steering, shuttle shift and both have the hydraulic tilt on the 3PH.
The GL looks to be in much better shape as I believe it is probably newer than the N209 but looks...
Does anyone have any info on this tractor? (Iseki TA262F). Any known problems. Parts availabilty problems? Does it cross to any Massey tractors? I was told any loader that would fit the MF 1240 would fit this.
A local yard has one and says it has power steering, shuttle shift and low hours...
I didn't know where else to post this. I didn't see a forum for technical problems related to the site.
I am trying to reply to the post from EuroYanmar about the US model he showed. Everytime I go into THAT ONE POST I am unable to reply to it. The little tractor symbol next to the Yanmar...
I have another question. While I'm still looking around, waiting for money to appear in my bank account, I see some pretty conflicting information about power steering and which models have it.
Is there a way to tell which ones have it for sure, a list perhaps, or maybe by the model number? I...
Okay, well I am fairly new to this board and tractors in general. I have posted a few times over in another brand’s section as I was originally looking at buying a new tractor. A lot has changed in the past 2-3 months though and after quite a bit of research I think I have decide to buy a...
I am looking at buying a tractor soon, not soon enough, but within the next 3-6 months. I am still wrangling w/ brand, etc... but I need to start looking at financing options. If I buy new which I really hope to do I'm sure it will be easy but I'm not sure who I should apply for credit with or...
Well I am a total newbie to tractors but I have been trying to educate myself here recently as I am about to close on a house w/ 3 acres and a heck of a steep and bumpy driveway. I definitley see the need for a tractor.
I usually try to buy the best I can and do considerable research before I...