Search results

Howdy All, This is a follow up on a 3 gauge cluster installed on BX 25. The task was to mount the temperature probe for a HST temperature sensor. I obtained a new rear PTO cover located at the HST dipstick. A 1/8 NPT hole was tapped into the aluminum housing as shown. Diesel fuel was used as...

After having all the stuff for the better part of a year I finally got around to installing an instrument cluster on the BX 25 hood. I added a volt, Engine oil pressure and transmission Temperature gauge to a pod located on the hood of the tractor. All are electrically operated with the oil...

Howdy All, I got tired of wearing out ramp parts and the noise of just going down the road, So I added a cheapy NAPA shock to the ramp and low and behold quiet!! It is mounted within 3 inches of maximum stroke to provide maximum leverage on the heavy ramp. Finally time to do it with all the...

Howdy All, After crawling around under the BX I decided to dig thru the extra stuff laying around and put a real skid plate under the vitals, 10 days of rain also had something to do with my boredom. The rear skid plate is 1/4 inch plate. It rides against the yoke bolts, It is held on by the...

Howdy all, Cleaning up the garage sometimes means making things out of all the "stuff". That's what has happened here, I made a weight plate on which I can hang many things. It mounts on the backhoe brackets. Right now I just use it for the weights and chain bucket seen. It can accommodate 5...

Howdy All, Over the years I have put battery switches on every piece of equipment or toy that I own. Even though I have never had a problem with a dead battery on the BX, I just had to do it. NAPA $11, an hour of time on a dreary January day with adult beverage in tow is all it took. I...

Howdy All, Used up a some scrap stuff and built Breakaway light Brackets for the BX 25 ROPS, No holes drilled in the ROPS..Used Weld Mount product..Great stuff. The Weld mount studs are amazing, I Used left over 2 part glue to make wire ways for the light cable. Stainless 3/8 Washer with a nut...

Howdy All, I finally got around to building the Pallet fork hitch combo. Pictures are attached. The quick attach forks pictured are 30" long which fits the bill for most of my lifting. Longer "brush" forks are under construction. The hitch is a 2" standard square receiver to take any size...