Search results

Looking to replace my 25 gallon pull behind sprayer with a 25 gallon atv sprayer. Lots of options out there. I think I would like to buy a good grade spot sprayer and make my own boom with 3-4 nozzles and valves that I can shut off one side or the other. Anyone do that? Or does anyone have a 25...

Any idea what kind of snake. Found at Seneca Rocks, WV

I have a 2 story 30x40 pole barn. I insulated the walls with foam board and covered it with osb. I have steps going upstairs that I made a door to close that is on the floor. I just push it up and latch it and do the opposite when I want to keep the heat in the bottom floor. Originally had...

Real long shot here, need a hood for my X500. That **** differential lock will make you try to go places you shouldn’t. Flopped mine over & other than being sore all over, hood seem to take the brunt of it.

Anyone ever replace the water pump on a BX 1870?

I'm having my roof replaced due to a recent hail storm and I am considering adding a roof over our deck. I have an Amish contractor that is quite capable of the build. Problem is I'm not sure how big to make it. I would like to cover the whole deck 12x28 but we are planning on making an...

FH500V is NLA. JD just sells short block. Anyone ever repower with another Kawasaki or other brand engine? Did a lot of searching and phone calls. Not coming up with much.

Anyone know of an aftermarket radiator to replace the JD 108901? JD price is 391.69.

Customer wants more aggressive rear tires. She has Carlisle super turf on now. Does not want chains. Size is 20x10.00-8. Anyone find anything to replace those?

Kohler Command CH14s. ACR not working. Anyone experienced with this repair?

Fellow at work has this tractor at his hunting camp. Trying to get some suggestions for him as to what could be wrong. It's an 8 speed with hi/low range. Bought new in 2002 only has 300 hrs. He locked in differential, put it in low range & let out the clutch and heard a bang. Now he has nothing.

Anyone ever change the brakes on a GT262? Got one coming in that owner says as very little brakes and sounds like metal on metal.

Electric PTO just quit working while mowing. So far I have; removed and tested switch--good checked fuses--good checked seat switch--good checked that 12 volts is present at the PTO switch--good. It doesn't seem that 12 volts is going to the terminal that plugs into the solenoid on the...

Cub Cadet Super LT 1554. Anyone got a used PTO laying around. PN 717-1774B Warner pn 5219-25.

I am working on a JD GT262 that has the tuff torq by Kanzaki transmission. Belt is good and installed correctly. The problem is once you shift into a gear, you can't shift out unless you shut it down. Clutch does nothing more than release tension on the belt. Brake will stop the pulley from...

I'm told this 855 blows the fuse after running the PTO for several minutes. Anybody have this problem before or know where to start looking?

We would like to try to save some of our flower plants ie; ferns, habiscus etc. over the winter. I have an 10X30 unfinished, unheated area that we use for storage under the front porch. It has block walls, plywood floor (decided to use the space after the house was built) & is accesible from the...

Will be working on the above tractor. The leak looks to be on the front axle where the king pin goes through. Anyone have a parts list so that I could see what needs replaced, gasket, seal etc? Just from a quick inspection today, it looks like quite a few things needs to be removed to access the...

I am contemplating buying a "like new" I'm told, 380 blade for my JD 955. It comes with everything including the manual. Fellow even said if I bring the tractor we would put it on, but he's two hrs. away so I'll do it myself if I buy it. My question is, will I be sorry that it is a 54" blade and...

Anyone know if this type of antenna works. I run an overhead crane & would like to try this. ebay item

Is there a site that you can get a free carfax report on a used vehicle? The carfax site charges 24.99.

Saw this site today & thought I would share it.

Sorry, I couldn't resist. I am getting pumped up. I'm tired of all the hype, I'm ready for the game. I get 3 Pittsburgh tv stations & it pretty much has been dominating the morning news. Go 'Stillers', get on the 'Bus' & strike up 'Big Ben'

I use Internet Explorer at work. When I came back today, all the favorites were missing. They were all there friday. No folders, nothing. Found them all to be on a folder on the desktop. I don't know how that happened, there are several others that use this same computer. Is there a way to get...

I sent a PM yesterday (6-21) and later when I looked at 'sent private messages' it should 0 messages. So, I sent the PM again & when I checked this am, it still shows 0 private messages sent. Any ideas?

I would like to add a lean to on my pole barn. The pole barn has metal siding. I would like to add on 16'X30'. I will be buying 16' steel sheets for the roof. What would be a sufficient drop on the roof level? From the bottom of the eaves on the edge of the building is 10'6". I was hoping to...

blades for 72\" mmm Does anyone know what blades are available for 72"mmm? I have the straight ones on now & would like to go to the hi-lift blades if they are available. I noticed that a fellow on the NH forum has switched to the Gator blades. I have several aftermarket sources that I order...

I notice that sometimes I will go to a forum that has say 25 unread posts. I may read 10 of them, then come back the next day & the other 15 posts are marked read too. Why would that be? Many times I will click on a post & find it takes me halfway down the post even tho I didn't read any of the...

Ok, your not going to see pictures of two sexy women building a boat in bathing suits. What I am looking for is a web site that I had found at least a year ago that was about an ongoing boat building project. I think they were from Canada & were building this boat and when finished they were...

I was cutting grass last week with my riding tractor & when I went over (as I have done many times) my water meter lid, it popped up & wedged itself under the deck. Luckily I didn't damage my mower. Had a heck of a time getting it out from underneath the mower. When I did get it out, I noticed...

For some reason, I know longer get an email notice when someone replies to my posts. I thought there used to be a box to check that said 'notify me of replies' or something like that. I don't see it anymore. Is there something I need to do?

Ok, I finally got all the hoses & fittings that I needed to hook up the hydraulic logsplitter that I borrowed from my neighbor to my JD 955. I don't have rear remotes so I traced the two lines that come from the curl cylinder. I hooked the in from logsplitter to the quick connect that went to...

Well, this all started in the computer stalls thread. I decided after reading all the tips to go ahead & download the free zone alarm. About 70% into the download, the screen started flashing & things froze up. I shut down & restarted the computer. I then deleted the zone alarm from my files...

Just returned from the OSU-MIchigan game & couldn't contain my excitement. What a great feeling when your team finishes 13-0 & is going to play for the national championship. If things work out, I will be in heading out west to Tempe to watch the big game. Lets see now, how can I make this a...

Looking to go on vacation end of July/Aug. We were just going to drive the 8 hrs. to Ocean City, Maryland. Looking for beachfront rooms on the boardwalk, rates are out of site, especially for what they have to offer. Wife started searching & found that Cancun has some really nice places that...

Well, I either bent the blade or the spindle on my 72" MMM. I got on top of a low stump that the deck went over & kinda hit pretty good the other day. Today I sharpened the blades & noticed the center is cutting lower. Didn't have alot of time to check things out before coming to work, but the...

I found a toothbar for my JD 955 60" bucket at a friends tractor business. It is 66" long, but I should be able to cut it down & weld it back together to make it fit. He wants 140.00 for it so that would be a pretty good savings for the extra work. On this toothbar the teeth look to be slipped...

Well, we all just took another cut in pay to try to keep our ailing steel company alive. Mgmt. & Union both took a 15% cut in October & now another 12 3/4%. This along with money from W.VA & Ohio & a few others totaling 27 million should keep us in operation until the end of March. Don't know...

How do you make hyperlinks in a message. Not only the ones that are in blue & look like this <font color=blue> www.abcd.com <font color=black> The ones that are blue & say <font color=blue> click here<font color=black>. I figured out how to make them blue, that was a big accomplishment in...

What is my problem? When I click on classified ads, the page opens up & then when I click on an ad, the page that it opens is blank.

OK, now for air compressors. I am in need of a larger one. I have an old 1 hp that I bought new but it is now undersized for my use. Suggestions; single stage, two stage, oiless (I hate the noise of the oiless) ? I use it for a little bit of everything. I do lawn mower repairs as a side hobby...