Search results

And one cost ten dollars....

Get bees Saturday.

Pics follow.

Found this yesterday. Anyone know a easy way to fix this? Does it require buying a new boot? I am certain it is not good and probably is a harbinger of a coming failure.

So it rained all weekend therefore no actions, did not even crank it. Shame. I recently purchased a Smith's trihone and a handheld Smith's sharpening tool. I did however put a lethal edge on a brush axe so I should have a manual implement of destruction on my next trip into the woods.

I have a couple of cars with nitrogen filled tires. One of them was down to 25 lbs after three years. The tire dealer did not do nitrogen and the dealer wanted 20 bucks for a fill up. So I went to a welding gas place and bought a nitrogen B tank and regulator. 240 out the door. Now I have a...

I recently put fender lights on my BX so I could mow essentially at night. I fly each Thursday and by the time I get home its headed into 8 to 8:30, so in order to get her done the lights were the ticket (I want alley lights next but that's a different thread). So this Thursday evening I took...

I am placing this here for a reminder. I installed the fender light kit on the BX this weekend. I did take some pictures and will post those this evening. All in all, took me about three hours start to finish including gathering the tools, breaks (it was hot and humid) and the clean up. I found...

Stopped by the dealer this morning. I am 47.5 hour so I know I need that 50 hour service kit. He tells me he had a returned fender lite kit that he would sell me for cost. I took it. More pictures and updates as I put my first lighting accessory on.

I figured I would fly by and say hello! Catch you on the ground from Dallas!

As spring is coming a tiller attachment for the 3PH has come up in conversation. I have a 2670 and would like to hear What model tiller you are using. Is it a reverse rotation? Does the tractor perform well with it etc. Should I just get a disc harrow and forget about the tiller? Fire away...

Out in the garage last night installing the new PTB. I used a punch and hammer to set a starting point for the hole. Before its over I have a hole off center. Off to the hardware place for a carbide bit for the air grinder. At least its not the weekend.

I ran out of daylight today before I ran out of things to do. I needed to shoot the tractor as well as the other tractor (Its a firebird) before I put them away. But I could not see what I was doing since sundown had came and went. I used some duct tape to attach a 1.00 led flashlight to the...

I got out this this morning with a bush axe and a machette and the tractor. I pulled 14 trees out by the root and dug up two more with the FEL. I cleared a spot about 50' by 50'. Awesome day.

I noticed that the hoses from the valve were leaning over and rubbing the "Kubota" decal. I knew if I did not do something about it I would end up with a nice operation mark on the hood. I used a rubber isolator from a shipping crate used for equipment to solve this problem. I drilled a 3/8 hole...

I have a conundrum. My friend says get a auto bezel from a junk yard and use that. I think I want something more sealed. Under the seat would make a good light for the floor of the operator area. Anyone done this before?

I went over the entire machine yesterday. Even cleaned up the glops that push out at the edges. I had one fitting on the piston that actuates the bucket and one that is in the lower of the passenger side actuator for the arms of the FEL that wont take grease. Is it the zerk? or the nozzle. Seems...

I have a BX2370. It new and is out in the garage covered. I wanted this before I started using the tractor as a tractor.

So for three straight years I have been looking for my roundtuit...I found it this past weekend. I am going to order two, three pound packages of italian bees with the queen for start up in new hives in the spring. Its been thirty years since I had a hive but I am looking forward to the fun...

Hi All, I was raised on a mini farm and then took off to become a college boy after playing in a band for a few years. After 20 years I moved back out to the country. I am a former Microsoft engineer and currently work for Dell as a solutions architect. I specialize in cyber security and hold a...

As it would appear our active season is coming to an end in the South. I wanted to see if anyone here had sprayed bed liner/undercoating on the inside of the mower deck. Like to see what the thoughts were on this topic. Any value in doing this?

I usually like to shorten the service of the first fluids and filters for the first change by half of the recommended amount for NEW equipment. In my mind I am getting the tooling shavings etc out of the system early. So far I have caught some pretty big stuff when I have done this and it...

Anyone thought about a pre-oiler system for the engine. My engine only has 10 hours so I would get a good return. Is it worth it? Is it viable? Anyone done this before? Paul Short, You copy this?

Pulled the old on out and put the new one in. FEL made moving the thing out and in to the house SO much easier!. 20 minute leaf sweep and we were done! That is all. Dan

I got to the 10 hour mark and set out to grease all of the fittings. I have the FEL. But I kept finding a few here or there and it made me wonder. Is there a diagram of the location for ALL of the zerk fittings? Help a busy fella out. Dan

The fella that runs my local kubota dealership is one of the few remaining good guys from the old school. I went by there yesterday because I am waiting on the bagger attachment for my Bx 2370. Yeah, its the hummer of lawn mowers when you use it that way, but it is perfect for preparing beds...

So I am coming up on the first 10 hours on a new tractor. I went and got a pneumatic grease gun for the job. I bought the red high temp grease but I was wondering if anyone is using a different type grease and why?

Where do you purchase the spacers for a Bx2370? Or can you simply make them and have them heat treat hardened?

I got the 60"MMM, bagger, and the FEL....Im looking forward to tomorrow. I can finally get the place in real shape.

Looking for help on which and what. I have test driven the 2670...Nice machine, but more than I need. I have also tested the 1870. Again nice machine but I got the feeling it was going to be under powered. I am considering this purchase for mowing 2 acres of lawn, doing some landscaping/grading...