Search results

I am finally getting around to posting a pic of this last summers project I built to keep some of the weather off our fiver. It is only phase one of the barn with lean-to's cupola and siding to follow. It is 24x42 with 18' eaves and a 10/12 roof pitch.

I am thinking of building an open sided shelter to store our rv and truck under and then enclose in a couple of years does anyone have any experience with perka frames?

Does anybody have any pictures of how they ran hoses to the front of the loader for powering post hole diggers,ect. on a class 3 boomer. I purchased a grapple today and would like to get some ideas of hose routing and so on

Today I went to the ag expo at MSU in lansing michigan and found a booth that sold a quick hitch system that attached to the ends of the lower 3pt arms,looked like a slick system. Attached is a pic and web site. greenwell mfg

My wife and I have started looking at RVs and although first we were looking at travel trailers I have shifted our search towards a fifth wheel. All the units we have looked at have been the light weight styles, 24' with an aluminum framework,ect. so either one could be pulled by my 1/2 ton 4wd...

I saw these advertised in Farm show magazine Mammoth wood products . They look like a good idea if used with common sense.

Am I going nuts or did we once have a feature that would let us do a search of users by name,screen name,tractor make, ect?

Woodcutter\'s train I don't do this when I go into the woods to cut but I thought it would make a neat picture.It actually didn't pull to bad around corners. TC40D with a carry all/trunk combo hooked to a wood splitter my dad and I built hooked to a set of running gear with a 6x10 bed hooked to...

It took a while but I finally finished it. The cylinder and hoses came from a Quality Farm and Country closing sale the link end from my dealer and bought the fittings and couplers new. The block on the tractor end was made by a tool and die freind and the other end welded by a welder...

OK Harv or anybody else, have you ever made any brackets to attach on homemade implements to fit on a standard bobcat style quick attach loader like in the picture?

I have been thinking lately about putting down some sort of dust control on my gravel driveway. Our county has an outfit spray all the dirt roads twice in the summer with what I think is some sort of cloride solution. So I would like to know is it a cloride souution and what is the mix...

This has been this years summer project. It is 24 by28 with a 12 by 28 room upstairs. As I slowly progress I will post more pics.

Last saturday another TBN'er, TAB came over with his L35 and dug the footings for my garage. It worked out great, as he would dig it out I would scoop it up and pile it out of the way.The tractors were together all day and never fought once.

I have been looking for someone that still makes this style of farm light. It is a shade approx. 12"-14" in diameter with a porcelin socket and a threaded hub that will take 1/2 pipe for mounting to a wall or ceiling. Does anyone have any ideas?

I have been looking at/wishing for a dump trailer. The one question I have is on the dump hydralics, the one I am looking at has a 5"x30" cylinder hooked directly from the frame of the trailer to the dump box. Some of the others have a cylinder hooked to a secondary linkage that in turn raise...

I know this has been beat to death but I have another toothbar question. I was talking to my dealer last week an he quoted me a ballpark figure of 245.00 for a woods toothbar. does anybody know about the quality of these?

I finally found a toolbox that is big enough. It started as a carry all from farm & country. I cut a foot off the lower legs and installed a 2” receiver to pull a trailer or wagon. I then made a frame to hold the toolbox also purchased from farm & country and made a small basket in front to hold...

I will be building a garage in the spring, it will not be attached at first but someday maybe. So I want to have a 42" foundation. I would like to do as much as I can myself and am wondering about a wood foundation with cement floor. Can anyone give a point of view?

I have been on TBN for about 2 months and have heard a few of you refer to your tractor with a name such as thor,clemintine,ect. I am just curious what some of you call your pride and joy.

Next summer I will be building a garage and adding a deck to the back of the house.Under the deck will be a walk out basement that I will do some sort of patio. What I would like to do is fence in a small part of the back yard and walk-out for a dog run for our border collie. I know that any...

I would like to get a norwood wood spliter for my tractor but I don't know anything about installing the power beyond option for the hyd. power from the tractor, any help out there. Kevin

I finally found all the stuff I needed to make a guard for the belly of my TC40D. Not to bad to make at all, I started with a piece of diamond plate 48" by 31" by 1/8" thick and added some 3/8" by 6" and 3/8 ' by 2" cross straps for support and for space to clear some stuff toward the rear. To...

It was a nice crisp morning today and I cut a few cotton trees for a guy I work with. The sawmill is a norwood lumbermate 2000 with a 20 horse honda.The shed is a work in progress project that I will finish next spring but at least it will keep the snow off me this winter. The logs were the...

the school I work for has a ford 702A front blade with all the mounting hardware that was taken off a 1710. can anybody give me an idea of what it might be worth?

Well its time, I hope, for a group project. As my TC40D will be spending a lot of time in the michigan woods I can't help but worry about all the exposed equipment under the tractor that is vulnerable to wayward branches and rocks. since I purchased the tractor with a new holland loader (I think...

I traded up to a TC40D a few weeks ago and have received a brochure on their extended service plan. Has anyone else purchased this or looked into it? Is it worth it? What does it cost?