Search results

Saw this at a auction, price was under a thousand, wondering if it would work ok on a front end of tractor, anyone use one of these?

Check this one out.....Ovis Loader Attachments, Machinery & Equipment, Carbondale, IL 62903 - index

I have a 1532 hydro with r4's on it, what size tiller would you recommend a 5ft or 6 ft.....thanks

I have a 1532 hydro with r4's on it, what size tiller would you recommend a 5ft or 6 ft.....thanks

I'm adding a 10 x24 addition to the gable end of this building, with the gable end 24 ft wide. What would be the best way to tie in the new slab? Should I drill through the bottom girt into the existing slab, and put a 2 ft piece of rebar into the holes to tie the 2 slabs together ? Or just pour...

Putting in electrical, and trying to figure how to put the breaker box in. 1 mount it to the purlins or 2 build a stick wall between the post and mount it there Any suggestions or pics would be great

I have a massey 1532 with a tire width of 58 inches. Trying to decide on what tiller size to go with.plan on a king kutter tiller...options are 5ft (60 inches) or the 6 ft (72) inch tiller . The 5 ft would probably cover tire tracks but is that cutting it to close? Not sure if 22hp pto is...

Anyone out here using a quick attatch on their 3pt on a 1500 series tractor

With all the snow we have gotten in the last week here in Kc. and another foot on the way for tomorrow, the faithful 8n that I have used , said enough is enough, I need help. Well help was delivered to day, 1532 fresh off the dealer lot...Been looking for quite some time, at all the colors, and...

Golden Valley Equipment of Clinton Mo has opened another location in Harrisonville, Mo...been pricing a tractor with them over the phone,will check them out next week.

What's the best way to change the fluid..manual is not real explicit...or do you just change the filter...thanks

Found this on craiglist http://kansascity.craigslist.org/grd/2436252883.html

Looking at 3032e and I notice on the spec sheet it says Final Drive-Spur Gear..What exactly is this, and is it any good or bad or a non player...The other color tractors dont mention anything like this on their specs,,Thanks

Do you think a 3032E would be able to pull a 2bt 14" plow. Got a opprotunity to get one very reasonable, but would like to know if you all think the tractor can pull it ok..Not to much clay in soil where Im at...Thanks

I recently went to 2 Jd dealers to get quotes on the following: 3032e Tractor 305 Loader Msrp of the package is 15,379.60 for tractor, 4,214.69 for loader, total for both 19,594.29. Dealer #1 quoted price of 18,227.36...7% off msrp Dealer #2 quoted price of 18,563.00...6% off msrp.. Looking at...

Havent heard to much on the L3200, interested in the model was wondering if there are any owners out there yet? :cool:

Need some advice Need some advice...Im replacing the trusty 8n with the following attatchements..6' box blade, and 5' brush hog..Most of the work would be the usual front loader work ,brush hogging, and garden tilling and some plowing for new garden spots...No need for a mower have a ztr for...

Looking at the various models, narrowing it down to the 2720...My question has to do with the loader hyd lines..I see that they are routed fairly low to the ground from the main frame...Has anyone had issues with the hoses being ripped away or snagging them on ground brush or other foreign...

Well Im on the fence on which color tractor to buy ugh...I need some persuading and I hope you all can help...So why did you buy a Mahindra? and would you do it again?:D You can give me the good the bad and the ugly and Dave forgive me if I opend up a can of worms here.

what a fun day tractor shoppping ok now for a serious question. the 2516 comes with a 48" bucket vs the 60" bucket on the 2816..Same lift capacity on both tractors.. is it possible to put a 60" bucket on the 2516 or are major modifications needed? Like the size of the 2516 but would love the...

looking at a 233 and was just curious for those that take the fel off. what do you do with the hyd lines that are hooked to the machine...Do you just tie them up? I see on the bota the quick disconect are mounted to the frame so no need to tie up the lines...also on a scale of 1-10 10=best how...

excuse my ignorance but a couple basic questions...looking at a 07 2615 gear tractor..is the transmission a shuttle type in these and if so how does it work, also how is the pto operated and contolled? Was searching for ownerns manual to download so I wouldnt have to ask these basic...

I see on the bx25 the 3pt is a option. Whats the price running for the option, and can the bh stay on the tractor with the 3pt installed or is it either bh on and 3pt off? Newbie just trying to figure all this out

has anybody used a full size phd like you would get at tsc? Looking at the 2660 but want to make sure it will work with some of my existing implements with the phd being one of them...Thanks..also list some of the implements and sizes you are using..Thanks again:thumbsup:

Just checking to see if any mahindra owners are here in the show me state...I like the mahindra but it seems like dealers are not very present here in the western side of the state...so im just checking to see if there are very many of us out here

can a b2100 handle a 5' box blade, and a 5' brush hog?

Ok going to replace the 8n with ? I would like some suggestions as to which model I should look at...Probably not going with something new. I would like to use the existing implements that I currently have which are a 5'bb, and a 5'brush hog. Also need a model that can use a belly mower...

wanting to build a carport for the travel trailer. Not wanting a metal one but a wood structure of some sorts. If anyone has a picture of theirs they want to post plz do so..trying to get some ideas...Thanks in MO

looking at a 05 with 600 hrs on it. Just the tractor with no loader or implements. Has r4 tires and hst..was looking at the the other color brands, and just cant get away from orange...Cant seem to find any book values, so i'm gonna rely on the bota proffessionals here to help me...

ok folks need some advice..wanting to attach a lean-to the side of the barn. Question is whats the best way to attach the ledger board to the side of the girt that is covered by metal? Do i need to cut the metal ribs off only where the ledger would be attached, or put spacers behind the...