Search results

I have found a couple threads that describe a leak in the main body of the control valve on a 1533. There seems to be a small hole on the underside that is about 3/16 in diameter and hydraulic fluid started leaking out of it. According to the posts there was a rivet in that location that breaks...

I am going to try to explain the problem without having seen it. My brother was doing some work and after a couple hours noticed a leak. It is coming from the pump near the hydraulic hose connections. He said it looks like a bolt that the head has been sheared off (maybe a 3/16 size?) but it may...

I just used my auger for the first time yesterday. I've had it laying around now for a couple years. Everybody tells me that they won't work in our area because the ground is so hard. I was surprised how well it poked a quick 9" hole 3 feet deep! But, I was having a hard time getting it to drill...

I have a new 1533 with the 1525 loader. It seems that when I am trying to get a load of soil or ? The bucket rolls a few inches either up or down. I seems like there is play in the hyd. cylinders that control loader roll. I'm sure there shouldn't be any play and the loader should remain...

I am happy to have finally receivedy my 1533. I purchased it a couple weeks ago, but there were a couple of issues to deal with so the dealer delivered it the 125 miles. It is a much larger machine than my old Iseki TL2700f. It is strange getting used to the smooth ride and all the features...

I would apprciate any thoughts on a new 1533. I am trading up from an Iseki TL2700F. I have heard that the hydraulics can be an issue with these tractors? Also, is it true that filters and glow plugs are expensive? If any one is familiar with my Iseki, will I be getting much more tractor or...

The 3pt lift on my tl2700f doesn't function correctly. I am sure I am probably missing a couple springs. I can lift it with no problem, but sometimes when it has been in the up possition for a while it won't come down without shocking it. By shocking it I mean to pull up on the 3 pt lever and...

My TL 2700 is suffering from a no start problem. This has been on going since I bought it a month ago. I now know that it is not an air in the lines issue, but it is a glow plug issue. I received three new plugs, one had been tested before leaving the supplier. I put them in my tractor. It fired...

I understand that the lever (bent rod) that is located below the ignition switch on the right hand side of the steering column, is a controll for the 3ph. When you select your operating height with the lever to the right of the seat, you then use the little lever on the steering column to raise...

I am still trying to bleed the lines in my TL 2700f. I have replaced the filter with an in line style filter. I get no air at the set screw that is located near the inlet side of the injector pump. I do, however get air at the injectors. I was told that there is another bleeder on the top of the...

Thanks for the replies to my last post. I think I am fighting a loosing battle when I bleed the fuel system. I finally got the tractor started and it ran great while I was moving the bush hog and blade off of my street (tractor and implements delivered to me last week). I changed the fuel...

I have a TL2700. I need to bleed the air from the fuel system. Where are all the bleeders? There are 2 on the fuel filter housing? One on the side of the pump? Is there one on the top of the pump? Thanks for the help.