Search results

2015 LS xr4036hc problem: electric fuel pump does not operate with ignition in on position, nor after starting. Disconnected the fuel pump and applied 12 volts to the pump with a portable battery and it operates. Checked the power source wire connector and there is power there. I had already...

This looks uber useful. Multi-Purpose Grapple | Danuser

Getting out - Brazilian Construction

After searching the LS parts manual for the LL4102, I cannot find a part number or spec for the grease zerks that are used on the FEL. I've broken 3 trying to get my grease gun off. I've tried loosening the fitting on the gun.

Tie rod broke off while backing up a steep slope with the hog attached. How can I get the casting off the ball joint without tearing up the rubber boot? Heat? Fork? Trying to avoid taking the one side apart in order to put it in a vice and pound it out.

While crossing a fairly steep ravine, to see if I'd be able to cross with the bush hog attached later, I bottomed out pretty badly on my 3 point lift arms that I had left down when I dropped off the bush hog. I heard a loud report, which I shrugged off when it climbed right out. I later found...

While crossing a fairly steep ravine, to see if I'd be able to cross with the bush hog attached later, I bottomed out pretty badly on my 3 point lift arms that I had left down when I dropped off the bush hog. I heard a loud report, which I shrugged off when it climbed right out. I later found...

Thinking of dropping my fuel tank to empty and clean it. xr4046hc with 225 hours. Three weeks ago I got a light indicating water in primary filter and drained it. Light went out right away. That is when my regen problem started. On the next regen, it just stayed in regen for about 6 hours...

Compression. Fuel pressure. Hydraulic pressure. I'll be going out of warranty with less than 300 hours soon, and am wondering what else I should have inspected prior to 2 year warranty expiring. I have a 2015 xr4046hc. Only somewhat common issue I've seen on here is the hubs which seem...

I'd like to thank Gil and his sales and service staff at Kubota Tractor Corporation in Athens Ohio. Besides the killer deal, their staff was professional and helpful and addressing every concern I had promptly. To top it off, the owner is delivering my tractor himself, going way outside his...

I'm hoping this thing is a work horse. Any reviews, comments or comparisons ? Going on an LS XR4036HC

Newbie here. This forum has provided a wealth of information, making the purchase of a used tractor much easier. I found a 2015 LS xr4046hc with 188 hours that had been traded in for a much larger kubota. I drove the 500 mikes to inspect and drive it. The only flaws I could find was a small dent...

Default Checking in Newbie here. This forum has provided a wealth of information, making the purchase of a used tractor much easier. I found a 2015 LS xr4046hc with 188 hours that had been traded in for a much larger kubota. I drove the 500 mikes to inspect and drive it. The only flaws I could...

Newbie here. This forum has provided a wealth of information, making the purchase of a used tractor much easier. I found a 2015 LS xr4046hc with 188 hours that had been traded in for a much larger kubota. I drove the 500 mikes to inspect and drive it. The only flaws I could find was a small...