Search results

I have a BX- 24 and was having a thought on trading up to a BX-23. Can someone talk me out of that ? I have a Curtis cab, skid plates, snowblower.

I have a BX-24 with a 2750 front mount blower..... Is there a replacement available that will fit ? 2nd question: any after market replacement dash boards for the BX-24

I have 3 raised beds in a fenced area with fabric under gravel between the beds. After some neglect weeds are growing in the stone. Last fall they were left to die on their own. Now I have brown weeds on top of the gravel. Anyone have any ideas on either an easy way to remove them or any tools...

Has anyone installed one with the ability to remove quickly and/or easily ?? The cab makes mine a little top heavy.

I have two questions please..... 1 what oil goes into the gearbox 2 does the replacement scrapper bar have a bevel or is it just a piece of flat stock ?

Which one..... inline in a heater hose or in the block ?

What is the biggest snowblower that a BX-24 can handle ?

Any ideas ???? Kubota bx-24 Ran fine for about 4 driveways then it runs very rough barely made it back. I have been using a fuel additive already and just added more even some of the stuff in the red bottle that you use after things gel. Temp gauge read a little lower than normal when...

Hello, Taking a survey / looking for suggestions....... Block Heater or inline heater in the lower radiator hose ???

Is there any difference in the width of turf tires vs R4 or bar tires ?

I have a BX24 with rear wheel spacers. It still feels unstable going across my front yard. Any thoughts how to make it more stable ?

I have about 7 acres, hillside ranch and the front yard is slopped. and would like something to cut grass, blow snow ( have a steep driveway) and do some yard work 9 moving dirt, stone etc. Currently I have a Kubota BX-24 for the snow and yard work. And a JD 318 for grass cutting. Big problem...

Can anyone tell me what front mounted snowblowers are available for a bx tractor ? Thanks

for a BX-24 which is better a Block Heater or an in line heater ? If a block heater which side of the block does it go on ?

When it gets cold enough to use the block heater is there any harm to leaving it plugged in all the time or should I just plug it in just before I am going to start the tractor.

Has anyone heard that Kubota has increased the time for a transmission oil change to 400 hours from 300 ?

With LED Work lights drawing so little current would it be possible to connect them to the headlight wires to turn on and off ?

I have a BX24 with 300 hrs on it. Bought in2007. I can get a BX25 for 11,000 with my tractor in trade. Is it worth it ? I am on the fence. Are there enough changes to make it worthwhile ? Is there a replacement coming out for the BX 25 ? Thanks in advance.

I have a BX2750 and have noticed a change over the years. On the back side of the blower ( behind the auger) there seems to be an increasing build up of snow. When I first got it it stayed clean while blowing snow, but the last year or so the has been a substantial build up. Question: Could the...

I have a BX-24 with a front mounted Snow Blower for a few years. I have noticed that it does not throw the snow as far as it used to. Wet or dry snow.... Also I noticed more snow accumilating in the back of the blower housing ( inside). Do the impeller and augers wear ? giving more clearance. Is...

Hello, I have read that you should not cut grass with the backhoe hydralics hooked up. If that is so how about with the snowblower attached. Thanks

Hello, I just put my snowblower back on my 24. Took off the bucket with no problem. The problem now is I cannot lift the snowblower. With engine spped up the front piston will barely move. I can raise it if I use a 2x4 as a pry bar and lift it while I have the lever in the up position. It is...

Any ideas for some kind of rake I can drag across a pond to clear out weeds ? Thanks

Any ideas for some kind of rake I can drag across a pond to clear out weeds ?

Another question... Some of my grass is on a hill. If I remove the FEL and Backhoe on my BX-24 will it seem less top heavy... less likely to tip, or should I leave the backhoe on on swing it either uphill or downhill ??? Thanks

I have a BX-24 and am having a very hard time replacing shear pins. I line up the holes and try to tap out the old one with various objects ( a new pin, a drift pin another harder bolt ) but it is almost like they are welded in. This happens first time and everytime since. Is there a special...

Does anyone here have the rear skid plate on alnog with the mid mount mower ?? My dealer tells me it won't work. Thanks

I have a BX 24 with a snowblower and a gravel driveway. I know a bad combination. This year I have broken more shear pins esp the fan one. I am having a very hard time driving out the old one. I have tried "never sieze" on the pins but no help. Any ideas.

What is the difference between the 60" mower and the "fine cut" ? My dealer tells me no difference other than thicker metal and 6". Thanks

I have a BX-24 with snow blower, box scrapper, grass catcher, skid plates, thumb and Payne forks. I took delievery the second week of Jan. 07. Due to circumstances beyond my control I have to sell it. What do you think it might be worth ??? Where would be the best place to advertise ? Thank You.