Search results

I've always been a stick welder and decided to try a wire feed welder. This 125/120v is an entry level piece and I'm getting the hang of it. I was hoping it would do spot welding on sheet metal but even at it's lowest amperage setting, it just blows right through. Is that the way it is or is...

I’ve got a LB1100 hoe. It’s almost impossible to get grease into the boom swing cylinder pivots. New zerks are in place. I’ve even tried removing the pins to investigate but they won’t budge. I’m able to move the rod end ever so slightly on the pin. I’ve tried putting the hoe in about every...

I'm curious as to how many people on this site own one of these machines, gear driven and G3038's as well. If so, what year, how many hours and what repairs done, if any. I have owned my 2013 G3033H with 422 hours for almost 2 years and replaced all filters and the backhoe bucket curl hose.

Do you have one, if so, what's its condition, year and hours?

I bought a LS fuel filter #40006997 and received it. It's in a factory looking box. Are they typically wrapped in plastic film and is there an O-ring included for the water sensor?

Anyone know if there's a website to lookup your tractor's VIN to find out the original dealer/location, service records, etc.?

I don't know if my rear tires are filled. Do I just rotate the tire until the valve stem is at 6'oclock and back out the valve core a few turns?

I can't get grease into the swing cylinder pins. I've installed new zerk fittings. I decided to remove the pins from the swing frame assembly to look for a reason why they won't take grease. After removing the nut and bolt that holds the pin in place, I tapped on the pin expecting it to drop out...

I screwed up today and bent the 3/8" thick steel piece that bolts to the front of the frame. Not sure if I can repair it. I've look for a replacement but can't find anything. Any ideas?

Anyone know what the operating temperature of the coolant ought to be in a '13 G3033H?

I'm checking to see if anyone has mounted one of Titan's bolt-on thumbs to a LS model LB 1100 backhoe. I've got some questions.

Looking for any and all opinions of a 1975 JD 830 tractor. I'm going to look at one. It's got a FEL and hoe. It shows 800 hours.s.

Where would be the best location to hook a chain on either end to be able to pull something heavy?