Search results

Hi I need to find a bolt for a B7100 for the bracket that fastens the seat to the tractor body. I was told it has to be a special bolt because it has to expand and contract with the heat for the tractor. I was also told a grade 5 or grade 8 won't work. The bolt is 1/2" x 1 1/4" I tried a...

Hi I have an older B7100HST. I was wondering what each bolt was for on the attached pictures. Is bolt #1 on the axle used for checking the level and filling? What are #2 and #3 used for. Does bolt #1 fill the entire case? Should I be able to see the oil level inside. How much fluid does entire...

Hello all, I have B7100 4WD (4100 hours) with a pto problem. I was cutting grass with a belly mower and the mower and tractor stopped dead. The pto would only turn 1 revolution then stop. Took the tractor into the dealer and they took off the mid pto and there was loose bearings in there. Not...

Hi I was mowing last night and the mower stopped with a bang. I disconnected the mower and tried to turn the mid pto as it is a belly mount and it turns about 1 revolution then grinds. The rear PTO does the same. Any ideas to the problem? Is it expensive to fix? Are parts even available? Should...

I have an older JD L130. The fuel line has to be replaced from the tank to where it connects under the frame. What is the easiest way to do this? Do have to drop the fuel tank? If so, how does the fuel tank unattach from the frame? Thanks

I have an Inland SA-48 (rear mount) on a Kabota B-7100 that has been working great. I started it up this AM and everything seems to be working except as soon as you hit a pile of snow, it bogs down and stops the snowblower but not the tractor. The auger, blades, and PTO are turning fine. Any...

Hi The pulley completely spun off today, ball bearings all over the place. Is this an easy fix? New bearings? Thanks Keith

Hi, I have an older B7100 HST about 4000 hours used light duty for grass cutting and snowblowing. My rad was recently leaking so I had it repaired and put it all back together. It worked once after that but it moved really slow, not much forward or backward speed. Today when I fired it up, the...