Search results

Anyone know what the front axel’s maximum load (weight) is on a Mahindra Max 24 with loader? This info isn’t printed and neither the dealer nor Mahindra USA will provide it.

My base 4WD tractor weighs 1750 pounds, and configured with loader and belly mower weighs roughly 2700 pounds. The max lifting weight of the loader is 900 pounds. I am having a few trees felled and having the rounds cut into 4 foot lengths. This comes to 600 pounds per round that needs to be...

Mahindra Max-24 This seems a silly question, but I am missing 2 bolts that hold down what appears to be a spring-tensioned-band, located underneath the seat pan cover plate, and behind and above the rear PTO assembly. The band when unbolted sits at a 45-degree angle and requires a bit of...

Mahindra Max-24 This seems a silly question, but I am missing 2 bolts that hold down what appears to be a spring-tensioned-band, located underneath the seat pan cover plate, and behind and above the rear PTO assembly. The band when unbolted sits at a 45-degree angle and requires a bit of...

I had really wanted a DC winch on my tractor but given the small size of the battery and equally underpowered alternator, those options were out. Buying a DC generator would work, but was just too much $$$, and didn't want a train of components. I also didn't want to buy 2000 feet of electrical...

I own a Mahindra Max 24, and am having midmount mower deck hydraulic lift issues. I have both removed and attached the MMM many times throughout the years without issue, but this springtime attachment has me puzzled. The MMM shares the same link functionality with the rear 3PH, and is supposed...

Americorp/Mahindra 60” Belly Mowing Deck. Having serviced the gearbox of my MMM, the steps as outlined in the manual is far too granular and unnecessary. The pulley on the gearbox doesn’t need to be removed. The casing doesn’t need to be separated either. There are two inset Allen screws on...

Operating my Max-24 while mowing lowers my rear PTO hitch to within a few inches from the grass. Going from a flat surface to an incline becomes interesting. Both mid and rear PTO vertical adjustments are tethered to the same handle and hydraulic feed. Is there a kit available that can separate...

Interesting that the Max24 and Max26 has the exact same motor (Mits S3L2), same displacement (80.4 CI), same compression ratio (22.1), and yet the Max24 has 24.4 hp at 2500 rpm while the Max26 has 25.6 hp at 2600 rpm. Is the 24 detuned or is the 26 governed at a higher rpm and gaining the extra...

Interesting that the Max24 and Max26 has the exact same motor, same displacement, same compression ratio, and yet the 24 has 24.5 hp while the 26 has 25.5 hp Is the 24 detuned or is the 26 governed at a higher rpm and gaining the extra 1 hp?

I was searching for a bracket that looked more professional than the hose clamp or square u-bolt approach. I found a couple nice aluminum billet choices that were $40+ per bracket. I finally found a similar one for $14.39 each. They looked great, and I'm patiently awaiting their arrival...

While I'm only 6' foot tall and skinny, I find my left knee constantly contacting the light switch which usually turns off the lights or activates the turn signals. I suppose I could drill new holes in the seating plate so that the seat goes back a bit farther, or relocating the entire lighting...