Search results

Was out moving dirt-- hard digging into old dirt pile, which causes the overload valve to bypass at times. After moving a few buckets of dirt with no issues, I was driving back to the pile when I got a phone call, turned off the tractor (bucket and implements off the ground), then restarted...

Going through heavy brush (very dense stringy 1" to 2") with a Bush Hog 278 the left side ("driver side") spindle sheared off. For those not familiar with the 278, there are two rotary cutters side by side, counter rotating. OK, well, that's expensive and of course the left side is the one...

Anyone remember threads about a type of temporary building that had a rigid roof and poles that seems to screw into the ground (or maybe there were stays that did that? Or perhaps I did not understand how they were erected and they were more like pole buildings)? These seemed to go up quickly...

5" of wet snow, pelting rain, and my TN70 is in a 3" water puddle that will freeze solid tonight. Tractor is flashing a Power Shuttle failure code 37-- at least the driveway is not blocked by the tractor, things could be MUCH worse considering the flooded ground all around the driveway! (with...

I read lots of posts, and I am inclined to think that a rollover box blade is more suitable for what I want to do. With the FEL at 81" and the tire track (outer edge) around 79-80", an 84" box would be a good idea. Maybe I missed a possible vendor, but it seems like the Woods R30 would be a...

When searching for more information on subsoilers (a different topic on burying RG-11) I found some references to invisible fencing for cattle: NewsNotes #47 -- Agricultural Environment Notes (search on invisible or use the page link) and Invisible fence uses GPS to keep cattle in | Special...

Is there a thread or site somewhere that lists the production history of the 1845/1850? In particular, a history of changes made by PT would be of use for buying used machines. For instance, from reading numerous threads here it sounds like in 2005 PT made significant changes (for example...

I have a TN70A and it looks like the Lift O Matic was never used (still covered with the black 'if it doesn't move paint it' goop). Also, I read the Operator's Manual (OP)... When I push down the locking lever are the pair of nuts on the end of the locking lever supposed to also rotate to...